hit counter script
Hitachi PC-ARF Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Thermostat
  5. PC-ARF
  6. Installation and operation manual

Hitachi PC-ARF Installation And Operation Manual

Hitachi pc-arf remote controller
Hide thumbs Also See for PC-ARF:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

INSTALLATION AND OPERATION MANUAL
MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO
INSTALLATIONS- UND BETRIEBSHANDBUCH
MANUEL D'INSTALLATION ET DE FUNCTIONNEMENT
MANUALE D'INSTALLAZIONE E D'USO
REMOTE CONTROLLER
PC-ARF
Meeting Room
A/C
MODE SPEED LOUV.
COOL
HIGH
LOUV.
ADJ
OK
MANUAL DE INSTALAÇÃO E DE FUNCIONAMENTO
BRUGER- OG MONTERINGSVEJLEDNING
INSTALLATIE- EN BEDIENINGSHANDLEIDING
HANDBOK FÖR INSTALLATION OCH ANVÄNDING
FLTR
TEMP
?

Advertisement

Table of Contents
loading

Related Manuals for Hitachi PC-ARF

Summary of Contents for Hitachi PC-ARF

  • Page 1 MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO BRUGER- OG MONTERINGSVEJLEDNING INSTALLATIONS- UND BETRIEBSHANDBUCH INSTALLATIE- EN BEDIENINGSHANDLEIDING MANUEL D’INSTALLATION ET DE FUNCTIONNEMENT HANDBOK FÖR INSTALLATION OCH ANVÄNDING MANUALE D’INSTALLAZIONE E D’USO REMOTE CONTROLLER PC-ARF Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV.
  • Page 4 CAUTION PRECAUCIÓN VORSICHT PRECAUTION ATTENZIONE CUIDADO FORSIGTIG LET OP...
  • Page 5 DANGER PELIGRO GEFAHR DANGER PERICOLO PERIGO FARE GEVAAR FARA KINAYNO CAUTION PRECAUCIÓN VORSICHT PRECAUTION ATTENZIONE CUIDADO FORSIGTIG LET OP VARSAMHET NOTE NOTA HINWEIS REMARQUE NOTA NOTA BEMÆRK OPMERKING...
  • Page 6 INDEX NDICE Í INHALTSVERZEICHNIS INDEX INDICE ÍNDICE...
  • Page 7 INDHOLDSFORTEGNELSE INHOUDSOPGAVE INNEHÅLLSFÖRTECKNING English Original version...
  • Page 9 1 SAFETY SUMMARY N O T E D A N G E R C A U T I O N Where there is oil vapor and the oil is dispersed. Where the hot springs are near (in a sulfuric environ- ment).
  • Page 10 2.2 BEFORE INSTALLATION Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 INSTALLATION SPACE > 50mm 2.4 INSTALLATION PROCEDURES Draw-out Hole Groove for...
  • Page 11 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 ELECTRICAL WIRING N O T E REMOCON REMOCON REMOCON REMOCON C A U T I O N 50mm 100mm...
  • Page 12 4 SWITCH NAMES AND FUNCTIONS Schedule Timer Indicator Fan Speed Indicator Room Name Indicator Indicator Operation Mode Indicator FLTR Filter Sign Indicator Operation Guide Indicator Meeting Room FLTR MODE SPEED LOUV. TEMP COOL Run Indicator HIGH Setting Temperature Indicator LOUV. Operation Part N O T E...
  • Page 13 5 CHECKING PROCEDURE RTN. SEL. N O T E...
  • Page 14 6 FUNCTION SELECTION AND SETTING Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3 Output1...
  • Page 15 Items Optional Function Individual setting Setting condition Contents × × × × × × × × ×...
  • Page 16 Items Optional Function Individual setting Setting condition Contents × SLOW SLOW × ×...
  • Page 17 Items Optional Function Individual setting Setting condition Contents × × × × × × × × × × × × × × ×...
  • Page 18 Items Optional Function Individual setting Setting condition Contents × × × × × N O T E...
  • Page 19 Port Input/Output indication Setting item Indication Indication Input Output N O T E...
  • Page 20 7 ELEVATING GRILLE SETTING/CANCELLATION Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3 CN8 1-2 Output3...
  • Page 21 8 LOUVER SETTING Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL.
  • Page 22 9 CONTACT INFORMATION REGISTRATION Contact Information 1 Sym.1 € Sym.2 < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN. 10 CHECK MENU Function...

  • Page 23: Basic Operation

    11 OPERATION METHOD 11.1 BASIC OPERATION Meeting Room Meeting Room MODE SPEED LOUV. TEMP MODE SPEED LOUV. TEMP HEAT COOL HIGH SPEED MODE LOUV. 11.2 OPERATION MODE (COOLING, HEATING, DRY, COOLING/HEATING AUTOMATIC AND AIR FLOW OPERATION) Function Connecting Meeting Room MODE SPEED TEMP...

  • Page 24: Temperature Setting

    12 SETTING METHOD 12.1 TEMPERATURE SETTING N O T E Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 FAN SPEED N O T E Meeting Room MODE SPEED TEMP COOL HIGH MODE TEMP HIGH 2...

  • Page 25: Operation Start

    12.3 SWING LOUVER DIRECTION Meeting Room Meeting Room MODE SPEED LOUV. TEMP MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP N O T E N O T E 13 OPERATION 13.1 OPERATION START N O T E Meeting Room MODE SPEED LOUV.
  • Page 26 13.2 OPERATION STOP N O T E Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 OPERATION LOCK Meeting Room MODE SPEED TEMP COOL HIGH SPEED N O T E Meeting Room MODE SPEED TEMP COOL HIGH 14 MENU OPERATION 14.1 MENU Menu 15:10(Fri)
  • Page 27 14.2 FILTER SIGN RESET N O T E FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. 14.3 ELEVATING GRILLE N O T E C A U T I O N Menu 15:10(Fri)
  • Page 28 Elevating Grille UPDW 00-00 01-01 Elevating Grille:All UPDW 02-02 Press to raise/lower grille SEL. ENT. RTN. RTN. N O T E Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 SIMPLE TIMER OPERATION 15:10(Fri) Menu Simple Timer 15:10(Fri) Filter Sign Reset Timer Ope.
  • Page 29 N O T E Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 SCHEDULED OPERATION Example: 14.5.1 Schedule setting Weekly Schedule Setting 15:10(Fri) Menu 15:10(Fri) Filter Sign Reset SEL. ENT. RTN. Elevating Grille Function 3 Simple Timer Weekly Schedule Setting 15:10(Fri) Schedule Timer SEL.
  • Page 30 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH Holiday Setting 15:10(Fri) SPEED SEL. HOL. ON/OFF ENT. RTN.
  • Page 31 14.5.3 Schedule ON/OFF setting 15:10(Fri) Schedule ON/OFF Menu 15:10(Fri) Turn ON schedule function? Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. SEL. ENT. RTN. N O T E 15:10(Fri) Schedule Timer Day/Time Setting Holiday Setting Schedule ON/OFF SEL.
  • Page 32 14.6.2 Cancellation of louver setting Louver Setting Menu 15:10(Fri) 01-01 Louver Setting 01-02 Louver Open/Close 01-03 VENTI 01-04 Total Heat Exchanger SET Select unit to set. Function 10 SEL. ENT. RTN. SEL. ENT. RTN. N O T E Louver Setting Louver Setting Cancel INDV Louver SET Louver Setting:01-03...
  • Page 33 14.7 LOUVER OPEN/CLOSE Louver Open/Close Open louver? Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET SEL. ENT. RTN. Function 10 SEL. ENT. RTN. N O T E 14.8 VENTILATION Function VENTI SEL'D UNIT A/C + VENTI N O T E ENT.
  • Page 34 14.9 SETTING OF TOTAL HEAT EXCHANGER Total Heat Exchanger SET VENTI Mode THEX VENTI N O T E ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Total Heat Exchanger SET Function 10 Fix setting of total heat exchanger? SEL.

