hit counter script
Sanyo VPC-HD700 Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Digital Camera
  5. Xacti VPC-HD700
  6. Service manual
Sanyo VPC-HD700 Service Manual

Sanyo VPC-HD700 Service Manual

Digital movie camera
Hide thumbs Also See for VPC-HD700:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
SERVICE MANUAL
Digital Movie Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION ............................... 3
2. DISASSEMBLY ................................................................... 12
3. ELECTRICAL ADJUSTMENT ............................................. 17
5. TROUBLESHOOTING GUIDE ............................................ 23
6. PARTS LIST ........................................................................ 24
RoHS
•This product does not contain any hazardous substances prohibited by the RoHS
Directive.
WARNING
•You are requested to use RoHS compliant parts for maintenance or repair.
•You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow the
warning given on page 2 when carrying out repair work.)
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer's instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SG212/U, EX, GX, EX2, EX3, GX2, GX3, U2, U3 (R)
FILE NO.
VPC-HD700
(Product Code : 168 125 01)
(U.S.A.) (Canada)
VPC-HD700EX
(Product Code : 168 125 02)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)
VPC-HD700GX
(Product Code : 168 125 03)
(South America) (China)
(Australia) (Hong Kong)
(General) (Korea) (Taiwan)
VPC-HD700EXR
(Product Code : 168 125 05)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)
VPC-HD700EXBR
(Product Code : 168 125 07)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)
VPC-HD700GXR
(Product Code : 168 125 12)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(General) (Korea) (Taiwan)
VPC-HD700GXBR
(Product Code : 168 125 13)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(General) (Korea) (Taiwan)
VPC-HD700R
(Product Code : 168 125 14)
(U.S.A.) (Canada)
VPC-HD700BR
(Product Code : 168 125 15)
(U.S.A.) (Canada)
REFERENCE No. SM5310716

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VPC-HD700

Summary of Contents for Sanyo VPC-HD700

  • Page 1: Table Of Contents

    FILE NO. SERVICE MANUAL VPC-HD700 (Product Code : 168 125 01) (U.S.A.) (Canada) VPC-HD700EX Digital Movie Camera (Product Code : 168 125 02) (Europe) (U.K.) (South America) (China) (Australia) (Hong Kong) (Russia) (Middle East) (Africa) (General) (Korea) (Taiwan) VPC-HD700GX (Product Code : 168 125 03)
  • Page 2 WARNING Do not use solder containing lead. Note: This product has been manufactured using lead-free solder in If replacing existing solder containing lead with lead-free sol- order to help preserve the environment. der in the soldered parts of products that have been manufac- Because of this, be sure to use lead-free solder when carrying tured up until now, remove all of the existing solder at those out repair work, and never use solder containing lead.

  • Page 3: Outline Of Circuit Description

    1. OUTLINE OF CIRCUIT DESCRIPTION Pin 1 1-1. CCD CIRCUIT DESCRIPTION 1. IC Configuration The CCD peripheral circuit block basically consists of the fol- lowing ICs. IC903 (MN39630PMJ-A) CCD imager IC901 (AN20113A) V driver IC905 (AD9971BCPZRL) CDS, AGC, A/D converter, H driver, vertical TG Pin 15 2.
  • Page 4 3. IC901 (V Driver) 4. IC905 (H Driver, CDS, AGC and A/D converter) A V driver (IC901) is necessary in order to generate the clocks IC905 contains the functions of H driver, CDS, AGC and A/D (vertical transfer clock and electronic shutter clock) which converter.
  • Page 5 1-2. CP1 and VF1 CIRCUIT DESCRIPTION 1. Circuit Description 2. Outline of Operation 1-1. Digital clamp When the shutter opens, the reset signals (ASIC and CPU) The optical black section of the CCD extracts averaged values and the serial signals (“take a picture” commands) from the 8- from the subsequent data to make the black level of the CCD bit microprocessor are input and operation starts.
  • Page 6 4. Lens drive block 5. Video Clip Recording and Playback 4-1. Focus drive 5-1. Recording The 16-bit serial data signals (LENS_SD) and (LENS_SCLK The signal from the camera block is input to IC101 (ASIC). The and LENS_EN) which are output from the ASIC (IC101) are data that is input to the ASIC is input to SDRAM, and converts used to drive (FOCUS A +, FOCUS A -, FOCUS B + and FO- this data to encoded MPEG4 data, after which it is written in...
  • Page 7 1-3. PWA POWER CIRCUIT DESCRIPTION 1. Outline 3. Motor System Power Output This is the main power circuit, and is comprised of the follow- BOOST 5.3 V and USB_5V are output. Feedback for the 5.3 ing blocks. V output is provided to the switching controller (Pin (36) of Switching controller (IC501) IC501) so that PWM control can be carried out.
  • Page 8 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When FLCLT signal is input from the ASIC, the stroboscope CHG signal from microprocessor becomes High (3.3 V), the emits light.
  • Page 9 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
  • Page 10 BAT_TEMP Lithium battery temperature detection COMREQ Command request input Battery OFF detection signal input (L= OFF detection) BAT_OFF Serial communication request signal SREQ SCAN IN6 Keyscan input 6 IR_IN Infrared remote control communication input #RESET Reset input power monitoring XCIN Clock (32.768 kHz) XCOUT Clock (32.768 kHz)
  • Page 11 4. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scanning is carried out even when the power switch is turned off, so that the camera can start up again.

