LEGEND OF SYMBOLS Warning/ Grounding/ Electrical Hazard/ Waste/ Safeguarding the environment/ Recycling/ Use gloves and the plug should be removed from IMPORTANT SAFETY INSTRUCTIONS the electrical socket at the end of every Read the instructions carefully before cycle and before cleaning the appliance using, as they include important information for carrying out any maintenance work on safe installation, use and maintenance.
Page 3
• Improper connection of the equipment- SAFEGUARDING THE ENVIRONMENT grounding conductor can result in the • This appliance has been made of risk of an electric shock. recyclable or re-usable material. • Check with a qualified electrician or Scrapping must be carried out in service representative if you are in compliance with local waste disposal doubt whether the appliance is properly...
Assistance Before contacting Assistance: • Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting). • Restart the programme to check whether the problem has ceased to exist. • If the problem persists, contact the Authorised Technical Assistance Service.
Product Data (product fiche) Product Fiche WHIRLPOOL Brand ADG 211 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) 0.83...
Installation Electrical connection If the appliance must be moved at any time, keep it in an Before inserting the plug into the electrical socket, make upright position; if absolutely necessary, it may be tilted onto its back. sure that: • The socket is earthed and complies with current Connecting the water supply regulations;...
Advice regarding the first wash cycle The machine has a buzzer/set of tones to inform the user that After the installation, remove the stoppers from the racks and a command has been implemented: power on, cycle end etc. the retaining elastic elements from the upper rack (if any). The symbols/indicator lights/LEDs on the control panel/ display may vary in colour and may have a flashing or fixed Water softener settings...
Electrical Connection Electrical Connection As the colours of the wires in the mains lead may not If your appliance is supplied with a 13 amp. fused plug it can correspond with the coloured markings identifying the terminal be plugged into a 13 amp socket for immediate use. Before in your plug, proceed as follows: using the appliance please read the instruction below.
Description of the appliance Overall view Upper rack Upper spray arm Tip-up compartments Rack height adjuster Lower rack Lower spray arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel Control panel Select wash cycle button Low Salt indicator light ON-OFF/Reset button Wash cycle indicator lights...
Refined Salt and Rinse Aid Only use products which have been specifically designed Average autonomy Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day (Follow the instructions given on the packaging.) level °dH °fH...
Loading the racks Tips Upper rack Before loading the racks, remove all food residues from the Load this rack with delicate and lightweight crockery such as crockery and empty liquids from glasses and containers. No glasses, cups, saucers and shallow salad bowls. preventive rinsing is needed under running water.
Page 12
Unsuitable crockery Adjusting the height of the upper rack • Wooden crockery and cutlery. The height of the upper rack can be adjusted: high position to • Delicate decorated glasses, artistic handicraft and antique place bulky crockery in the lower rack and low position to make crockery.
Detergent and dishwasher use Measuring out the detergent Starting the dishwasher Good washing results also depend on the correct amount of 1. Open the door and press the ON/OFF button. detergent being used. Exceeding the stated amount does not 2. Measure out the detergent. (see detergent). result in a more effective wash and increases environmental 3.
Optimum performance levels when using the “Rapid 40’” cycle can be achieved by respecting the specified number of place settings. To reduce consumption, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: contact@whirlpool.com...
Care and maintenance Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They must be cleaned if you wish to achieve the best results in every wash. Clean the filters regularly.
• After checking and cleaning, switch the dishwasher on and off and start a new wash cycle. • If the problem persists, turn off the water tap, remove the plug and call the Service Centre. Whirlpool Europe s.r.l. - Viale Guido Borghi, 27 - 21025 Comerio (Varese) Italy www.whirlpool.eu...