  • Page 35: Temperature Unit

    14.11 LANGUAGE SETTING Language Setting English Français Adjusting Date/Time Deutsch Screen Display Setting Italiano Function 13 Español SEL. ENT. RTN. SEL. ENT. RTN. Language Setting Screen Display Setting Display Adjustment Initialize room name and Language Setting contact info. to switch Temperature Unit language? SEL.
  • Page 36 14.13 SCREEN DISPLAY SETTING 14.13.1 Function Display Adjustment Adjusting Date/Time Time Format 24Hour(11:04) Brightness Function 13 Back light 15 Seconds Contrast On/Off lamp SEL. ENT. RTN. SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit Display Adjustment SEL.
  • Page 37 14.14 ROOM NAME REGISTRATION Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Room Name Sym.2 €...
  • Page 38 15.2 INDICATORS ON LCD About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. UPDW : Grille has not been correctly positioned. : Operation mode is locked. FLTR : Clean Air Filter. Help Menu Next Page RTN. About Indication About Operation Troubleshooting Contact Information Help Menu...

  • Page 39: Troubleshooting

    15.4 TROUBLESHOOTING Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product. Next Page RTN.

  • Page 40: Other Indications

    16 OTHER INDICATIONS 16.1 IN NORMAL CONDITION 16.1.1 Central control 16.1.4 Operation control Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED TEMP HEAT HEAT Central Control HOT-ST LOUV. Turned ON Turned ON 16.1.2 Thermo-controller Meeting Room MODE SPEED LOUV.
  • Page 41 16.2 IN ABNORMAL CONDITION 16.2.1 16.2.3 Electric noise 16.2.2...
  • Page 43 1 RESUMEN DE SEGURIDAD N O TA P E L I G R O P R E C A U C I Ó N En las proximidades de manantiales de agua caliente (entornos sulfúricos). Donde se detecte generación, acumulación, fugas o Entornos ácidos o alcalinos.
  • Page 44 2.2 ANTES DE LA INSTALACIÓN Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 ESPACIO NECESARIO PARA LA INSTALACIÓN > 50mm 2.4 PROCEDIMIENTOS DE INSTALACIÓN Draw-out Hole Groove for...
  • Page 45 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 CABLEADO ELÉCTRICO N O TA REMOCON REMOCON REMOCON REMOCON P R E C A U C I Ó N 50mm 100mm...
  • Page 46 4 NOMBRE Y FUNCIONES DE LOS INTERRUPTORES Zonas de la pantalla Indicador de programación del temporizador Indicador de la veloci- dad del ventilador Indicador del nombre de la habitación oscilante Indicador de bloqueo del funcionamiento Indicador de modo de funcionamiento Ftro Indicador de guía de funcionamiento...
  • Page 47 5 PROCEDIMIENTO DE COMPROBACIÓN Unidades en prueba ajustadas: 5 MODO FRIO VEL. MEDIA AJST MARCHA VLVR N O TA...
  • Page 48 6 SELECCIÓN DE FUNCIONES Y AJUSTES Menú de prueba de funcionamiento Prueba de funcionamiento Selección de funciones Selección del termistor Entrada/salida Función 5 VLVR Selección de funciones Todos 01-01 01-02 01-03 01-04 VLVR Selección de funciones: 01-03 Entrada/salida: 01-03 Elemento Ajuste Elemento Ajuste...
  • Page 49 Condiciones Elem. Función opcional Contenido individual × × × × × × × × ×...
  • Page 50 Condiciones Elem. Función opcional Contenido individual × ×...
  • Page 51 Condiciones Elem. Función opcional Contenido individual × × × × × × × × × × × × × × ×...
  • Page 52 Condiciones Elem. Función opcional Contenido individual × × × × × × N O TA...
  • Page 53 Pantalla del número de entrada Puerto Indicación de Entrada/Salida Indicación Indicación Entrada Salida N O TA...
  • Page 54 7 AJUSTE/CANCELACIÓN REJILLA ARRIBA/ABAJO Entrada/salida: 01-03 Entrada/salida: 01-03 Elemento Ajuste Conector Elemento Ajuste Conector Entr. 1 CN3 1-2 Entr. 1 CN3 1-2 Entr. 2 CN3 2-3 Entr. 2 CN3 2-3 Salida 1 CN7 1-2 Salida 1 CN7 1-2 Salida 2 CN7 1-3 Salida 2 CN7 1-3...
  • Page 55 8 AJUSTE DEL DEFLECTOR Menú 15:10(Vi) Ajuste del deflector Deflector Abierto/Cerrado Encendido A/C, ventilación Ajuste interc. calor total Función 10 VLVR Ajuste del deflector Ajuste del deflector Cancelar AJ. Deflec. INDIV. VLVR Ajuste del deflector 01-01 01-02 01-03 01-04 Seleccionar la unidad para ajustar. VLVR Ajuste del deflector: 01-03 Ajus.
  • Page 56 9 REGISTRO DE INFORMACIÓN DE CONTACTO Información de contacto 1 ‘ € Sim.1 Sim.2 < > ñ VACI BORR ← → Letra Información de contacto Electric Corp. ¿Guardar contenido? Sí VLVR 10 MENÚ DE COMPROBACIÓN Elemento del menú Función de comprobación...
  • Page 57 11 MÉTODO DE FUNCIONAMIENTO 11.1 FUNCIONAMIENTO BÁSICO Sala de reuniones MODO VEL. DEFL. TEMP. Sala de reuniones MODO VEL. DEFL. TEMP. CALOR ALTA FRIO MEDIA VEL. AJST MODO DEFL. AJST 11.2 MODO DE FUNCIONAMIENTO (ENFRIAMIENTO, CALEFACCIÓN, DESHUMIDIFICACIÓN, ENFRIAMIENTO/CALEFACCIÓN AUTOMÁTICOS Y FLUJO DE AIRE) Función Conectando Sala de reuniones...
  • Page 58 12 MÉTODO DE AJUSTE 12.1 AJUSTE DE LA TEMPERATURA N O TA Sala de reuniones MODO VEL. TEMP. FRIO ALTA VEL. AJST Sala de reuniones MODO VEL. TEMP. FRIO ALTA VEL. AJST 12.2 VELOCIDAD DEL VENTILADOR N O TA Sala de reuniones MODO VEL.
  • Page 59 12.3 DIRECCIÓN DEL DEFLECTOR OSCILANTE Sala de reuniones Sala de reuniones MODO VEL. DEFL. TEMP. MODO VEL. DEFL. TEMP. FRIO FRIO MEDIA MEDIA VEL. TEMP. AJST VEL. TEMP. AJST N O TA N O T A 13 FUNCIONAMIENTO 13.1 INICIO DEL FUNCIONAMIENTO N O T A Sala de reuniones MODO...
  • Page 60 13.2 DETENER EL FUNCIONAMIENTO N O TA Sala de reuniones MODO VEL. TEMP. FRIO MEDIA MODO TEMP. AJST 13.3 BLOQUEO DEL FUNCIONAMIENTO Sala de reuniones MODO VEL. TEMP. FRIO ALTA VEL. AJST N O TA Sala de reuniones MODO VEL. TEMP.
  • Page 61 14.2 REINICIALIZAR SEÑAL DE FILTRO N O TA FLTR Restablecer señal filtro ¿Restablecer señal de filtro? Sí VLVR Menú 15:10(Vi) Restablecer señal filtro Rejilla arriba y abajo Función 3 Temporizador Simple Programar temporizador VLVR 14.3 REJILLA ARRIBA Y ABAJO N O TA P R E C A U C I Ó...
  • Page 62 Rejilla arriba y abajo REJ. Todos Rejilla arriba y abajo: Todos REJ. 00-00 01-01 02-02 Pulse para subir/bajar la rejilla VLVR VLVR N O TA Rejilla arriba y abajo: Todos REJ. Pulse para subir/bajar la rejilla VLVR 14.4 FUNCIONAMIENTO DEL TEMPORIZADOR SIMPLE Menú...