  • Page 12: Disassembly

    2. DISASSEMBLY 2-1. REMOVAL OF TB2 BOARD, ST1 BOARD, LENS AND CP1 BOARD When assembling, tighten the screws order. A → B → C When assembling, tighten the screws order. a → b → c → d 5, 19 When assembling, tighten the screws order.
  • Page 13 1. Two screws 1.7 x 3 41. CP1 board 2. Two screws 1.7 x 3 42. FPC 3. Open the cover battery. 43. Connector 4. Screw 1.7 x 4 44. Screw 1.7 x 3 5. Open the cover jack. 45. Three screws 1.7 x 3 6.
  • Page 14 2-2. REMOVAL OF CABINET RIGHT 1. Two screws 1.7 x 3.5 9. Heat sink rubber 2. Assy, lamp 10. Spacer lens right 3. Screw 1.7 x 3.5 11. Two screws 1.7 x 2.5 4. Unit control 12. Holder joint 5. Screw 1.7 x 2.5 13.
  • Page 15 2-3. REMOVAL OF LCD, VF1 BOARD AND TB1 BOARD When assembling, tighten the screws order. a → b When assembling, tighten the screws order. A → B → C → D → E 1. Screw 1.7 x 2 17. Remove the solder. 2.
  • Page 16 2-4. BOARD LOCATION VF1 board CA1 board ST1 board TB1 board CP1 board TB2 board – 16 –...

  • Page 17: Electrical Adjustment

    3. Pattern box (color viewer) from the following URL. Turn on the switch and wait for 30 minutes for aging to take http://www.digital-sanyo.com/overseas/service/ place before using Color Pure. It is used after adjusting the chroma meter (VJ8-0192) adjust color temperature to 3100 ±...
  • Page 18 3-6. The adjustment item which in necessary in part exchange CCD Black Point -6 V (A) CCD White Lens And White Point USB storage Gyro sensor Factory Voltage Language Reset Point Defect Defect Detect information zero offset Adjust- Cord Adjust- Setting Adjust- Setting...
  • Page 19 2. Lens Adjustment 3. AWB Adjustment Camera Camera Collimator Pattern box (color viewer) Preparation: Preparation: POWER switch: ON POWER switch: ON If using a ready-made collimator, set to infinity. Adjusting method: Note: 1. When setting the camera in place, set it to an angle so that Do not vibrate during the adjustment.
  • Page 20 Adjustment value determination 6. Gyro Sensor Zero Offset Adjustment a1<1023, a2<1023, a3<1023, a4<1023, a5<1023 Preparation: wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40 POWER switch: ON wnc0=128 ± 2, wnc1=128 ± 2, wnc2=130 ± 40 Note: 0<=g<=255 Do not vibrate after turning on the camera. 0<=o<=255 Adjustment method: 1401<ms1<=3600, 801<ms2<=2500, 1251<ms3<=3100,...
  • Page 21 3-8. Factory Code Setting 3-12. Firmware uploading procedure 1. Check the "Factory Code" display within the Setting group. 1. Uploading the firmware should be carried out if the version 2. For U.S.A., Canada and NTSC general area number (COMPL PWB XX-X) on the replacement circuit If "FC_SANYO_U"...

