Table of Contents
Advertisement
Moving or Transporting the Product
When moving the product, see these sections to prepare and move the product, and set it back up after
moving it.
If you need to transport the product a long distance, contact Epson support.
Prepare to Move the Product
Removing the Media Guide Bar
Setting Up the Product After Moving
Attaching the Media Guide Bar
Prepare to Move the Product
Do the following before moving the product:
1. Remove any loaded media from the media feeding unit and auto take-up reel.
2. Turn off the product.
3. Remove the waste ink bottle.
4. Remove all cables.
5. If you need to move the product through a narrow passageway, remove the media guide bar.
6. Release the caster locks on the left and right legs and fully raise the stand fixing screws.
164
Advertisement
Table of Contents