  • Page 63 N O TA Sala de reuniones MODO VEL. TEMP. FRIO ALTA VEL. AJST 14.5 FUNCIONAMIENTO PROGRAMADO 14.5.1 Ajuste programa semanal 15:10(Vi) VLVR Menú Restablecer señal filtro Ajuste programa semanal 15:10(Vi) Rejilla arriba y abajo Función 3 Temporizador Simple Programar temporizador VLVR VLVR Programar temporizador...
  • Page 64 Ajus. Temporizador (Lu) 15:10(Vi) ¿Ajustar el temporizador? Programar temporizador 15:10(Vi) Ajuste de día/hora Sí Ajus. otro día Ajuste del día festivo VLVR Programación ACT/DESACT VLVR Sala de reuniones MODO VEL. TEMP. FRIO ALTA VEL. AJST Ajuste del día festivo 15:10(Vi) N O TA Festiv.
  • Page 65 14.5.3 15:10(Vi) Programación ACT/DESACT ¿Activar programación? Menú Restablecer señal filtro Sí Rejilla arriba y abajo Función 3 VLVR Temporizador Simple Programar temporizador VLVR N O TA Programar temporizador 15:10(Vi) Ajuste de día/hora Ajuste del día festivo Programación ACT/DESACT VLVR 14.6 AJUSTE DEL DEFLECTOR INDIVIDUAL 14.6.1 Menú...
  • Page 66 14.6.2 Menú 15:10(Vi) Ajuste del deflector Ajuste del deflector 01-01 Deflector Abierto/Cerrado 01-02 Encendido A/C, ventilación 01-03 Ajuste interc. calor total 01-04 Función 10 Seleccionar la unidad para ajustar. VLVR VLVR N O TA Ajuste del deflector Ajuste del deflector Cancelar AJ.
  • Page 67 14.7 DEFLECTOR ABIERTO/CERRADO Deflector Abierto/Cerrado ¿Abrir deflector? Sí VLVR Menú 15:10(Vi) Ajuste del deflector Deflector Abierto/Cerrado Encendido A/C, ventilación Ajuste interc. calor total N O TA Función 10 VLVR 14.8 VENTILACIÓN Función Encendido A/C, ventilación U. selec. A/C + VENTI N O TA AJUS VLVR...
  • Page 68 14.9 AJUSTE DEL INTERCAMBIADOR DE CALOR TOTAL Ajuste interc. calor total Modo Venti Venti. KPI N O TA AJST VLVR Menú 15:10(Vi) Ajuste del deflector Deflector Abierto/Cerrado Ajuste interc. calor total Encendido A/C, ventilación Ajuste interc. calor total ¿Fijar el ajuste del Función 10 intercambiador de calor total? VLVR...
  • Page 69 14.11 AJUSTE DE IDIOMA Ajuste de idioma Menú English Configurando día/hora Français Ajustes de la pantalla Deutsch Función 13 Italiano Nombre de la habitación Español Función 15 VLVR VLVR Ajuste de idioma Ajustes de la pantalla Ajuste de Pantalla ¿Inicializar nombre de la Ajuste de idioma habitación e información de Unidad de temperatura...
  • Page 70 14.13 AJUSTE DE VISUALIZACIÓN DE LA PANTALLA 14.13.1 Función Menú 15:10(Vi) Configurando día/hora Ajustes de la pantalla Función 13 Nombre de la habitación Ajuste de Pantalla Función 15 Formato h 24 h (11:04) VLVR Brillo luz Luz apagada 15 Segundos Contraste Brillo LE AJST...
  • Page 71 14.14 REGISTRO DEL NOMBRE DE LA HABITACIÓN Nombre de la habitación Sala de reuniones ‘ € Sim.1 Sim.2 < > ñ VACI BORR ← → Letra Menú Configurando día/hora Ajustes de la pantalla Función 13 Nombre de la habitación Función 15 VLVR Nombre de la habitación Sala de reuniones...
  • Page 72 15.2 INDICADORES DE LA LCD Acerca de la Indicación : Funcionamiento del aire acondicionado Venti. : Funcionamiento de la ventilación REJ. : La rejilla no está situada correctamente. : El modo de funcionamiento está bloqueado. Ftro : Limpie el filtro del aire. Página siguiente VLVR Menú...
  • Page 73 15.4 RESOLUCIÓN DE PROBLEMAS Resolución de problemas Lo siguiente no indica mala función La unidad no funciona. Condiciones: En la pantalla del mando a distancia se muestra CALEN. Causa: El control del calentamiento del compresor se activa para extender la vida útil del producto.
  • Page 74 16 OTRAS INDICACIONES 16.1 EN CONDIONES NORMALES 16.1.1 Control central 16.1.4 Control del funcionamiento Sala de reuniones MODO VEL. DEFL. TEMP. Sala de reuniones MODO VEL. TEMP. CALOR MEDIA CALOR MEDIA Control central CALEN. DEFL. AJST Encendido Encendido 16.1.2 Controlador térmico Sala de reuniones MODO VEL.
  • Page 75 16.2 EN CONDICIONES ANÓMALAS 16.2.1 Anomalía 16.2.3 Ruido eléctrico 16.2.2 Fallo de alimentación...
  • Page 77 1 SICHERHEITSÜBERSICHT G E FA H R H I N W E I S V O R S I C H T In Umgebungen mit Ölnebel oder verdunstendem Öl. gebung). An Orten, an denen entzündbare Gase vorhanden gen). In Meeresnähe (salzige Umgebung). 2 INSTALLATION 2.1 WAHL DES INSTALLATIONSORTS...
  • Page 78 2.2 VOR DER INSTALLATION Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 PLATZBEDARF > 50mm 2.4 INSTALLATIONSSCHRITTE Draw-out Hole Groove fo...
  • Page 79 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 KABELANSCHLUSS H I N W E I S REMOCON REMOCON REMOCON REMOCON V O R S I C H T 50mm 100mm...
  • Page 80 4 SCHALTERNAMEN UND -FUNKTIONEN Anzeigebereich Zeitplan-Wochentimer einstellen Raumbezeichnungs- Lüfterdrehzahlanzeige anzeige Anzeige Betriebssperre-Anzeige Betriebsarten anzeige Filt. Filterzeichen-Anzeige Betriebsanleitungs modusanzeige Sitzungssaal Klima Filt. MODUS STUFE LOUV TEMP WAHL KÜHLEN Betriebsanzeige Anzeige der Temperatureinstellung LOUV Änd. Menü-Taste Taste START/STOPP Hilfe-Taste Pfeiltaste Eingabe-Taste Bedienungsteil H I N W E I S...
  • Page 81 5 PRÜFVERFAHREN Testlauf-Einst. : 5 IT MODUS KÜHLEN STUFE Wahl Änd. START < H I N W E I S...
  • Page 82 6 FUNKTION AUSWAHL UND EINSTELLUNG Menü Testlauf Testlauf Funktionsauswahl Temp.fühler-Auswahl Eingang/Ausgang Funktion 5 Wahl Best < Funktionsauswahl Alle 01-01 01-02 01-03 01-04 Wahl Best < Funktionsauswahl: 01-03 Eingang/Ausgang: 01-03 Teil Anpassen Teil Anpassen Anschluss Eing. 1 CN3 1-2 Eing. 2 CN3 2-3 Ausg.
  • Page 83 Einzelne Einstellungsbe- Elem. Inhalt Einstellung dingungen × × × × × × × × ×...
  • Page 84 Einzelne Einstellungsbe- Elem. Inhalt Einstellung dingungen × × ×...
  • Page 85 Einzelne Einstellungsbe- Elem. Inhalt Einstellung dingungen × × × × × × × × × × × × × × ×...
  • Page 86 Einzelne Einstellungsbe- Elem. Inhalt Einstellung dingungen × × × × × H I N W E I S...
  • Page 87 Eingangsnummern-Anzeige Anschluss Anzeige Eingang/Ausgang Einstellung Anzeige Anzeige Eingang Ausgang H I N W E I S...
  • Page 88 7 LUFTGITTER HOCH/RUNTER EINSTELLEN/ ABBRECHEN Eingang/Ausgang: 01-03 Teil Anpassen Anschluss Eingang/Ausgang: 01-03 Eing. 1 CN3 1-2 Teil Anpassen Anschluss Eing. 1 CN3 1-2 Eing. 2 CN3 2-3 Eing. 2 CN3 2-3 Ausg. 1 CN7 1-2 Ausg. 1 CN7 1-2 Ausg. 2 CN7 1-3 Ausg.