  • Page 22: Usb Storage Information Registration

    17.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: HD700 Serial: Rev. : 1.00 4.

  • Page 23: Troubleshooting Guide

    5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER PUSH THE POWER BUTTON SW FOR A WHILE IC301-23, 24 IC301-44 CHECK S3003 (KEY_1st, KEY_2nd) CHECK SW UNIT (SCAN OUT2) LEVEL INPUT PULSE INPUT IC501-26, 32 (PON) CHECK IC301, IC101, IC302-7 5.3 V Q5010-2 (PON2) CHECK IC501...

  • Page 24: Parts List

    645 094 1405 ADAPTOR,DOCKING STATION (Docking station) VPC-HD700,VPC-HD700R,VPC-HD700BR 645 093 6180 CABLE,DSC A/V-SG211 636 109 4061 CARTON INNER-SG212/EX, (Dedicated S-AV interface cable) EXCEPT VPC-HD700,VPC-HD700R, 645 080 4441 CABLE,DSC USB,SX812 VPC-HD700BR (Dedicated USB interface cable) 636 077 8139 CUSHION SHEET-SX774/KRO 645 080 4458...
  • Page 26 LOCATION PARTS NO. DESCRIPTION CABINET & CHASSIS PARTS 1 636 109 4313 ASSY,CABI M-SG212 636 106 8024 STAND-SG212/J, STAND 636 109 3873 COMPL,COVER BATT-SG212,VPC-HD700, VPC-HD700EX,VPC-HD700GX 636 109 4351 COMPL,COVER BATT-SG212 J2, VPC-HD700R,VPC-HD700EXR,VPC-HD700GXR 636 109 4368 COMPL,COVER BATT-SG212 J3,VPC-HD700BR, VPC-HD700EXBR,VPC-HD700GXBR 636 106 7959...
  • Page 27 Cabinet 1 SG212/J PARTS LIST 1...
  • Page 28 SPECIAL SCREW-1.7X3.0 411 199 0700 SCR TIN 1.7X2 411 184 6601 SCR PAN PCS 1.4X2.5, VPC-HD700,VPC-HD700EX,VPC-HD700GX 411 213 3601 SCR PAN PCS 1.4X2.5,EXCEPT VPC-HD700, VPC-HD700EX,VPC-HD700GX 411 175 5705 SCR PAN PCS 1.7X3, VPC-HD700,VPC-HD700EX,VPC-HD700GX 411 194 8206 SCR PAN PCS 1.7X3,EXCEPT VPC-HD700,...
  • Page 29 Cabinet 2 SG212/J PARTS LIST 2...

  • Page 30: Electrical Parts

    ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 31 LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION D5012 307 248 0701 DIODE MA21D3800 C1045 303 338 0309 CERAMIC 0.1U K 10V D5013 307 205 5206 DIODE RB521S-30 C1047 303 384 6409 CERAMIC 4.7U K 6.3V D5301...
  • Page 32 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION C5004 303 393 2607 CERAMIC 22U M 6.3V RB106 945 037 0817 R-NETWORK 0X4 1/16W C5005 303 384 6508 CERAMIC 10U K 6.3V RB107 945 037 4372 R-NETWORK 220X4 1/16W C5006 303 383 5007 CERAMIC 1U K 16V RB108...
  • Page 33 LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION LOCATION PARTS NO. DESCRIPTION R5044 301 258 6906 MT-GLAZE 20K DC 1/16W R1306 301 226 1506 MT-GLAZE 0.000 ZA 1/16W R5045 301 262 1300 MT-GLAZE 2.4K DC 1/16W R1307 301 226 1506 MT-GLAZE 0.000 ZA 1/16W R5051 301 224 8903...
  • Page 34 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R1861 301 257 4101 MT-GLAZE 100K DC 1/16W COMPL PWB,TB-1 R1863 301 257 4101 MT-GLAZE 100K DC 1/16W 636 106 9601 R1864 301 262 8804 MT-GLAZE 51K DC 1/16W R1866 301 257 4101 MT-GLAZE 100K DC 1/16W (SWITCH) R1867...

