Page 1
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Operation Manual Computerized Sewing Machine Product Code: 885-V14 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
Page 5
Use accessories recommended by the manufacturer as contained in this manual. The contents of this manual and specifications of this product are subject to change without notice. For additional product information, visit our web site at www.brother.com SAVE THESE INSTRUCTIONS.
Page 6
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY IMPORTANT •...
To obtain optional accessories or parts, contact the nearest authorized dealership. All specifications are correct at the time of printing. The part codes are subject to change without notice. Visit your Brother dealer for a complete listing of optional accessories available for your machine.
GETTING READY The various preparations required before starting to sew are described in this chapter. Turning the Machine On/Off ..................16 Power supply precautions ..................16 Turning on the machine ..................17 Turning off the machine ..................17 Understanding the LCD Screens................18 Changing the Machine Settings ................19 Changing the settings ..................19 Adjusting the brightness of the LCD ..............21 Winding/Installing the Bobbin.................22...
Page 47
Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to “Stitch Settings” (page 120). The optional walking foot is available through your Brother dealer. Replacing the Presser Foot 45...
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — GETTING READY Sewing Cylindrical or Large Pieces When sewing cylindrical or large pieces of fabric, remove the flat bed attachment.
Page 49
Sewing machine bed Note The optional wide table is available through your Brother dealer. Turn the screw at the bottom of each leg to adjust their height so the wide table will be level with the sewing machine bed.
SEWING BASICS The necessary preparations for sewing are described in this chapter. Sewing........................50 General sewing procedure .................50 Positioning the fabric ..................51 Starting to sew ....................52 Securing the stitching..................54 Cutting the thread ....................56 Adjusting the Thread Tension ..................57 Changing the tension of the upper thread ............57 Adjusting the Stitch Width and Length ..............58 Adjusting the stitch width ..................58 Adjusting the stitch length..................59...
UTILITY STITCHES The various stitches and their applications are described in this chapter. Selecting Stitching ....... 66 Reinforcement Stitching ....100 Selecting stitch types and patterns..66 Triple stretch stitching....100 Selecting stitching ......67 Bar tack stitching......100 Overcasting Stitches......71 Eyelet Stitching........102 Sewing overcasting stitches Decorative Stitching......103 using overcasting foot “G”...
—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Sewing overcasting stitches using the optional side cutter Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off.
Page 76
If the side cutter can no longer cut fabric, use a rag to apply a small amount of oil to the cutting edge of the cutter. The optional side cutter is available through your Brother dealer.
Pin on quilting foot b Presser foot holder screw c Needle clamp screw Note The optional quilting guide is available through your Brother dealer. Appliqué, Patchwork and Quilt Stitching 97...
APPENDIX The various maintenance and troubleshooting procedures are described in this chapter. Stitch Settings......................120 Utility stitches ....................120 Other stitches....................124 Care and Maintenance ..................126 Restrictions on oiling..................126 Cleaning the machine surface................126 Cleaning the race .....................126 Removing the needle plate ................127 Troubleshooting ....................128 Frequent troubleshooting topics...............128 Upper thread tightened up .................128 Tangled thread on wrong side of fabric............129...
If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at “ http://solutions.brother.com ” .
Page 152
Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 885-V14 Printed in China XE2408-301 5...