Advertisement
Battery Grip BG-E7
!]~Instructions
Thank you for purchasing a Canon product.
The BG-E7 is a battery grip that can hold two Battery Packs LP-E6
or six size-AAILR6
batteries.
It is also equipped with a vertical-grip
shutter
button,
Main Dial,
etc.
to enable vertical shooting with the
same ease as horizontal
shooting.
• Attaching to the Camera
1. Remove the battery from the camera (Fig
.
1).
2. Detach the camera's battery compartment cover
(Fig. 2).
3.
Insert the detached cover into its storage slot to ensure that it
will not be lost
(Fig. 3).
4. Remove the protective
cover,
and then insert the electrical
contacts into the battery compartment (Fig.
4-CD).
5. Alig
n
the attachment screw with the camera 's tripod socket,
and then turn the attach/detach knob to tighten securely to the
camera
(Fig. 4-<D).
0 •
Be sure to attach the battery grip to the carnera before inserting
the
batteries.
The results of the battery check
·
m ay
not
be
displayed proper1y
if
you attach the battery grip to the camera
with the batteries already inside.
• Before removing the battery grip from the camera
,
be
sure to
turn the camera's power switch to
<OFF>,
and take out the
batteries. After removing the batteries, attach the protective
cover to the electrical contacts.
• Inserting the Battery Packs
1.
Slide the lever as shown by the arrow and open the cover
(Fig. 5).
2. Press both release levers outward in the battery compartment
,
and remove the battery magazine (Fig. 6).
3. Insert one or two Battery Packs LP-E6 in the orientation shown
on
the battery compartment cover
(Fig. 7).
4
.
Close the battery compartment cover until it clicks into place.
Ill
• If only one battery pack is
used,
it may be inserted in either the
right or left
sides.
• If two battery
pac_
k s are inserted, power iJ? supplied
simultaneously by both battery packs. Two battery packs
with
different charging levels can be inserted and used without any
problems.
• Remove the battery packs from the battery grip when the
camera will not be used for an extended
period.
• Inserting Size-AAILR6 Batteries
1. Insert the batteries into the Battery Magazine BGM-E6 (Fig.
8).
Make sure the
+
and- battery contacts are properly oriented as
shown in the illustration.
2
.
Turn over the battery magazine so lhat the inserted batteries
are facing
downward,
and then insert the battery magazine until
the release levers lock into place (Fig. 9).
3. Close the battery compartment cover until it clicks into place.
0 •
Fewer images can
be
shot when using size-ANLR6 batteries.
Also, fewer images can be shot depending on the battery brand
and storage conditions, and so usage of slze-AAILR6 batteries
is recommended only for emergencies.
• With size-AA/LR6 batteries, use six new batteries of the same
brand at temperatures above
20,C/68,
F. The camera may not
function when used in low temperatures or when old and new
batteries are used
together.
• Using a Household Power Outlet
To connect to a household power
outlet,
use the AC Adapter Kit
ACK-E6 (sold separately). (Refer to ACK-E6 Instructions.)
1. Connect the DC coupler plug to the AC adapter.
Connect the power cord to the AC
adapter,
and insert the
prongs into a power outlet.
2. Load the DC coupler into the left side of the battery
compartment (Fig. 1
0-CD),
and pass the cord through the cord
mount (Fig.
10-®
).
0
Do not connect or disconnect the power cord whi1e
the
camera's
power switch is set to
<ON>.
• Using the Battery Grip
• Turning the vertical-grip operation switch to <ON> (Fig. 11) makes
the battery grip buttons and dial function in the same way as those
on the camera.
•
When shooting
horizontally,
turn the vertical-grip operation switch
to
<OFF>
so that you do not accidentally use the buttons or dial
on the battery
grip.
• Hand Strap E-1 (sold separately) can be used for enabling a
more secure grip.
• The battery level can be checked on the LCD panel of the camera
and in the viewfinder.
• Specifications
Power
sources:
(1) One or two Battery Packs LP-E6
(2)
AA
alkaline/LR6 batteries x 6
(3) AC Adapter Kit ACK-E6
Power switch
:
Camera's power switch
Possible
shots:
Refer to your camera 's Instruction Manual
.
Working temperature range:
oo
c-
+40°C
/
32°F -104°F
Working
humidity: 85%
or less
Dimensions:
147.4 (W) x 114.3 (H)
x
76.9 (D) mm/
5.8 (W)
X
4.5 (H)
X
3.0 (D) in.
Weight:
Approx
.
340
g/
12.0
oz.
(not including the power
supply or battery magazine)
USA and Canada
only:
The Lithium ion/polymer battery is recyclable. Please
call 1-800-8-BATTERY for information on how to
recycle this
battery.
Le Canada et les Etats-Unis seulement
:
La batterie aux ions de lithium est recyc
lable.
Pour obtenir des renseignements sur les faf):ons
de recycler cette batterie
,
veuillez appeler au
1-800-8-BATTERY.
Los
EE.UU.
y Canada
solamente:
La bateria de ion de litio es reciclable. Llame por favor
1-800-8-BATTERY para Ia informaciOn sobre c6mo
reciclar esta bateria.
Advertisement
Table of Contents
