Advertisement
Finishing a Flip
【DDJ-SX2】
Press the [FLIP START] button while pressing the [SHIFT] button.
The Flip playback is finished to go back to a normal playback.
【DDJ-SZ / DDJ-SX / DDJ-SR / DDJ-SP1】
Press the [PARAMETER (right)] button while pressing the [SHIFT] button.
The Flip playback is finished to go back to a normal playback.
･ You can also use performance pads to finish a Flip.
Please see the section [Using Saved Flip] for further details.
DDJ-SX2
Using Saved Flip
･ Saved Flip cannot be used in the DUAL DECK mode on DDJ-SX and DDJ-SX2.
※ For the 3 controllers, DDJ-SX, DDJ-SR, and DDJ-SP1, as the
[HOT CUE] mode button is lit in the same way both in HOT CUE and SAVED
FLIP mode, it is difficult to identify which mode is currently selected.
You need to be very careful not to mix up with the both modes.
Using performance pads to save a created Flip
Using performance pads to save a created Flip
to a slot
1)
Follow the steps in [Creating a Flip using Serato Flip] in the section
[Using Serato Flip] to create a Flip.
2)
Press the [HOT CUE] mode button when Hot Cue mode is selected on the
controller. SAVED FLIP mode is activated.
･ If you press the [HOT CUE] mode button again, it will be switched back
to the Hot Cue mode.
※ During SAVED FLIP mode, the LED of the [HOT CUE] mode button
on DDJ-SX2 and DDJ-SZ is changed to light blue.
HOT CUE mode on DDJ-SX2 and DDJ-SZ
DDJ-SZ
(Also for DDJ-SX, DDJ-SR, and DDJ-
SP1, use the [PARAMETER (right)]
button.)
HOT
CUE
SAVED FLIP mode on DDJ-SX2 and DDJ-SZ
HOT CUE mode on DDJ-SX
(For DDJ-SR and DDJ-SP1, use the [HOT CUE]
mode button in the same location as in the above.)
SAVED FLIP mode on DDJ-SX
(For DDJ-SR and DDJ-SP1, use the [HOT CUE]
mode button in the same location as in the above.)
3)
Press either one of the performance pads 1 ~ 6 to save a Flip to a slot.
･ When the performance pad 1 is pressed, a Flip is saved in Slot 1.
※ If no vacant slot exists, a Flip cannot be saved by pressing the
performance pad. Click the Flip slot delete button to delete any Flip
in a slot on the GUI.
8
8
Advertisement