  • Page 35: Circuit Diagrams & Printed Wiring Boards

    CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING ............................C3 OVERALL CIRCUIT ............................C4 POWER CIRCUIT ............................. C4 CCD CIRCUIT ..............................C5 LENS CIRCUIT ..............................C5 MAIN CIRCUIT ..............................C6 SYSTEM CONTROL CIRCUIT ........................C7 STROBE CIRCUIT ............................
  • Page 36 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) µ 2. All capacitance values in " F" unless otherwise noted. µ p=pico farad ; ,u or U=micro farad µ 3. All inductance values in " H" unless otherwise noted. µ...

  • Page 37: Overall Wiring & Block Diagrams

    OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING JW181 MIC(L) MIC_L JW182 A_GND JW183 MIC(R) MIC_R JW184 A_GND JW101 JW651 JW102 JW171 HINGE SW1 HINGE SW1 GRAY SPEAKER JW652 HINGE SW2 HINGE SW2 JW172 BLACK CN951 ZOOM A+ ZOOM B+ CN141 ZOOM A- DATA3 ZOOM B-...

  • Page 38: Overall Circuit

    OVERALL CIRCUIT POWER CIRCUIT LENS UNIT POWER_IN, DC_IN IC521 CHG_CNT x5 F=3.5 FLASH UNIT CHRG LTC4061EDD BATCHGER CN141 BAT+ BATTERY TO BATTERY PROG CHARGE BATCHGI SD CARD TO SYA CN951 SOCKET JW541~544 CA1 BOARD CP1 BOARD ST1 BOARD IC903 IC901 V DRIVER IC971 IC951...

  • Page 39: Ccd Circuit

    CCD CIRCUIT LENS CIRCUIT IC951 CN951 BU2233GU LENS LENS DRIVER +12V(A) -6V(A) J4,J8 IC101 LENS O_LPF BOOST5.3V MVCC12,MVCC34 SYSTEM ASIC VDD3 MVCC56 Q9001 EV2MA CCDINP TCLKP AFECKP ZOOM_PI Vout IC905 TCLKN VDD3 DVDD AFECKN AD9971BCPZRL DOUT0P AFEDP0 IC903 DOUT0N Z_SENSE ZPIOUT CDS, AGC, A/D C AFEDN0...

  • Page 40: Main Circuit

    MAIN CIRCUIT ADCK 48MHz IC111 CCDEN,CCDSD,CCDCK IC905 CLOCK GENERATOR AFECK[P/N](LVDS) 74.17582MHz PL611S-26-777TCR AFESD0[P/N](LVDS) CDS,AGC,A/D C AFESD1[P/N](LVDS) (DMA) CN101 H.DEIVER TGHD,TGVD BOARD AD9971BCPZRL (CAA) X1102 XV[1:10],XSG[1:8],SUBGT,SUBCNT 48.000MHz OUTX,Y (DMA) PWA BLOCK PAON1,PAON3 SHUTTER+,ND_ON,ND_OFF POWER SUPPLY IC951 LENS_SCLK,LEN_EN,LENS_SD LENS LENS_MODE DRIVER STATE1,STATE2 FPIOUT,ZPIOUT USBHOST_CLK BU2233GU...

  • Page 41: System Control Circuit

    SYSTEM CONTROL CIRCUIT STROBE CIRCUIT AL3.2V CHARGING CIRCUIT UNREGSY BOOST5.3V BACKUP3.2V C5401 T5401 D5402 VDD2 VDD3 POWER FILTER OSCILLATION CN541 RECTIFIER C5412 VDD1 TRANSFORMER CIRCUIT BLOCK UNREGST 28:31 Q3001 IC302 XCIN RESET IC301 BATTERY X3002 BACKUP 32.768KHz BAT_OFF FLCTL BD4289FVM XCOUT 8bit MICRO- ZCHGDONE...

  • Page 42: Circuit Diagrams

    CIRCUIT DIAGRAMS CP1 BOARD (PWA) POWER DC JACK F5006 2A32V 1AV4J11B8060N L5002 JK501 D5003 UNREGST TO DMA FBMH1608HL300 RB060M-30 MJC-040-D1-2 DC_IN D5004 RB521S-30 L5008 L5001 D5005 FBMH1608HL300 RB060M-30 C5019 1AV4L2JU2R0MG POWER_IN 5.0X5.0 P1-12500/SG212-J TO DMB 22;B 6.3 H=3.0 D5006 2125 VOLTAGE: VIEW MODE.

