Table of Contents
Advertisement
2.
Press the load lever with your thumb
(A), then move it to the right (B) until it is
released from the retention tab.
Do not remove the PnP cap yet from
the CPU socket. Doing so may bend
the pins of the socket.
3.
Lift the load lever until the load plate is
completely lifted.
4.
Position the CPU above the socket,
ensuring that the gold triangle mark is
on the bottom-left corner of the socket,
then fit the CPU notches to the socket's
alignment keys.
The CPU fits in only one orientation.
DO NOT force the CPU into the
socket to prevent bending the pins on
the socket and damaging the CPU.
2-4
Load plate
Gold
triangle
mark
Alignment
key
Chapter 2: Hardware Information
Load lever
Retention tab
CPU notches
Alignment
key
Advertisement
Table of Contents