  • Page 89 8 LUFTLAMMENEINSTELLUNG MENÜ 15:10(Fr) Luftlammeneinstellung Lamelle bewegen Klima/Lüften aus Einstellung KPI Funktion 10 Wahl Best < Luftlammeneinstellung Luftlammeneinstellung Storno Einst. Änd. Best < Luftlammeneinstellung 01-01 01-02 01-03 01-04 Auswahl des einzustellenden Gerätes. Wahl < Best Luftlammeneinstellung: 01-03 Einstellung der Luftrichtung/Winkel Wahl Änd.
  • Page 90 9 KONTAKTINFORMATION REGISTRIERUNG Kontaktinformation 1 < > € ö ü Sym.1 Sym.2 ä ß Leer DEL ← → STOP Wahl Schr.art Best STOP Kontaktinformation Electric Corp. Diese Inhalte speichern? Nein Wahl Best < 10 PRÜFMENÜ Prüfmenü- Element...
  • Page 91 11 BEDIENVERFAHREN 11.1 BASISBETRIEB Tagungsraum Klima Tagungsraum Klima MODUS STUFE LOUV TEMP WAHL MODUS STUFE LOUV TEMP WAHL HEIZEN KÜHLEN STUFE Änd. MODUS LOUV Änd. 11.2 BETRIEBSMODUS (KÜHLEN, HEIZEN, TROCKNEN, KÜHL-/HEIZ-AUTOMATIK UND LUFTSTROM-BETRIEB) Verbindung Klima Meeting Room MODUS STUFE TEMP WAHL KÜHLEN STUFE Änd.
  • Page 92 12 EINSTELLVERFAHREN 12.1 TEMPERATUREINSTELLUNG H I N W E I S Klima Tagungsraum MODUS STUFE TEMP WAHL KÜHLEN STUFE Tagungsraum Klima MODUS STUFE TEMP WAHL KÜHLEN STUFE Änd. 12.2 LÜFTERDREHZAHL H I N W E I S Klima Tagungsraum MODUS STUFE TEMP WAHL KÜHLEN...
  • Page 93 12.3 SCHWINGLUFTLAMELLEN-RICHTUNG Tagungsraum Klima MODUS STUFE LOUV TEMP WAHL Klima Tagungsraum MODUS STUFE LOUV TEMP WAHL KÜHLEN KÜHLEN STUFE TEMP WAHL Änd. STUFE TEMP WAHL Änd. H I N W E I S H I N W E I S 13 BETRIEB 13.1 BETRIEB STARTEN H I N W E I S...
  • Page 94 13.2 BETRIEB WIRD GESTOPPT. H I N W E I S Tagungsraum Klima MODUS STUFE TEMP WAHL KÜHLEN MODUS TEMP WAHL Änd. 13.3 BETRIEBSBLOCKIERUNG Tagungsraum Klima MODUS STUFE TEMP WAHL KÜLHEN STUFE Änd. H I N W E I S Tagungsraum Klima MODUS STUFE...
  • Page 95 14.2 FILTER ZURÜCKSETZTEN H I N W E I S Filt. Filter zurücksetzten Filter zurückgesetzt? Nein Wahl Best < MENÜ 15:10(Fr) Filter zurücksetzten Luftgitter hoch/runter Funktion 3 Einfacher Timer Wochentimer einstellen Wahl Best < 14.3 LUFTGITTER HOCH/RUNTER H I N W E I S V O R S I C H T MENÜ...
  • Page 96 Luftgitter hoch/runter AUAB Alle Luftgitter hoch/runter:Alle AUAB 00-00 01-01 02-02 Drücken Sie die Tasten , um den Gitter nach oben/nach unten zu fahren Wahl Best < < H I N W E I S Luftgitter hoch/runter:Alle AUAB Drücken Sie die Tasten , um den Gitter nach oben/nach unten zu fahren...
  • Page 97 H I N W E I S Klima Tagungsraum MODUS STUFE TEMP WAHL KÜHLEN STUFE Änd. 14.5 ZEITPLAN-BETRIEB Beispiel: 14.5.1 Zeitplan-Einstellung Wochenprogramm einst. 15:10(Fr) MENÜ 15:10(Fr) Wahl Best < Filter zurücksetzten Luftgitter hoch/runter Wochenprogramm einst. 15:10(Fr) Funktion 3 Einfacher Timer Wochentimer einstellen Wahl Best...
  • Page 98 Timer Einstellung (Mo) 15:10(Fr) Timer eingestellt? Wochentimer einstellen 15:10(Fr) Datum/Zeit einstellen Feiertagseinstellung Tag wählen Nein Wochentimer EIN/AUS Wahl Best < Wahl Best < Tagungsraum Klima MODUS STUFE TEMP WAHL KÜHLEN Feiertagseinstellung 15:10(Fr) STUFE Änd. Wahl Urlaub ON/OFF Best < H I N W E I S Feiertagseinstellung 15:10(Fr) Urlaubsseinstellung...
  • Page 99 14.5.3 Einstellung von Wochentimer EIN/AUS Wochentimer EIN/AUS 15:10(Fr) Zeitplan aktivieren? 15:10(Fr) MENÜ Filter zurücksetzten Luftgitter hoch/runter Nein Funktion 3 Einfacher Timer Wahl Best < Wochentimer einstellen Wahl Best < H I N W E I S Wochentimer einstellen 15:10(Fr) Datum/Zeit einstellen Feiertagseinstellung Wochentimer EIN/AUS Wahl...
  • Page 100 14.6.2 Abbruch der Luftlammeneinstellung. Luftlammeneinstellung 01-01 01-02 MENÜ 15:10(Fr) 01-03 Luftlammeneinstellung Lamelle bewegen 01-04 Klima/Lüften aus Auswahl des einzustellenden Gerätes. Einstellung KPI Wahl Best < Funktion 10 Wahl Best < H I N W E I S Luftlammeneinstellung Luftlammeneinstellung Storno Einst. Luftlammeneinstellung: 01-03 Wahl Best...
  • Page 101 14.7 LAMELLE BEWEGEN Lamelle bewegen Lamelle öffnen? Nein MENÜ 15:10(Fr) Wahl Best < Luftlammeneinstellung Lamelle bewegen Klima/Lüften aus Einstellung KPI Funktion 10 H I N W E I S Wahl Best < 14.8 BELÜFTUNG Klima/Lüften aus Gerätewahl Klima+Lüften H I N W E I S Änd.
  • Page 102 14.9 EINSTELLUNG DES GESAMTWÄRMETAUSCHERS Einstellung KPI Belüften Lüften+KPI H I N W E I S Änd. Best < MENÜ 15:10(Fr) Luftlammeneinstellung Lamelle bewegen Einstellung KPI Klima/Lüften aus Einstellung KPI Einstellung ok? Funktion 10 Wahl Best < Nein Wahl Best < 14.10 DATUM UND UHRZEIT EINSTELLEN Datum und Uhrzeit einstellen MM TT...
  • Page 103 14.11 SPRACHENEINSTELLUNG Spracheinstellung MENÜ English Datum und Uhrzeit einstellen Français Bildschirmeinstellung Deutsch Funktion 13 Italiano Raumbez. Español Funktion 15 Wahl Best < Wahl Best < Spracheinstellung Bildschirmeinstellung Bildeinstellung Initialisieren Sie raumbez. Spracheinstellung und Kontaktinformationen zum Temperatureinstellung Wechseln der Sprache? Nein Wahl Best <...
  • Page 104 14.13 BILDEINSTELLUNG 14.13.1 Bildeinstellung MENÜ 15:10(Fr) Datum und Uhrzeit einstellen Bildschirmeinstellung Funktion 13 Raumbez. Funktion 15 Bildeinstellung Wahl Best < Zeitformat 24 Std (11:04) Beleucht. Beleucht aus 15 Sek Kontrast Hell. LED Bildschirmeinstellung Wahl Änd. Best < Bildeinstellung Spracheinstellung Temperatureinstellung Wahl Best <...
  • Page 105 14.14 REGISTRIERUNG DER RAUMBEZEICHNUNG Raumbez. Tagungsrau < > € ö ü Sym.1 Sym.2 ä ß Leer DEL ← → STOP Wahl Schr.art Best STOP MENÜ Datum und Uhrzeit einstellen Bildschirmeinstellung Funktion 13 Raumbez. Funktion 15 Wahl Best < Raumbez. Tagungsraum <...
  • Page 106 15.2 ANZEIGEN AN DER LCD Zeichenerklärung Klima : Klimatisierungsbetrieb. Lüften : Belüftungsbetrieb. : Das Gitter wurde nicht korrekt AUAB positioniert. : Betriebsart ist blockiert. Filt. : Luftfilter säubern. Hilfe Nächste Seite < Zeichenerklärung Über den Betrieb Fehlerbehebung Kontaktinformation Wahl Best <...
  • Page 107 15.4 FEHLERBEHEBUNG Fehlerbehebung Folgender Betrieb bringt keine Störung Gerät funktioniert nicht. Voraussetzung: wird am Display WARMST der Fernbedienung angezeigt. Ursache: Die Kurbelwannenheizung ist aktiviert, um die Lebensdauer des Produkts zu verlängern Nächste Seite < Hilfe Zeichenerklärung Über den Betrieb Fehlerbehebung Kontaktinformation Fehlerbehebung Gerät funktioniert nicht.
