CDX-V7800X SERVICE MANUAL E Model • The tuner and CD sections have no adjustments. Model Name Using Similar Mechanism CD Drive Mechanism Type MG-383K-121//K Optical Pick-up Name KSS-720A SPECIFICATIONS CD player section Power amplifier section System Compact disc digital audio...
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
SECTION 2 DISASSEMBLY Note : Follow the disassembly procedure in the numerical order given. 2-1. SUB PANEL (CD) ASSY 4 two claws 6 sub panel (CD) assy 3 claw 2 PTT 2.6x6 5 CNP800 1 PTT 2.6x6 2-2. CD MECHANISM BLOCK 7 bracket (CD) 6 PTT 2.6x6 5 CD mechanism block...
2-3. MAIN BOARD 4 screws (BTT) 6 MAIN board 5 screws (BTT) 3 PTT 2.6x8 2 PTT 2.6x8 1 PTT 2.6x8 2-4. HEAT SINK 7 heat sink 6 PTT 2.6x8 5 PTT 2.6x8 4 PTT 2.6x8 3 PTT 2.6x12 2 PTT 2.6x8 1 PTT 2.6x8...
2-5. CHASSIS (T) SUB ASSY 2 P 2x3 3 P 2x3 1 Unsolder the 4 chassis (T) sub assy lead wires. black white 2-6. LEVER SECTION 5 guide (disc) 6 lever (R) 3 tension spring (LR) 7 lever (L) 1 special screw 2 DISC IN SW board 4 claws...
2-9. FLOATING BLOCK ASSY 6 floating block assy 7 compression spring (FL) 1 tension spring (KF1) 8 compression spring (FL) 4 Fit lever (D) in the direction of the arrow. 5 Turn loading ring in the direction of the arrow. 2 damper (T) 3 damper (T) 2-10.
SECTION 3 DIAGRAMS 3-1. IC PIN DESCRIPTIONS • IC513 CXP81960M-659R (CD SYSTEM CONTROL) Pin No. Pin Name Pin Description A MUTE Audio mute control output — Not used. (Open) CD ON CD servo power supply control output RW/R RF amplifier gain control output (H: CD-RW, L: CD-R/CD-DA) SLD MINUS Sled motor control output SELF SW...
Page 16
Pin No. Pin Name Pin Description SENS Sensitivity input from DSP IC. IN SW Disc in switch input 65, 66 — Not used. (Fixed at H in this set) MP3 playback control input (H: not playback, L: playback) Photo coupler input 3 (Not used in this set) SCLK Serial clock output to DSP IC.
Page 17
• IC514 CL8830-PE0 (MPEG DECODER) Pin No. Pin Name Pin Description RESERVED Fixed at L in this set. 2 – 4 HDATA0 – 2 8-bit bi-directional host data bus 0 – 2 input/output — Power supply pin (+3.3 V) HDATA3 8-bit bi-directional host data bus 3 input/output —...
Page 19
Pin No. Pin Name Pin Description — Ground RESERVED Fixed at L in this set. VDATA3 Video data bus 3 output — Power supply pin (+3.3 V) VDATA4 Video data bus 4 output — Ground VDATA5 Video data bus 5 output RESERVED Fixed at L in this set.
Page 20
Pin No. Pin Name Pin Description Read/write strobe input in I mode. Read strobe input in M mode.
Page 21
• IC801 µPD17708GC-618-3B9 (SYSTEM CONTROL) Pin No. Pin Name Pin Description SIRCS Wireless remote commander input SELF SW Self switch input DOOR Front panel open/close detection input NOSE Front panel with/without detection input — Not used. (Connect to ground) SYSRST Rest output for slave microcomputer IC.
Page 22
Pin No. Pin Name Pin Description ANT ON Car antenna control output EZ SEL Rotary commander shift key input POWER ON System power on/off control and power amplifier control output 61 – 63 — Not used. (Open) ST IN FM stereo indicator input (L: FM STEREO ON, H: FM MONO ON) LCD CK0 Clock data output for LCD driver IC.
SECTION 4 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Color Indication of Appearance Parts The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety. •...
4-5. CD MECHANISM SECTION (3) (MG-383K-121//K) M901 M902 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3378-480-1 CHASSIS (OP) ASSY (INCLUDING M901)
SECTION 5 DISC IN SW DISPLAY ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
Page 48
DISPLAY LIMIT SW MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R935 1-216-864-11 METAL CHIP 1/16W < CAPACITOR > R936 1-216-045-00 METAL CHIP 1/10W R938 1-216-049-11 RES-CHIP 1/10W C401 1-163-007-11 CERAMIC CHIP 680PF R939 1-216-049-11 RES-CHIP 1/10W C402 1-163-007-11 CERAMIC CHIP...