Table of Contents
Advertisement
USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0
front or rear panel ports. With an installed USB 3.0 module, you can enjoy all
the benefits of USB 3.0 including faster data transfer speeds of up to 5 Gbps,
faster charging time for USB-chargeable devices, optimized power efficiency, and
backward compatibility with USB 2.0.
Intel
H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
PCI Express 3.0/2.0 x16 slot
This motherboard has one PCI Express 3.0/2.0 x16 slot that supports PCI Express
3.0/2.0 x16 graphic cards complying with the PCI Express specifications.
IRQ assignments for this motherboard
PCIEx16
Realtek 8111H LAN
Controller
USB 3.0 Controller
SATA Controller
HD Audio Controller
When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or
that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the
two PCI groups, making the system unstable and the card inoperable.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this connector.
The chassis intrusion sensor or switch sends a high-level signal to this connector
when a chassis component is removed or replaced. The signal is then generated
as a chassis intrusion event.
By default, the pins labeled "Intruder" are shorted with a jumper cap. Remove the
jumper caps only when you intend to use the chassis intrusion detection feature.
ASUS H110I-PLUS
A
B
C
shared
–
–
–
shared
–
shared
–
–
shared
–
–
shared
–
–
D
E
F
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
G
H
–
–
–
–
–
–
–
–
–
–
1-3
Hide quick links:
Advertisement
Table of Contents
