Table of Contents
Advertisement
Copying already created option output data
You can produce copies of option output data between sewing machines not using the programmer, but by using the CF
card instead.
Referring to the sewing machine adjustment manual, carry out the data read/write mode [r11] operation on the copy
destination sewing machine.
Deleting extended option output data from the sewing machine
1. Have the programmer at hand.
according to the operation of the extended option output (see page 146).
2. Delete the extended option output data from the sewing machine by using
3. Press
to turn the programmer light off. Turn off the power then turn it back on again.
Read sewing data to carry out sewing operation. Confirm that the extended option output data has been
deleted.
The extended option output data remains on the CF card. To register it again, carry out the data read/write mode
[r11] operation on the sewing machine.
As an alternative to deleting the extended option output data, you can use one of the operations for clearing data
stored in the sewing machine: deleting the extended option output data or deleting all stored data.
Display the extended option output home screen (shown below)
PD-3000
CHAPTER 5 EXTENDED OPTION OUTPUT
.
163
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