  • Page 43: Ca1 Board Ccd

    CA1 BOARD CCD C2-12500/SG212-J VOLTAGE: VIEW MODE, LCD ON CN901 1AV4J11JS440G SUBGT +12V(A) C9011 1;B 16 -6V(A) 1608 +3.4V(A) CB905 VDD3 V. DRIVER VDREN XSUB SUBCNT XSG1 XSG1 XSG2 XSG2 R9012 47K;1/16J XSG3 XSG3 XSG4 XSG4 C9017 0.033;B XSG5 XSG5 1608 XSG6 XSG6...

  • Page 44: Cp1 Board (Caa) Camera

    CP1 BOARD (CAA) CAMERA +3.4V(A) +3.4V(A) VDD3 VDD3 C1-12500/SG212-J VOLTAGE: VIEW MODE, LCD ON CN101 1AV4J10JN440G SUBGT TO DMA SUBGT R9002 0;1/16Z +12V(A) +12V(A) R9003 IC904 -6V(A) -6V(A) 0;1/16Z NJM2877F3-03 +3.4V(A) +3.4V(A) QNJM2877F303P VDD3 VDD3 PAON3 C9111 0.1;B PAON3 TO DMA 3.0V VDREN VDREN...

  • Page 45: Cp1 Board (Dma) Main

    CP1 BOARD (DMA) MAIN D1-12500/SG212-J VOLTAGE: VIEW MODE, LCD ON C1308 D8 CLKIN R1306 R1033 0;1/16Z 1K;1/16J G2 LVDD CVDD VDD3 C1303 B6 VSS C8 XO IC132 B8 XI TC7WH32FK R1305 A8 BURNIN XDACK DACK QTC7WH32FK--K 6.2K;1/16D DREQ A6 R1 IC131 XDREQ A_VDD1.8...
  • Page 46 CP1 BOARD (DMA) MAIN [UPPER-LEFT] D1-12500/SG212-J VOLTAGE: VIEW MODE, LCD ON R1033 1K;1/16J A_VDD1.8 VDD3 VDD1.0 R1051 0;1/16Z VDD1.8 1608 AD18 AD17 AD16 AD15 AD14 AD13 AD12 AC13 R1052 0;1/16Z VDD_DDR1 VDD3 R24 VDD_DDR1 1608 T23 VDD_DDR1 A_VDD3 T24 VDD_DDR1 G14 VDD_DDR2 G15 VDD_DDR2 C1063...
  • Page 47 CP1 BOARD (DMA) MAIN [UPPER-RIGHT] C1308 R1306 D8 CLKIN R1033 0;1/16Z 1K;1/16J G2 LVDD CVDD VDD3 C1303 B6 VSS C8 XO IC132 B8 XI TC7WH32FK DACK R1305 QTC7WH32FK--K A8 BURNIN XDACK 6.2K;1/16D DREQ A6 R1 XDREQ IC131 XWRL B3 HVDD S1R72V17B00A20B XWRL QXXAGB015---P...
  • Page 48 CP1 BOARD (DMA) MAIN [LOWER-LEFT] EV2MA BAT+ T14 GND BAT+ T15 GND BAT+ T16 GND PLLEN BAT+ TO SYA PLLEN T17 GND QEV2MA------N BAT+ T18 GND LENS_SOUT TO TCA LENS_SOUT BAT+ U14 GND HOTLINE BAT+ HOTLINE U15 GND COMREQ BAT+ COMREQ U16 GND 16.0X16.0...
  • Page 49 CP1 BOARD (DMA) MAIN [LOWER-RIGHT] V2MA DSCKEB R2 DQ15 DSCKEA R3 VSSQ DSCKBN DSCKBN DSCKBP DSCKBP MA------N DSCKAN DSCKAN DSCKAP DSCKAP ASIC_SDO ASIC_SDI 0X16.0 ASIC_SCK ZSREQ ZSREQ TEST0 AF26 R1009 R1027 TEST1 AF27 0;1/16Z 0;1/16Z =1.39 VDD1.8 AVSS12A_PLLS1 AF19 1608 AVSS12A_PLLS0 AF18 C1012...

