Advertisement
Advertisement
Table of Contents
Summary of Contents for Siemens MSK
-
Page 1: Instruction Manual
Instruction Manual Mini Band Saw 14823.7 - Setembro/2008... - Page 2 UNDER NO CIRCUNSTANCES place your hands in the moving parts of the machine while it is being used. MAKE SURE the machine has come to a complete stop before acessing the processed ingredients. 10 ELECTRIC DIAGRAM MOD. MSK and MSKL...
- Page 3 CAUTION: The machine is not protected against water jets. Do not clean it with steam jets, or high pressure blasts or similar methods. Under no circumstances should the 09 General Advices MSK and MSKL be hose rinsed as this may result in short circuit or serious damage to the machine. 10 Electrical Diagram Clean the body of the machine with a damp clean cloth and wipe dry.
- Page 4 NOTICE TO OWNERS AND OPERATORS The purpose of this adjustment is to centralize the blade on the gear and avoid it The MSK and MSKL Mini Band Saws are designed to cut food products safely falling down. and efficiently. Unless the operator is properly trained and supervised, however, there is the possibility of a serious injury.
-
Page 5: Main Components
To have access to the belt remove the screws with a screwdriver from the inferior 01- Blade Calibrator Knob back lid and take it out. 02- Wheels Diameter 225 MSK / MSKL 03- ON/OFF Switch. With a screw-wrench No.02 loosen the screws No.01 turning it counter-clockwise. -
Page 6: Technical Data Table
3 TECHNICAL DATA 5 PRE OPERATION Table - 01 Check if the machine is firm, no movement is allowed on the supporting surface . Technical Data Units MSKL Wash with warm water and soap all the food-contact parts, and wipe dry. To do it 110 / 220 (*) 110 / 220 (*) Voltage proceed as follows (the reference numbers below are those of the picture 01):...