  • Page 108 16 ANDERE ANZEIGEN 16.1 IN NORMALZUSTAND 16.1.1 Zentralsteuerungen 16.1.4 Betriebssteuerung Tagungsraum Klima MODUS STUFE LOUV TEMP WAHL Klima Tagungsraum HEIZEN MODUS STUFE TEMP WAHL HEIZEN Zentralsteuerungen Eingeschaltet WARMST LOUV Änd. 16.1.2 Thermosteuerung Eingeschaltet Klima Tagungsraum MODUS STUFE LOUV TEMP WAHL 16.1.3 Entfrosten HEIZEN WARMST...
  • Page 109 16.2 IN DER FEHLERBEDINGUNGEN 16.2.1 Fehler 16.2.3 16.2.2 Stromausfall...
  • Page 111 1 SOMMAIRE DES DISPOSITIFS DE SÉCURITÉ R E M A R Q U E D A N G E R AT T E N T I O N À proximité de vapeur d’huile et de dispersion d’huile. À proximité de sources thermales (environnement soufré).
  • Page 112 2.2 AVANT L'INSTALLATION Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 ESPACE D'INSTALLATION > 50mm 2.4 PROCÉDURE D’INSTALLATION Draw-out Hole Groove for...
  • Page 113 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 CÂBLAGE ÉLECTRIQUE R E M A R Q U E REMOCON REMOCON REMOCON REMOCON AT T E N T I O N 50mm 100mm...
  • Page 114 4 NOMS ET FONCTIONS DES TOUCHES Pièce écran Indicateur programmateur hebdo Indicateur de la vitesse Indicateur du Indicateur nom de de ventilation la zone controlée Indicateur verrouillage de Indicateur du mode fonctionnement de fonctionnement Filt Indicateur de guide de fonctionnement Salle de réunion CLIMA Filt...
  • Page 115 5 PROCÉDURE DE VÉRIFICATION Nb unité en test : 05 unités MODO OP: FROID VENT REGL MARCHE R E M A R Q U E...
  • Page 116 6 SÉLECTION DES FONCTIONS ET RÉGLAGE Menu test de fonctionnement Test de fonctionnement Sélection des fonctions Sélection de la Sonde Entrée / Sortie Fonction 5 Sélection des fonctions Toutes 01-01 01-02 01-03 01-04 Sélection des fonctions: 01-03 Entrée / Sortie: 01-03 Élément Réglage Élément...
  • Page 117 Réglage Condition de Élém. Fonction optionnelle Contenus individuel réglage × × × × × × × × ×...
  • Page 118 Réglage Condition de Élém. Fonction optionnelle Contenus individuel réglage ×...
  • Page 119 Réglage Condition de Élém. Fonction optionnelle Contenus individuel réglage × × × × × × × × × × × × ×...
  • Page 120 Réglage Condition de Élém. Fonction optionnelle Contenus individuel réglage × × × × × × × × × R E M A R Q U E...
  • Page 121 Réglage d'usine Port Indication Entrée / Sortie Élément de réglage Indication Indication Entrée Sortie R E M A R Q U E...
  • Page 122 7 RÉGLAGE/ANNULATION DE LA GRILLE HAUT/BAS Entrée / Sortie: 01-03 Entrée / Sortie: 01-03 Élément Réglage Connecteur Élément Réglage Connecteur Entrée 1 CN3 1-2 Entrée 1 CN3 1-2 Entrée 2 CN3 2-3 Entrée 2 CN3 2-3 Sortie1 CN7 1-2 Sortie1 CN7 1-2 Sortie2 CN7 1-3...
  • Page 123 8 RÉGLAGE INDIVIDUEL VOLET Menu 15:10(Ven) Réglage individuel volet Ouvrir / Fermer Volet ? Commutateur CLIM / VENTIL Réglage Double Flux Fonction 10 Réglage individuel volet Réglage individuel volet ANNULATION des réglages Réglage individuel volet 01-01 01-02 01-03 01-04 Sélectionner l’unité à configurer. Réglage individuel volet: 01-03 Régler l'angle des volets.
  • Page 124 9 ENREGISTREMENT DE L’INFORMATION DE CONTACT Information de contact 1 ç é è Sim.1 Sim.2 € à ê ESP SUP ← → Chg ABC Information de contact Electric Corp. Enregistrer ces contenus ? 10 MENU MODE DE VÉRIFICATION Élément du Menu Mode Fonction...
  • Page 125 11 MÉTHODE DE FONCTIONNEMENT 11.1 FONCTIONNEMENT DE BASE CLIMA Salle de réunion MODE VENT VOLET. TEMP Salle de réunion CLIMA MODE VENT VOLET TEMP CHAUD GRAND FROID VENT REGL MODE VOLET REGL 11.2 MODE DE FONCTIONNEMENT (REFROIDISSEMENT, CHAUFFAGE, DÉSHUMIDIFICATION, FONCTIONNEMENT AUTOMATIQUE EN MODE REFROIDISSEMENT/CHAUFFAGE ET DÉBIT D’AIR) Fonction En cours de connexion...
  • Page 126 12 MÉTHODE DE RÉGLAGE 12.1 RÉGLAGE DE LA TEMPÉRATURE R E M A R Q U E CLIMA Salle de réunion MODE VENT TEMP FROID GRAND VENT REGL Salle de réunion CLIMA MODE VENT TEMP FROID GRAND VENT REGL 12.2 VITESSE DE VENTILATION R E M A R Q U E CLIMA Salle de réunion...
  • Page 127 12.3 DIRECTION DU DÉFLECTEUR CLIMA Salle de réunion CLIMA Salle de réunion MODE VENT VOLET TEMP MODE VENT VOLET. TEMP FROID FROID VENT TEMP REGL VENT TEMP REGL R E M A R Q U E R E M A R Q U E 13 FONCTIONNEMENT 13.1 DÉMARRAGE DU FONCTIONNEMENT R E M A R Q U E...
  • Page 128 13.2 ARRÊT DU FONCTIONNEMENT R E M A R Q U E Salle de réunion CLIMA MODE VENT TEMP FROID MODE TEMP REGL 13.3 VERROUILLAGE DU FONCTIONNEMENT Salle de réunion CLIMA MODE VENT TEMP FROID GRAND VENT REGL R E M A R Q U E Salle de réunion CLIMA MODE VENT...
  • Page 129 14.2 RÉINIT FILTRAGE R E M A R Q U E Filt Réinit Filtrage Réinitialiser le filtrage ? Menu 15:10(Ven) Réinit Filtrage Grille haut/bas Fonction 3 Programmateur simple Programmateur hebdo 14.3 GRILLE HAUT/BAS R E M A R Q U E AT T E N T I O N Menu 15:10(Ven)
  • Page 130 Grille haut/bas Toutes 00-00 01-01 Grille haut/bas: Toutes 02-02 Appuyer sur pour monter / descendre la grille R E M A R Q U E Grille haut/bas: Toutes Appuyer sur pour monter / descendre la grille 14.4 FONCTIONNEMENT DU PROGRAMMATEUR SIMPLE Menu 15:10(Ven) Réinit Filtrage...
  • Page 131 R E M A R Q U E Salle de réunion CLIMA MODE VENT TEMP FROID GRAND VENT REGL 14.5 FONCTIONNEMENT PROGRAMMÉ Exemple : 14.5.1 Réglage du programme Conf Prog Hebdo 15:10(Ven) Menu 15:10(Ven) Réinit Filtrage Conf Prog Hebdo 15:10(Ven) Grille haut/bas Fonction 3 Programmateur simple...
  • Page 132 Programmation (Lun) 15:10(Ven) Enregistrer la programmation ? Programmateur hebdo 15:10(Ven) Paramétrage date/heure Jours Fériés Jour suivant ACTIVATION ? Salle de réunion CLIMA MODE VENT TEMP FROID GRAND Jours Fériés 15:10(Ven) VENT REGL Sélection R E M A R Q U E Jours Fériés 15:10(Ven) Sauvegarder les jours fériés ?
  • Page 133 14.5.3 Réglage du ACTIVATION ? 15:10(Ven) ACTIVATION ? Activer le programme? Menu 15:10(Ven) Réinit Filtrage Grille haut/bas Fonction 3 Programmateur simple Programmateur hebdo R E M A R Q U E Programmateur hebdo 15:10(Ven) Paramétrage date/heure Jours Fériés ACTIVATION ? 14.6 RÉGLAGE INDIVIDUEL VOLET 14.6.1 Réglage Menu...
  • Page 134 14.6.2 Annulation du réglage individuel volet Réglage individuel volet 01-01 Menu 15:10(Ven) Réglage individuel volet 01-02 Ouvrir / Fermer Volet ? 01-03 Commutateur CLIM / VENTIL 01-04 Réglage Double Flux Sélectionner l’unité à configurer. Fonction 10 R E M A R Q U E Réglage individuel volet Réglage individuel volet ANNULATION des réglages...
