Setting Power Saving Functions; Setting The Color Temperature Manually; Specifying An Offset For The Auto White Balance Setting - Sony PDW-F800 Operation Manual
Professional disc camcorder
Hide thumbs
Also See for PDW-F800:
- Operation manual (318 pages) ,
- Brochure & specs (4 pages) ,
- Maintenance manual (300 pages)
Table of Contents
Advertisement
Setting power saving functions
You can limit the function of some output
connectors to save power consumption.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the POWER SAVE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 195.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
POWER SAVE page.
Item
ETHERNET/
a)
USB
i.LINK(FAM)
REC AUDIO
OUT
TEST OUT
SAVE
a) When MEMORY REC on the MEMORY REC
page of the OPERATION menu is set to
ENABL, the network connector and the USB
connector are enabled regardless of this setting.
b) The unit must be powered off and on again to
enable changes to this setting.
3
Turn the MENU knob to select the
desired setting, and press the MENU
knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
214
Adjustments and Settings from Menus
Description
Enables or disables the
network connector and USB
connector.
b)
Enables or disables the
i.LINK connector (FAM
function).
Puts the AUDIO OUT
connectors in EE or SAVE
mode.
Switches the TEST OUT
connector power saving
function on and off.
ON: No signals are output if
a cable is not
connected.
OFF: Signals are always
output, regardless of
whether a cable is
connected.
Setting the color temperature
manually
You can manually adjust the value of the white
balance by setting the color temperature.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the WHITE page of the PAINT
menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 195.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
WHITE page.
Item
Description
COLOR
Sets the color temperature for
TEMP <A>
the desired value. Adjust the
value while looking at the real
image because error tends to be
bigger for adjustment of high
color temperature.
C TEMP
Adjusts the value more
BAL <A>
precisely when the color
temperature adjustment
through COLOR TEMP is not
satisfactory.
R GAIN <A> Changes only the value of R
GAIN.
B GAIN <A> Changes only the value of B
GAIN.
The above table shows the adjustment of the
white balance of channel A. Items followed
by <B> are used to adjust the white balance
of channel B.
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Specifying an offset for the auto
white balance setting
By setting an offset for the value of auto white
balance, you can make the picture warmer or
colder.
Advertisement
Table of Contents
