FCC ID in the format FCC-ID: IHDP56KR2 on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Page 4
Motorola reserves the right to change or modify any information or specifications without notice or obligation.
Page 5
HELLOMOTO Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson. Speaker On/Off Key Smart Key Volume Keys PTT Button Audio Jack Left Soft Key Perform function in lower left Menu Key From home screen, open main menu. answer calls.
check it out Ready 10:05pm 10/23 Customizable r key that can be used to open the Settings screen Press and hold the Power Key few seconds, or until the screen lights up, to turn on your phone. Ready 10:05pm 10/23 for a Press the Navigation Key up, down, left or right...
main menu Call Alert Java Apps. • Java System Settings • (see next page) Ring Tones • Vibrate All: On/Off • Ringer • Vibrate • Silent • Position • Privacy • Interface Call Forward Datebook Memo My Info • My Name •...
settings menu Display/Info • Wallpaper • Text Size • Theme • Home Icons • Backlight • Clock • Menu View • Large Dialing • Language Phone Calls • Set Line • Any Key Ans • Auto Redial • Call Waiting •...
Use and Care To care for your Motorola phone, please keep it away from: liquids of any kind Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. If it does get wet, don’t try to...
essentials Caution: Before using the phone for the first time, read the Important Safety and Legal information included in the gray edged pages at the back of this guide. about this guide This guide shows how to locate a menu feature as follows: Find it: / >...
SIM card insert the SIM card Turn off your phone and remove your battery before you install or remove a SIM card. Carefully slide the SIM card into your phone, until it lies flat in the SIM card slot. Warning: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.
Page 14
2 Remove battery door. 3 Insert battery as shown below. Push the battery down until it snaps in place. 4 Replace the battery door. essentials battery charging New batteries are not fully charged. Note: See “Battery Use and Safety” on page 77.
Page 15
In this case, the battery charge will be maintained approximately between 80% and 95% of the battery's capacity. Cables and software drivers are available in Motorola Original data kits, sold separately. Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging.
charger from the wall will prevent the battery from overcharging. battery indicators The battery is at approximately 100% to 90% capacity when the indicator is blue and displaying three bars. The battery is at approximately 65% capacity when the indicator is green and displaying two bars.
2 You are prompted to enable security. Press - under Yes. A series of screens followed by the default home page displays. 3 Press @ to return to the home screen. make a phone call Enter a phone number and press ` to make a call or use a voice name.
To make a private call 1 Enter the Private ID you want to call. 2 Press and hold the PTT button. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. To end the call press @. Note: A Private call ends automatically if there is no activity on the call for a few seconds.
4 Select a type for the entry (Mobile, Private, Work1, Work2, Home, Email, Fax, Pager, IP or Other). To store a Private ID, choose Private. 5 Enter the number for the entry and press - under Done to save the entry. Tip: Before saving the entry, you can save more information.
holding the PTT button, even if the Private ID is not the type of number displayed. your phone number and Private ID Find it: / > My Info Tip: Want to see your phone number or Private ID while you’re on a call? Press / > My Info.
option Srvc Cntr No: Enter the phone number of your service center. If you do not know this number, contact your service provider. Expire After: This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded.
2 Select the message you want to read or press the number of the message you want to read. If the message fills more than one screen, scroll to read it. Tip: Scrolling through one message lets you view the next message. 3 To reply to the message, press - under Reply or to see all other choices, including forwarding and deleting the message,...
Page 23
use drafts When you save a message as a draft, it is saved in the drafts folder. Shortcut: From the home screen press - under Msgs > Drafts > Text Draft. 1 Select the draft you want to edit. You also have the choice to create new text messages from this menu.
manage memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space.
main attractions media center The media center lets you access pictures and audio recordings stored in your phone’s memory. The following audio recordings can be accessed through the media center: • Voice records • Musical ring tones in the list of ring tones •...
Image files supported by the Media Center include: Format Max. Image Size (in pixels) 640 x 480 .png 640 x 480 .gif 640 x 480 .jpg 127 x 127 .wbmp PTX features With Push To View features, your phone can send and receive the following items through Private calls with other phones that have this capability: •...
send messages The Push to Send Messages feature lets you send short text messages through Private calls. When you send a message, it appears on the display of the phone you are engaged in the Private call with. The message won’t be stored in the recent calls list.
send. Your message may be up to 400 characters long. You can choose from a list of ready-made words or short phrases called Quick Notes. You can use a Quick Note as it is or edit it before you send it. Editing a Quick Note changes the Quick Note for this message only and will not change the Quick Note on the list.
send a picture during a call 1 While in a Private call, press - under Picture or press / > Use PTT Feature > Send Picture. A list of pictures that can be included in a Private call appears. 2 Select the picture you want to send. 3 Press the PTT button to send the picture.
5 Once picture has been sent, when prompted press the PTT button to resume the call. receive a picture When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture.
set my info sending option You can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it. Find it: / > PT Manager > Configure > PTT My Info > Info to Send 1 Select or remove the fields you want to send.
