Table of Contents
Advertisement
2.6.3
System Agent (SA) Configuration
VT-d [Enabled]
Allows you to enable or disable VT‑d function on MCH. Configuration options: [Enabled]
[Disabled]
Graphics Configuration
Allows you to select a primary display from CPU, PCIE and PCI graphical devices.
Primary Display [Auto]
Allows you to select the primary display from CPU, PCIE and PCI graphics devices.
Configuration options: [Auto] [CPU Graphics] [PCIE]
iGPU Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi‑monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]
DVMT Pre-Allocated [32M]
Allows you to select DVMT 5.0 Pre‑Allocated (Fixed) Graphics Memory size used by
the Internal Graphics Device.
DVMT Total Gfx Mem [256M]
Allows you to select DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
DMI/OPI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI‑E 2.0 speed.
DMI Max Link Speed [Gen2]
Allows you to configure the DMI speed. Configuration options: [Auto] [Gen1] [Gen2]
[Gen3]
PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEx16_1 Link Speed [Auto]
Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64‑bit operating
systems. Configuration options: [Enabled] [Disabled]
2‑32
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