  • Page 135 14.7 OUVRIR / FERMER VOLET Ouvrir / Fermer Volet ? Ouvrir le volet ? Menu 15:10(Ven) Réglage individuel volet Ouvrir / Fermer Volet ? Commutateur CLIM / VENTIL Réglage Double Flux Fonction 10 Sél R E M A R Q U E 14.8 VENTILATION Fonction Commutateur CLIM / VENTIL...
  • Page 136 14.9 RÉGLAGE DE L’ÉCHANGEUR THERMIQUE TOTAL Réglage Double Flux Mode VENTI Venti D-Flux R E M A R Q U E REGL Menu 15:10(Ven) Réglage individuel volet Ouvrir / Fermer Volet ? Commutateur CLIM / VENTIL Réglage Double Flux Réglage Double Flux Fonction 10 Sauvegarder la configuration de l’échangeur double flux ?
  • Page 137 14.11 RÉGLAGE DE LA LANGUE Réglage de la langue English Français Réglage date / heure Deutsch Configuration de l’écran Italiano Fonction 13 Español Nom de la zone controlée Fonction 15 Réglage de la langue Configuration de l’écran Initialiser le nom de la pièce Réglage de l’écran et les informations de contact Réglage de la langue...
  • Page 138 14.13 CONFIGURATION DE L’ÉCRAN 14.13.1 Réglage de l'écran Fonction Réglage date / heure Configuration de l’écran Fonction 13 Réglage de l’écran Nom de la zone controlée Heure12-24 24H (11:04) Fonction 15 luminosité Arrêt Rétro 15 Secondes Contraste Voyant M/A REGL Configuration de l’écran Réglage de l’écran Réglage de la langue...
  • Page 139 14.14 ENREGISTREMENT DU NOM DE LA ZONE CONTROLÉE Nom de la zone controlée Salle de réunio ç é è Sim.1 Sim.2 € à ê ESP SUP ← → Chg ABC Réglage date / heure Configuration de l’écran Fonction 13 Nom de la zone controlée Fonction 15 Nom de la zone controlée Salle de réunion...
  • Page 140 15.2 INDICATEURS SUR LE LCD À propos des icônes : Fonctionnement de la climatisation. CLIMA Venti : Fonctionnement de la ventilation. : La grille n’a pas été positionnée correctement. : Le mode de fonctionnement est verrouillé. Filt : Nettoyer le filtre à air. Page suivante Menu d’aide À...
  • Page 141 15.4 DÉPANNAGE Dépannage Pas de dysfonctionnement L’unité ne fonctionne pas. Conditions: est affiché sur l’écran DM-HOT de la télécommande. Cause: La commande de chauffage du compresseur est activée afin d’allonger la durée de vie du produit. Page suivante Menu d’aide À...
  • Page 142 16 AUTRES INDICATIONS 16.1 DANS DES CONDITIONS NORMALES 16.1.1 Commande centrale 16.1.4 Commande du fonctionnement Salle de réunion CLIMA MODE VENT VOLET TEMP CLIMA Salle de réunion CHAUD MODE VENT TEMP CHAUD Commande centrale Allumé DM-HOT VOLET REGL 16.1.2 Thermo-contrôleur Allumé...
  • Page 143 16.2 DANS DES CONDITIONS ANORMALES 16.2.1 Anomalie 16.2.3 Bruits électriques 16.2.2 Coupure de courant...
  • Page 145 1 PRECAUZIONI PER LA SICUREZZA N O TA P E R I C O L O AV V E R T E N Z A In aree in cui si rileva dispersione di olio e di vapori di olio. In prossimità di sorgenti di calore (in un ambiente sul- fureo).
  • Page 146 2.2 PRIMA DELL'INSTALLAZIONE Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 SPAZIO D’INSTALLAZIONE > 50mm 2.4 PROCEDURE DI INSTALLAZIONE Draw-out Hole Groove fo...
  • Page 147 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 COLLEGAMENTO DELLO SCHEMA ELETTRICO N O TA REMOCON REMOCON REMOCON REMOCON AV V E R T E N Z A 50mm 100mm...
  • Page 148 4 NOMI E FUNZIONI DEI TASTI Indicatore programmazione timer Indicatore del Indicatore Indicatore di velocità della ventola nome zona orientabile Indicatore blocco del Indicatore modalità di funzionamento funzionamento FLTR Indicatore guida di funzionamento Sala di reunione COOL FLTR MODO OP SPEED DEFL SET TEMP FREDDO Indicatore Run...
  • Page 149 5 PROCEDURA DI CONTROLLO Test Run di : 5 Unità MODO OP: FREDDO SPEED MEDIA BACK N O TA...
  • Page 150 6 SELEZIONE E IMPOSTAZIONE FUNZIONE Menu prova di funzionamento Prova di funzionamento Selezione funzione Selezione termistore IN / OUT Funzione 5 SLCT BACK Selezione funzione Tutti 01-01 01-02 01-03 01-04 SLCT BACK Selezione funzione: 01-03 IN / OUT: 01-03 Item Setting Item Setting...
  • Page 151 Impostazione Condizioni di Item Funzione opzionale Contenuti individuale impostazione × × × × × × × × ×...
  • Page 152 Impostazione Condizioni di Item Funzione opzionale Contenuti individuale impostazione ×...
  • Page 153 Impostazione Condizioni di Item Funzione opzionale Contenuti individuale impostazione × × × × × × × × × × × × ×...
  • Page 154 Impostazione Condizioni di Item Funzione opzionale Contenuti individuale impostazione × × × × × × × × × N O TA...
  • Page 155 Impostazione di fabbrica Porta Indicazione IN / OUT Impostazione item Indicazione Indicazione Input Output N O TA...
  • Page 156 7 IMPOSTAZIONE/ANNULLAMENTO SOLLEVAMENTO GRIGLIA IN / OUT: 01-03 IN / OUT: 01-03 Item Setting Connettore Item Setting Connettore IN 1 CN3 1-2 IN 1 CN3 1-2 IN 2 CN3 2-3 IN 2 CN3 2-3 OUT1 CN7 1-2 OUT1 CN7 1-2 OUT2 CN7 1-3 OUT2...
  • Page 157 8 IMPOSTAZIONE DEFLETTORE Menu 15:10(Ven) Impostazione Deflettore Deflettore aperto/chiuso VENTI Total Heat Exchanger SET Funzione 10 SLCT BACK Impostazione Deflettore Impostazione Deflettore DEL SET Deflettore INDV SLCT BACK Impostazione Deflettore 01-01 01-02 01-03 01-04 Selezionare l'unità da impostare. SLCT BACK Impostazione Deflettore: 01-03 Direzione e inclinazione Deflettore.
  • Page 158 9 REGISTRAZIONE INFORMAZIONI DI CONTATTO Informazioni di contatto 1 à ‘ Sym.1 Sym.2 ò è ì ù BLK DEL ← → SLCT Tipo Font Informazioni di contatto Electric Corp. Registrare questi contenuti? Sì SLCT BACK 10 MENU DI CONTROLLO Item menu di Funzione controllo...
  • Page 159 11 METODO DI FUNZIONAMENTO 11.1 FUNZIONAMENTO DI BASE COOL Sala di reunione Sala di reunione COOL MODO OP SPEED DEFL SET TEMP MODO OP SPEED DEFL SET TEMP CALDO FREDDO ALTA MEDIA SPEED MODO OP DEFL 11.2 MODALITÀ DI FUNZIONAMENTO (RAFFREDDAMENTO, RISCALDAMENTO, DEUMIDIFICAZIONE, RAFFREDDAMENTO/RISCALDAMENTO AUTO E FLUSSO D'ARIA) Funzione Connessione in corso...
  • Page 160 12 METODO DI IMPOSTAZIONE 12.1 IMPOSTAZIONE TEMPERATURA N O TA COOL Sala di reunione MODO OP SPEED SET TEMP FREDDO ALTA SPEED Sala di reunione COOL MODO OP SPEED SET TEMP FREDDO ALTA SPEED 12.2 VELOCITÀ DELLA VENTOLA N O TA COOL Sala di reunione MODO OP...