2 Enter the Private ID number of the person you want to send the Contact information to or press - under Browse. 3 Select from Recent Calls, Contacts, or Memo. 4 Select the contact information you want to send and push the PTT button. turn PTT features on and off You can turn your phone’s ability to send and receive messages, pictures, and Datebook...
option Send Picture: Go to the first screen to send pictures. See “send pictures” on page 24. Send Event: Go the first screen to send a Datebook event. Send My Info: Go to the first screen to send My Info. See “send My Info” on page 26. Send Contact: Go to the first screen to send a contact.
Find it: / > Messages > [Create Message] > [Creat MMS Msg] 1 Select To and add the phone number or email address or select from Contacts or Recent Calls and press - under Back. Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press - under Remove.
reply to a message You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages. To reply to a message: 1 View the message you want to reply to. 2 To reply to the sender only, press - under Reply or if you wish to include all the people copied in the message, press -...
the body of your message in addition to these items. While you are filling in the Attach field, press [New] > Browse Pictures or Browse Audio. A list of available pictures, audio and voice recordings appears. Select the picture, audio or voice record you want to attach.
Page 37
2 Scroll to the attachment you want to remove. 3 Press / > Unattach. drafts While you are creating a message, you can save it in the MMS drafts folder before you send it. You can view, edit, send, or delete saved drafts.
MMS outbox MMS messages you have sent or tried to send are stored in the MMS Outbox. forward items from the outbox Shortcut: From the home screen press - under Msgs > Outbox > MMS Outbox. 1 Scroll to the message you want to forward.
4 Select the message or messages you want to delete. 5 Press - under Delete to confirm. receive a message When you receive an MMS message, a message notification appears on the display. 1 To view the message press r. 2 If the message fills more than one screen, use the navigation key to scroll down and read the remaining text.
Select from the following options: option Receive All: Tones sound during calls for all types of messages. Msg Mail Only: Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls. Delay All: Tones for all types of messages are held until you end calls.
view received messages from the message center Shortcut: From the home screen press - under Msgs > Inbox > MMS Inbox. use auto replies If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies for you to send.
send a call alert 1 View the message. 2 Highlight the Private number you want to alert. 3 Press / > Alert. 4 Push the PTT button. store message information to contacts If a message you receive contains a phone number, Private number, or an email address in the From field, the To field, the Cc field, the subject line, or the body of the message, you...
Page 43
save an embedded picture or audio recording To save a picture or audio recording that is part of the body of a message you receive: 1 View the message. 2 Highlight the picture or audio recording you want to save. 3 Press / >...
save a picture 1 View the slide show. 2 When the picture you want to save appears, press / > Save Picture. save audio 1 View the slide show. 2 Press / > Save Audio. 3 If the slide show contains more than one audio recording, a list of the audio recordings appears.
Page 45
option Signature: Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message. Quick Notes: Lets you create new Quick Notes and edit or delete Quick Notes you have created.
Page 46
2 Select [New Quicknote] or [New Reply]. 3 Enter text from the keypad. edit quick notes You can edit only Quick Notes and reply phrases you have created. 1 From the MMS Setup menu, select Quick Notes or Replies. 2 Select the Quick Note or reply phrase you want to edit.
Page 47
option 5 Messages: If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. 10 Messages: If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left.
2 Press / > MMS Inbox, MMS Drafts, or MMS Outbox > / > Delete Multiple, and check the messages you want to delete. 3 Select Delete All and press - under Yes to confirm. Note: Locked messages cannot be deleted from the Inbox.
Page 49
PIN, then enter 1234 as your phone’s PIN. 5 Press - under Ok. Note: This handset offers a Bluetooth auto pair feature with auto pair compatible Motorola devices. When bonded via Bluetooth with a certain device, the pin will not be required. connect your phone with another device Find it: / >...
Tip: If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily. use Bluetooth during a call You can connect with available Bluetooth devices during a call. Note: If the Handsfree Devices list contains only one device, then your phone will automatically try to connect to that device.
Page 51
4 Select the device you want to transfer the contact information to. Search for the device by selecting [Find Devices]. 5 If prompted, bond with the device. Your phone connects with the device and transfers the contact. send a Datebook event Find it: / >...
basics See page 1 for a basic phone diagram. display The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and `. Note: Your home screen may look different. Ready Date and 10:05pm 10/23...
3 Speaker Off: Sounds associated with Private calls are set to come through the earpiece rather than through the speaker. 4 Ringer Off: Your phone is set to not ring. 5 Message Indicator: Shows when you receive a text message. 6 Packet Data: Your handset is ready to transfer packet data or is transferring packet data.
Tip: When entering text, press and hold # to change letter capitalization (Abc > ABC > abc). word mode Word English Text Input lets you enter text into your phone by pressing keys just once per letter. Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word.
space after two seconds or when you enter a character on a different key. Characters scroll in the following order: characters Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥ A B C 2 Á...
navigation key Press the navigation key up, down, left, or right to scroll to items in the display. When you scroll to something, press r. handsfree speaker You can use your phone’s hands-free speaker to make calls without holding the phone to your ear.
features for the hearing impaired using your phone with a hearing aid For best results use the following optimization procedures and handset setting. They generally apply as well for users with cochlear implants: optimize your handset position and orientation While in a phone call slide your phone up and down, then left and right until best microphone coupling is obtained.