  • Page 50: Cp1 Board (Dmb) Audio & Video

    CP1 BOARD (DMB) AUDIO & VIDEO D2-12500/SG212-J CN110 1AV4J11B8420G HP_STBY HP_STBY HDMIINT HDMIINT G9 GND LVDSGND USB_D+ USB_D+ J2 TB6 USB_D- K2 TC0 USB_D- TO DMA VBUS VBUS H2 NC ZAVJACK RCLK- TO SYA RCLK- ZAVJACK J3 VDD DOCK_PON RCLK+ RCLK+ TO DMA DOCK_PON...

  • Page 51: Cp1 Board (Tca) Lens

    CP1 BOARD (TCA) LENS F1-12500/SG212-J VDD3 VDD3 VDD3 CN951 BOOST5.3V 1AV4J11NV231G ZOOM_A+ ZOOM A+ R9709 ZOOM_B+ ZOOM B+ 10;1/16J ZOOM_A- ZOOM A- P_GND ZOOM_B- ZOOM B- RB952 PILED ZOOM LED UP03396 Q9501 ZOOM VCC G8 NC MVCC34 Z_SENSE R9505 ZOOM SENSE FOCUS_B+ 22;1/6F F8 IN6A...

  • Page 52: Cp1 Board (Sya) System Control

    CP1 BOARD (SYA) SYSTEM CONTROL AL3.2V AL3.2V SW3.2V BOOST5.3V BOOST5.3V UNREGSY UNREGSY Y1-12500/SG212-J VOLTAGE: VIEW MODE, LCD ON C3016 ZSREQ BOOST5.3V COMREQ 300;1/16D IR_ON R3006 R3024 BAT_T TO DMA 47K;1/16J 1AV4U20B95400 ZAVJACK RPM7138-A3 UP03396 A3120 ZUSB_TRIG TO DMB Q3006 LCD0/Y0_ZBOOT TO DMA,DMB Q3004 IR RECEIVER...

  • Page 53: Circuit Waveforms

    ST1 BOARD STROBE CN543 1AV4J30B3730N BAT+ FLASH REFLECTOR BAT_T BAT- S1-12500/SG212-J TO BATTERY TTRN-0530-026-T VOLTAGE: STROBE AFTER CHARGE 1AV4L17B0560G CN541 FV02R80TP T5401 JW541 AWG30 1AV4J11JX400G D5402 BAT+ BROWN BAT+ 2.0X1.25 TPS65560RGTR QTPS65560RGTJ BAT+ IC541 BAT+ STROBE CHARGE JW543 AWG30 BAT+ PGND BLUE TRG+...

  • Page 54: Tb1 Board Hinge Sw

    TB1 BOARD HINGE SW VF1 BOARD LCD CONNECTOR & MIC CN172 1AV4J11VQ060G LCD AN LCD AN T1-12500/SG212-J JW651 AWG32 Z1-12500/SG212-J HINGE_SW1 LCD CA 2.0X1.25 LCD CA TO LCD 1AV4S10B5621G S6501 JW652 AWG32 ESE18R11BXK HINGE_SW2 LCD_AN 2.0X1.25 LCD_CA BLACK HINGE SW TO VF1 LCDD7 LCDD7...

  • Page 55: Printed Wiring Boards (P.w.b.)

    PRINTED WIRING BOARDS (P.W.B.) CP1 P.W.B. (SIDE A)

  • Page 56: Cp1 P.w.b. (Side B)

    CP1 P.W.B. (SIDE B)

  • Page 57: Ca1 P.w.b. (Side A & B)

    CA1 P.W.B. (SIDE A) CA1 P.W.B. (SIDE B)

  • Page 58: St1 P.w.b. (Side A & B)

    ST1 P.W.B. (SIDE A) ST1 P.W.B. (SIDE B) TB1 P.W.B. (SIDE A) TB1 P.W.B. (SIDE B) TB2 P.W.B. (SIDE A) TB2 P.W.B. (SIDE B)

  • Page 59: Vf1 P.w.b. (Side A & B)

    VF1 P.W.B. (SIDE A) VF1 P.W.B. (SIDE B) IC351...
  • Page 60 SANYO Electric Co., Ltd. Osaka, Japan Printed in Japan Oct./’07...

This manual is also suitable for:

Vpc-hd700exVpc-hd700gxVpc-hd700exrVpc-hd700exbrVpc-hd700gxrVpc-hd700gxbr ... Show all

Table of Contents