  • Page 161 12.3 DIREZIONE DEFLETTORE ORIENTABILE Sala di reunione COOL Sala di reunione COOL MODO OP SPEED DEFL SET TEMP MODO OP SPEED DEFL SET TEMP FREDDO FREDDO MEDIA MEDIA SPEED SET TEMP SPEED SET TEMP N O TA N O TA 13 FUNZIONAMENTO 13.1 AVVIO FUNZIONAMENTO N O TA...
  • Page 162 13.2 ARRESTO FUNZIONAMENTO N O TA Sala di reunione COOL MODO OP SPEED SET TEMP FREDDO MEDIA MODO OP SET TEMP 13.3 BLOCCO DEL FUNZIONAMENTO Sala di reunione COOL MODO OP SPEED SET TEMP FREDDO ALTA SPEED N O TA Sala di reunione COOL MODO OP SPEED...
  • Page 163 14.2 RIPRISTINARE FILTRO N O TA FLTR Ripristinare filtro Ripristinare filtro? Sì SLCT BACK Menu 15:10(Ven) Ripristinare filtro Sollevamento griglia Funzione 3 Timer semplice Programmazione Timer SLCT BACK 14.3 SOLLEVAMENTO GRIGLIA N O TA AV V E R T E N Z A Menu 15:10(Ven) Ripristinare filtro...
  • Page 164 Sollevamento griglia UPDW Tutti 00-00 Sollevamento griglia:Tutti UPDW 01-01 02-02 Premere alzare/abbassare la griglia. SLCT BACK BACK N O TA Sollevamento griglia:Tutti UPDW Premere alzare/abbassare la griglia. BACK 14.4 FUNZIONAMENTO TIMER SEMPLICE Menu 15:10(Ven) Ripristinare filtro Timer semplice 15:10(Ven) Sollevamento griglia Timer Ope.
  • Page 165 N O TA Sala di reunione COOL MODO OP SPEED SET TEMP FREDDO ALTA SPEED 14.5 FUNZIONAMENTO PROGRAMMATO 14.5.1 Impostazione programma Esempio: Impostazione Timer 15:10(Ven) Menu 15:10(Ven) SLCT BACK Ripristinare filtro Sollevamento griglia Impostazione Timer 15:10(Ven) Funzione 3 Timer semplice Programmazione Timer SLCT BACK...
  • Page 166 Impostazione timer (Lun) 15:10(Ven) Impostare il timer? Programmazione Timer 15:10(Ven) Impostazione giorno/ora Sì Selez. Giorno Impostazione HOLIDAY SLCT BACK Programmazione ON/OFF SLCT BACK Sala di reunione COOL MODO OP SPEED SET TEMP FREDDO ALTA SPEED Impostazione HOLIDAY 15:10(Ven) N O TA SLCT HOLID ON/OFF BACK...
  • Page 167 14.5.3 Impostazione programmazione ON/OFF 15:10(Ven) Programmazione ON/OFF Attivare programmazione ON? Menu 15:10(Ven) Ripristinare filtro Sì Sollevamento griglia Funzione 3 SLCT BACK Timer semplice Programmazione Timer SLCT BACK N O TA Programmazione Timer 15:10(Ven) Impostazione giorno/ora Impostazione HOLIDAY Programmazione ON/OFF SLCT BACK 14.6 IMPOSTAZIONE DEFLETTORE INDIVIDUALE 14.6.1 Impostazione...
  • Page 168 14.6.2 Impostazione Deflettore 01-01 01-02 Menu 15:10(Ven) 01-03 Impostazione Deflettore Deflettore aperto/chiuso 01-04 VENTI Selezionare l'unità da impostare. Total Heat Exchanger SET SLCT BACK Funzione 10 SLCT BACK N O TA Impostazione Deflettore Impostazione Deflettore DEL SET Deflettore INDV Impostazione Deflettore: 01-03 SLCT BACK N O TA...
  • Page 169 14.7 DEFLETTORE APERTO/CHIUSO LDeflettore aperto/chiuso Aprire Deflettore? Sì Menu 15:10(Ven) SLCT BACK Impostazione Deflettore Deflettore aperto/chiuso VENTI Total Heat Exchanger SET Funzione 10 N O TA SLCT BACK 14.8 VENTILAZIONE Funzione VENTI Select UI Cool.+Vent. N O TA BACK VENTI Menu 15:10(Ven) Impostazione Deflettore...
  • Page 170 14.9 IMPOSTAZIONE DELLO SCAMBIATORE DI CALORE TOTALE Total Heat Exchanger SET VENTI Mode THEX VENTI N O TA BACK Menu 15:10(Ven) Impostazione Deflettore Deflettore aperto/chiuso Total Heat Exchanger SET VENTI Total Heat Exchanger SET Fissare l'impostazione dello Funzione 10 scambiatore di calore totale? SLCT BACK Sì...
  • Page 171 14.11 SETTAGGIO LINGUA Settaggio lingua English Français Impostazione Data/Ora Deutsch Impostazione display Italiano Funzione 13 Español Nome Zona SLCT BACK Funzione 15 BACK Settaggio lingua Impostazione display Adattamento display Inizializzare il nome zona e Settaggio lingua le informazioni di contatto Unità...
  • Page 172 14.13 IMPOSTAZIONE DISPLAY 14.13.1 Funzione Impostazione Data/Ora Impostazione display Funzione 13 Nome Zona Adattamento display Funzione 15 Formato ora H 24 (11:04) BACK Brightness Bright OFF 15 Secondi Contrasto Luminos.ACC SLCT BACK Impostazione display Adattamento display Settaggio lingua Unità di temperatura BACK Adattamento display Fissare impostazione display?
  • Page 173 14.14 REGISTRAZIONE NOME ZONA Name Zona Sala di reunione à ‘ Sym 1 Sym 2 ò è ì ù BLK DEL ← → SLCT Tipo Font Impostazione Data/Ora Impostazione display Funzione 13 Nome Zona Funzione 15 BACK Name Zona Sala di reunione à...
  • Page 174 15.2 INDICATORI DELL'LCD Significato dei simboli : Funzionamento climatizzazione. COOL VENTI : Funzionamento ventilazione. UPDW : Louvre: posizione errata. : La modalità di funzionamento è bloccata. FLTR : Pulire il filtro dell'aria. Pagina successiva BACK Help Menu Significato dei simboli Funzionamento Risoluzione dei problemi Informazioni di contatto...
  • Page 175 15.4 RISOLUZIONE DEI PROBLEMI Risoluzione dei problemi Indicazioni, non malfunzionamento L'unità non funziona. Condizione: appare sul display HOT-ST del dispositivo di interruttore remoto. Causa: Il dispositivo di controllo per riscaldare il compressore di calore è attivato. Pagina successiva BACK Help Menu Significato dei simboli Funzionamento Risoluzione dei problemi...
  • Page 176 16 ALTRE INDICAZIONI 16.1 IN CONDIZIONE NORMALE 16.1.1 Controllo centrale 16.1.4 Controllo del funzionamento Sala di reunione COOL Sala di reunione COOL MODO OP SPEED DEFL SET TEMP MODO OP SPEED SET TEMP CALDO CALDO MEDIA MEDIA HOT-ST Controllo centrale DEFL Acceso Acceso...
  • Page 177 16.2 IN CONDIZIONE ANOMALA 16.2.1 Anomalia 16.2.3 Disturbi elettrici 16.2.2 Interruzione di alimentazione...
  • Page 179 1 RESUMO DA SEGURANÇA N O TA P E R I G O C U I D A D O Onde exista vapor de óleo ou óleo disperso. Num ambiente sulfúrico. Perto do mar (num ambiente salino). Num ambiente ácido ou alcalino. 2 TRABALHO DE INSTALAÇÃO 2.1 SELECÇÃO DO LUGAR DE INSTALAÇÃO...
  • Page 180 2.2 ANTES DA INSTALAÇÃO Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 ESPAÇO DE INSTALAÇÃO > 50mm 2.4 PROCEDIMENTOS DE INSTALAÇÃO Draw-out Hole Groove for...
  • Page 181 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 LIGAÇÕES ELÉCTRICAS N O TA REMOCON REMOCON REMOCON REMOCON C U I D A D O 50mm 100mm...