Approximate telecoil location is within 6-13 mm of this location. Approximate telecoil location is just above the battery. choose your hearing aid setting Find it: / > Settings > Phone Calls > Hearing Aid. 1 Set this option to Microphone. Microphone coupling is now optimized.
calls To make and answer calls, see page 13. recent calls The Recent Calls list contains information associated with calls you have made and received and call alerts you have received. When you send or receive Private calls, the Recent Call list contains the following PTT items with those calls: •...
Find it: / > Recent Calls 1 Scroll to or select the item you want to store. 2 Press - under Save to store the information as a new entry in the Contacts list. 3 If Save is not one or you options, press / >...
caller ID Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps. To block your phone number from being displayed for a specific outgoing call: 1 Press * 6 7..
emergency calls Your service provider programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted. Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or...
international access code (indicated by +). Then, press the keypad keys to dial the country code and phone number. You can additionally enable a predefined prefix to the dialing number by using Prepend dialing. Find it: / > Settings > Phone Calls > Prepend 1 Select Prepend and set it to On.
voice mail Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. receive a message When you receive a voice mail message, New VoiceMail Message appears on the display. To check voicemail messages press - under Call.
customize ring tones To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders: Note: Only ring tones stored in your phone’s memory are available in the ring tones list. Not all audio files can be assigned as ring tones.
notifications, pictures sent using Send via PTT, and Datebook reminders. Find it: / > Ring Tones > Vibrate All 1 Set this option to On or Locked. Setting this option to On lets you turn Vibrate All off by pressing the up volume control. Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off.
turning on the Auto Cycle feature located in the Wallpaper menu. backlight Set the amount of time that the display and java apps. backlights remain on, or turn off the backlight feature to extend battery life. Find it: / > Settings > Display/Info > Backlight datebook Find it: / >...
hide or show location information Your phone is equipped with a Location feature for use in connection with location- based services that may be available in the future. The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except for your local emergency response center.
other features advanced calling feature call waiting Find it: To accept the second call and put the active call on hold press - under Yes. To accept the second call and end the active call press Your phone rings with the second call for you to answer.
contacts feature Press - under Contacts. edit/delete contact entry Select a contact and press / > Edit. Change the desired content and press - under Done. Press - under Contacts. set ringer ID Select a contact and press / > Edit > Ringer. Select desired ringer, press - under Back, and - under Done.
feature receive To view the information datebook while still in the Private call press r. events via The 5 most recent events received from a Private ID are stored with the that Private ID on the recent calls list. To store events to the Datebook press - under Save while viewing the event you want to store.
feature set GPS To set the level of privacy for your GPS system press / > privacy options GPS > Privacy. If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want. change GPS Note: Your default GPS PIN is 0000.
Display > On. pc applications feature other PC For a list of complete PC applications applications visit www.motorola.com/support feature turn On TTY From the home screen press / > Settings > feature Phone Calls > TTY > Use TTY > On.
feature change the From the home screen press / > Settings > TTY baud rate Phone Calls > TTY > Baud. Select 45.45 or 50.00. change TTY While in the TTY call, press / > In Call Setup > TTY > Type. mode during a call Select from TTY, VCO or HCO.
RF energy. Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...
Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the mobile device in the intended use positions along side the head in...
This device supports Bluetooth 1.2 including HSP, HFP, OPP, DUN, PBAP, and BPP. In order for Bluetooth devices to communicate with one another, they must utilize the same Bluetooth profile. To determine the profiles supported by other Motorola devices, visit www.hellomoto.com/bluetooth. For other devices, contact their respective manufacturer.
Alternatively, you may return unwanted mobile devices and electrical accessories to any Motorola Approved Service Center in your region. Details of Motorola approved national recycling schemes, and further information on Motorola recycling activities can be found at: www.motorola.com/recycling Disposal of your Mobile Device Packaging and User’s Guide...
Symbol Key Your battery, charger, or portable radio may contain symbols, defined as follows: Symbol Definition Important safety information 032374o 032374o follows. Do not dispose of your battery 032376o 032376o or phone in a fire. Your battery or phone may require recycling in 032375o 032375o...
Service and Repairs If you have questions or need assistance, we’re here to help. Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1 (800) 453-0920 (United...
• Don’t let the phone or battery come in contact with water. Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly. Legal and Safety...
Page 82
Legal and Safety Motorola recommends you always use Motorola-branded batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as nvalid Battery or Unable to Charge, take the following steps: •...
• New batteries are not fully charged. • New batteries or batteries stored for a long time may take more time to charge. • Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging. Specific Absorption Rate Your model wireless phone meets the governmental requirements for exposure to radio waves.
0.72 W/kg, and when worn on the body, as described in this guide, is 1.03 W/kg. Body-worn measurements can differ, depending upon available accessories and regulatory requirements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in...
Page 86
Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user...
• That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; • That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and •...
Product registration is an important step toward enjoying your new Motorola product. Registering permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third...
Page 92
• Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. • When available, use a handsfree device.