Brother MFC-J875DW Basic User's Manual page 144
Hide thumbs
Also See for MFC-J875DW:
- Specfications (2 pages) ,
- Service manual (329 pages) ,
- Advanced user's manual (97 pages)
Table of Contents
Advertisement
PhotoCapture Center™ Difficulties
Difficulty
Removable Disk does not work
correctly.
Cannot access Removable Disk
from the computer.
Part of my photo is missing when
printed.
Software Difficulties
Difficulty
Cannot install software or print.
"Device Busy"
Network Difficulties
Difficulty
Cannot print over the network.
The network scanning feature does
not work.
130
Suggestions
1
Take out the memory card or USB Flash drive and put it back in again.
2
If you have tried "Eject" from within Windows
USB Flash drive before you continue.
3
If an error message appears when you try to eject the memory card or USB
Flash drive, it means the card is being accessed. Wait a while, and then try
again.
4
If all of the above do not work, turn off your PC and machine, and then turn
them on again.
Make sure that you have correctly inserted the memory card or USB Flash drive.
Make sure that Borderless printing and Cropping are turned off. (See Advanced
User's Guide: Borderless printing and Cropping.)
Suggestions
®
(Windows
)
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the Touchscreen.
Suggestions
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (See Advanced User's Guide: Reports.) and
check the current Network settings printed in this list.
(MFC-J870DW and MFC-J875DW) Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
If you are using a wireless connection or are having Network problems,
see Software and Network User's Guide: Troubleshooting.
It is necessary to configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, enter the information
below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or call the software manufacturer.
(Macintosh)
Select Other from the Model drop-down list in the main screen of ControlCenter2.
In the Device Selector window, make sure Network is selected in the
Connection Type, and then click Browse. Reselect your network machine, and
press OK.
®
, take out the memory card or
Hide quick links:
Advertisement
Table of Contents
