Functions That Can Be Assigned To The Assign. 2 Switch; Functions That Can Be Assigned To The Assign. 1 And 3 Switches; Button - Sony PMW-350K Operating Instructions Manual
Solid-state memory
camcorder
Hide thumbs
Also See for PMW-350K:
- Operating instructions manual (183 pages) ,
- Manual (37 pages) ,
- Brochure & specs (35 pages)
Table of Contents
Advertisement
Functions That Can Be Assigned to the ASSIGN. 2 Switch
Note
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the
switch at that point may not match the camcorder's internal state. After assigning a function, switch the ASSIGN. 2
switch or power the camcorder off and on again.
Assignable switch setting Function
Off
Front Mic
Marker
a)
Picture Cache
Zebra
b)
Digital Extender
Note
a) When Picture Cache is assigned, OPERATION >Rec
Function in the setup menu is disabled (displayed in
grey) to keep the setting unchanged.
Functions That Can Be Assigned to the ASSIGN. 1 and 3 Switches, the
ASSIGNABLE 4 and 5 Switches, and the COLOR TEMP. Button
Assignable switch
setting
Off
Front Mic
Marker
Last Clip Delete
ATW
ATW Hold
EZ Mode
Turbo Gain
Rec Review
Rec
Picture Cache
Freeze Mix
Spotlight
Backlight
EVF Mode
BRT Disp
No assignment
Switch between stereo and monaural when a stereo microphone is connected.
Turn the display of all markers on or off.
Turn the picture cache function on or off.
Turn zebra display on or off.
Turn the screen magnification function on or off when the optional CBK-CE01 50
Pin Interface and Digital Extender is installed.
Function
No assignment
Switch between stereo (On) and monaural (Off) when a
stereo microphone is connected.
Turn the display of all markers on or off.
Delete the most recently recorded clip.
Turn ATW (auto tracing white balance) mode on or off.
Hold the white balance setting in the ATW mode.
Execute EZ mode according to the setting of OPERATION
>TLCS.
Execute Turbo Gain according to the setting of
OPERATION >Gain Switch >Gain Turbo.
Conduct a recording review.
Start or stop recording.
Turn the picture cache function on or off.
Execute the freeze mix function.
Turn the spotlight function in auto iris mode on or off.
Turn the backlight function in auto iris mode on or off.
Switch the viewfinder screen between B&W (On) and color
(Off).
Turn the display of the brightness level on or off.
b) When the digital extender function is turned on, it is
not possible to show the return video.
Assigning Functions to Assignable Switches
State when camcorder
is next powered on
—
Setting retained
Setting retained
—
Setting not retained
—
Setting retained
Setting not retained
—
—
Setting retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained
139
Advertisement
Table of Contents
