Statically Assign An Ip Address - D-Link DIR-600L User Manual
Wireless n 150 cloud router
Hide thumbs
Also See for DIR-600L:
- User manual (93 pages) ,
- Quick installation manual (56 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows
XP - Click on Start > Control Panel > Network Connections.
®
Windows
2000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address
on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not in
use on the network. Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-600L User Manual
89
- Quick Links:
- Hardware Overview
- Wireless Setup
Hide quick links:
Advertisement
Table of Contents
