Advertisement
Quick Links
Download this manual
See also:
User Manual
HCU484/X Camera
Quick Install Guide
Installation
1.
Install the lens on the camera.
2.
Verify the signal format as set to NTSC (North America) or to
PAL (International).
3.
Connect the camera.
Set signal format
Video monitor
HJZTP keyboard controller
(optional)
4.
Apply power to the camera.
Program the Camera
Using the On-Screen Display Menu Controls On Camera
Rear
Document No. 900.0818 – 08/06 – Rev 1.00
NTSC
PAL
ENTER
LENS
12VDC
24VAC
VIDEO
-
+ -
RX
+
RX
Power
• Press and hold ENTER
2 seconds to access the
MAIN MENU.
• Press to enter a screen or
select a menu option.
!
"
,
Move horizontally to and
between menus and options.
#
$
,
Move vertically to and between
menus and options.
"..." indicates submenus
Using an Optional HJZTP Keyboard Controller
To control the camera using a Honeywell HJZTP keyboard
controller, you must first select a supported protocol and enter an
RS485 Camera ID #. Using the menu controls on the camera rear,
access the RS485 SETUP screen (MAIN MENU
SETUP
RS485 SETUP).
1.
In the PROTOCOL field, select either the Diamond (default)
or Pelco D protocol.
2.
In the CAMERA # field, select an RS485 Camera ID, from 1
to 255 (1 is the default).
3.
Select the camera ID on the HJZTP Controller.
Numerical
keypad
Preset
Iris Open
1. Select the Wide Dynamic Preset For Your
Scene
The table below explains the wide dynamic (WDR) presets and the
scenes for which they are optimized.
WDR Preset
Area of Interest
LOBBY
Center scene
LOADING DOCK
Center scene
ATM
Center scene
GAMING
Full scene spot glare
LICENSE PLATE
Full scene spot glare
OUTDOOR
Full scene
INDOOR
Full scene
2. Set the Day/Night Function
On the DAY/NIGHT SETUP menu (MAIN MENU
SETUP), select:
•
AUTO for automatic switchover from day mode to night
mode, OR
•
OFF to keep a color image at all times
3. Set the AGC
The Automatic Gain Control is set by the WDR preset chosen. You
can refine the AGC setting in the AGC menu (MAIN MENU
CAMERA SETUP
AGC).
The light level at which the camera changes from day mode to
night mode—and from night mode to day mode—is affected by
the AGC value. The higher the AGC value, the lower the light level
required to change from day to night.
CAMERA
• Press 90 on numerical
keypad + Preset to access
the MAIN MENU.
• Rotate the Joystick Up,
Down, Left, and Right to
navigate through the
menus and submenus.
• Press Iris Open to enter a
screen or select a menu
option.
WDR
Exposure
Wide
Shadows
Wide
Highlights
Ultrawide
Shadows
Medium
Highlights
Medium
Shadows
Ultrawide
Highlights
Wide
Highlights
DAY/NIGHT
Advertisement
Related Manuals for Honeywell HCU484
Summary of Contents for Honeywell HCU484
- Page 1 HCU484/X Camera Using an Optional HJZTP Keyboard Controller To control the camera using a Honeywell HJZTP keyboard Quick Install Guide controller, you must first select a supported protocol and enter an RS485 Camera ID #. Using the menu controls on the camera rear,...
-
Page 2: Frequently Asked Questions
Document 900.0818 - 08/06 - Rev 1.00 © 2006 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof.