Page 1
Soundbar Owner's Manual Manual del Propietario FWSB405FS To obtain a more detailed Electronic Copy of this Manual or much further contents, go to Para obtener una Copia Electrónica más detallada de este Manual o mucho otras contenido, visite sanyo-av.com sanyo-av.com sanyo-av.c...
PRECAUTIONS Supplied Accessories Contents • SETUP MANUAL PRECAUTIONS • Remote Control (NC300UH) • Line-in cable IMPORTANT SAFETY INSTRUCTIONS ..........3 Your Soundbar Main unit .................... 6 Front panel of main unit............6 Back connectors of main unit..........6 Connections ..................7 Connect to TV.
The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Page 4
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. • Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. • For product recycling information, please visit - sanyo-av.com – 4 –...
Page 5
Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc.
Your Soundbar Main unit Front panel of main unit Lights up when Soundbar is on standby (Turned Off). 1 POWER ( Standby indicator ) Blinks when Soundbar is Turned On and audio output is Muted. AUX INPUT : Lights up when you switch to analog input source. 2 Source indicators LINE INPUT : Lights up when you switch to line in source(3.5mm jack).
Connections Connect to a device Connect to TV If your TV does not have audio outputs shown left, to connect the Soundbar directly to your other devices (Blu-ray player, game system, etc.) see your device’s user manual. Use a Coaxial (RCA) to Optical Toslink Line-in Cable Digital Audio Converter (not supplied) for our Soundbar which only has an...
Page 8
Plug the AC plug into an electrical outlet Turn Soundbar on For Bluetooth connections, refer to “Play audio through bluetooth”. Select the source Lights up when you switch to your connected source. Supplied cables used in this connection are as follows: •...
About the Remote Control Remote Control Button Specification Press to Turn On the unit, or to switch the unit into Standby mode. ( To completely Turn Off the unit, you must unplug the AC power cord.) Press to adjust volume up / down for Soundbar. Press to mute the sound and recover the sound.
Use your Soundbar Adjust the volume Adjusting the volume (default: level 10) 1) To increase or decrease volume, press VOL +/- on remote control. • To mute sound, press on remote control. – When the mute on, the POWER indicator on the front panel of main unit blinks in red. –...
Adjusting TREBLE and BASS level Adjusting the higher-pitched sound level: TREBLE (default: level ± 0) 1) To increase or decrease the level, press TREBLE K / L on remote control. Level LED display Behavior Lights up for 3 seconds Flashes 3 times Moves from right to left 3 times (default: level ±...
Play audio through bluetooth 1) Press on the remote control to switch the Soundbar to Bluetooth mode. 2) Turn On the Bluetooth compatible device. 3) On the Bluetooth device, switch on Bluetooth, search for and select SANYO_FWSB405F (see the user manual of the Bluetooth device on how to enable Bluetooth).
INFORMATION Troubleshooting Guide If the Unit does not perform properly when operated as instructed in this Owner’s Manual, refer to the following. Problem Corrective action – Check if the AC power cord is properly connected. No Power – Unplug the outlet once, and wait for 15-20 seconds and then plug it in again. –...
Español Conexiones Reproducción Para conectar a una TV, consulte Presione para encender su Soundbar. “Conexiones” en la página 7 y verifique las terminales de la TV, después conecte su Soundbar a la TV, y conecte el cable de energía CA. Para reproducir audio Presione el botón de fuente INPUT (Entrada) y confirme a través de un dispositivo Bluetooth, que se enciendan las luces del indicador de fuente INPUT...
Contact the Customer Care Center at: Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can sanyo-av.com result in delay. 1 866 212 0436 WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:...