  • Page 182 4 NOMES E FUNÇÕES DE BOTÕES Zona do visor Indicador do temporizador da programação Indicador da velocida- Indicador de Indicador do de do ventilador nome de divisão Indicador de bloqueio de Indicador do modo de funcionamento funcionamento FLTR Indicador do guia de funcionamento Meeting Room FLTR...
  • Page 183 5 PROCEDIMENTO DE VERIFICAÇÃO RTN. SEL. N O TA...
  • Page 184 6 SELECÇÃO E AJUSTE DA FUNÇÃO Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3...
  • Page 185 Condição de Itens Função opcional Conteúdo individual × × × × × × × × ×...
  • Page 186 Condição de Itens Função opcional Conteúdo individual × ×...
  • Page 187 Condição de Itens Função opcional Conteúdo individual × × × × × × × × × × × × × × ×...
  • Page 188 Condição de Itens Função opcional Conteúdo individual × × × × × × N O TA...
  • Page 189 Apresentação do número de entrada Porta Indicação de entrada / saída Indicação Indicação Entrada Saída N O TA...
  • Page 190 7 AJUSTE/CANCELAMENTO DA GRELHA DE ELEVAÇÃO Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3 CN8 1-2...
  • Page 191 8 AJUSTE DO DEFLECTOR Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL.
  • Page 192 9 REGISTO DA INFORMAÇÃO DE CONTACTO Contact Information 1 Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN. 10 MENU DE VERIFICAÇÃO Item do menu de Função...
  • Page 193 11 MÉTODO DE FUNCIONAMENTO 11.1 FUNCIONAMENTO BÁSICO Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP HEAT HIGH COOL SPEED MODE LOUV. 11.2 MODO DE FUNCIONAMENTO (ARREFECIMENTO, AQUECIMENTO, DESUMIDIFICAÇÃO, ARREFECIMENTO/AQUECIMENTO AUTOMÁTICO E FUNCIONAMENTO COM FLUXO DE AR) Função Connecting Meeting Room...
  • Page 194 12 MÉTODO DE AJUSTE 12.1 AJUSTE DE TEMPERATURA N O TA Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 VELOCIDADE DO VENTILADOR N O TA Meeting Room MODE SPEED TEMP COOL HIGH MODE TEMP...
  • Page 195 12.3 DIRECÇÃO DO DEFLECTOR OSCILANTE Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP N O TA N O TA 13 FUNCIONAMENTO 13.1 PROCEDIMENTO DE ARRANQUE N O TA Meeting Room MODE SPEED LOUV.
  • Page 196 13.2 PARAGEM N O TA Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 BLOQUEIO DE FUNCIONAMENTO Meeting Room MODE SPEED TEMP COOL HIGH SPEED N O TA Meeting Room MODE SPEED TEMP COOL HIGH 14 FUNCIONAMENTO DO MENU 14.1 MENU Menu 15:10(Fri) Filter Sign Reset...
  • Page 197 14.2 REINICIALIZAÇÃO DO SINAL DO FILTRO N O TA FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. 14.3 GRELHA DE ELEVAÇÃO N O TA C U I D A D O Menu 15:10(Fri)
  • Page 198 Elevating Grille UPDW 00-00 01-01 Elevating Grille:All UPDW 02-02 Press to raise/lower grille SEL. ENT. RTN. RTN. N O TA Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 FUNCIONAMENTO DO TEMPORIZADOR SIMPLES Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer 15:10(Fri)
  • Page 199 N O TA Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 FUNCIONAMENTO PROGRAMADO 14.5.1 Exemplo: Weekly Schedule Setting 15:10(Fri) Menu 15:10(Fri) Filter Sign Reset Elevating Grille SEL. ENT. RTN. Function 3 Simple Timer Schedule Timer Weekly Schedule Setting 15:10(Fri) SEL.
  • Page 200 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH SPEED Holiday Setting 15:10(Fri) N O TA SEL. HOL.
  • Page 201 14.5.3 15:10(Fri) Schedule ON/OFF Menu 15:10(Fri) Turn ON schedule function? Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. SEL. ENT. RTN. N O TA Schedule Timer 15:10(Fri) Day/Time Setting Holiday Setting Schedule ON/OFF SEL. ENT.
  • Page 202 14.6.2 Louver Setting Menu 15:10(Fri) 01-01 Louver Setting 01-02 Louver Open/Close 01-03 VENTI 01-04 Total Heat Exchanger SET Select unit to set. Function 10 SEL. ENT. RTN. SEL. ENT. RTN. N O TA Louver Setting Louver Setting Cancel INDV Louver SET Louver Setting:01-03 SEL.
  • Page 203 14.7 ABRIR/FECHAR DEFLECTOR Louver Open/Close Open louver? Menu 15:10(Fri) SEL. ENT. RTN. Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 N O TA SEL. ENT. RTN. 14.8 VENTILAÇÃO Função VENTI SEL'D UNIT A/C + VENTI N O TA ENT.
  • Page 204 14.9 AJUSTE DO PERMUTADOR DE CALOR TOTAL Total Heat Exchanger SET VENTI Mode THEX VENTI N O TA ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Total Heat Exchanger SET Function 10 Fix setting of total heat exchanger? SEL.
  • Page 205 14.11 DEFINIÇÃO DO IDIOMA Language Setting English Français Adjusting Date/Time Deutsch Screen Display Setting Italiano Function 13 Español SEL. ENT. RTN. SEL. ENT. RTN. Language Setting Screen Display Setting Display Adjustment Initialize room name and Language Setting contact info. to switch Temperature Unit language? SEL.
  • Page 206 14.13 AJUSTE DA VISUALIZAÇÃO DO ECRÃ 14.13.1 Função Adjusting Date/Time Function 13 Display Adjustment Time Format 24Hour(11:04) Brightness SEL. ENT. RTN. Back light 15 Seconds Contrast On/Off lamp SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit SEL.
  • Page 207 14.14 REGISTO DO NOME DA DIVISÃO Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Room Name Sym.2...
  • Page 208 15.2 INDICADORES NO LCD About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. : Grille has not been correctly UPDW positioned. : Operation mode is locked. Help Menu FLTR : Clean Air Filter. About Indication Next Page RTN. About Operation Troubleshooting Contact Information SEL.
  • Page 209 15.4 RESOLUÇÃO DE PROBLEMAS Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product.
  • Page 210 16 OUTRAS INDICAÇÕES 16.1 EM CONDIÇÕES NORMAIS 16.1.1 Comando central 16.1.4 Controlo do funcionamento Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED TEMP HEAT HEAT Central Control HOT-ST Turned ON LOUV. Turned ON 16.1.2 Termo-controlador Meeting Room MODE SPEED LOUV.
  • Page 211 16.2 EM CONDIÇÕES ANÓMALAS 16.2.1 Anomalia 16.2.3 Ruído eléctrico 16.2.2 Falha de alimentação...
  • Page 213 1 OVERSIGT OVER SIKKERHED B E M Æ R K ! FA R E F O R S I G T I G 2 MONTERINGSARBEJDE 2.1 VALG AF MONTERINGSSTED...
  • Page 214 2.2 FØR MONTERING Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 MONTERINGSAFSTAND > 50mm 2.4 MONTERINGSPROCEDURER Draw-out Hole Groove for...
  • Page 215 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 ELEKTRISK LEDNINGSFØRING B E M Æ R K ! REMOCON REMOCON REMOCON REMOCON F O R S I G T I G 50mm 100mm...
  • Page 216 4 KNAPPERNES BETEGNELSER OG FUNKTIONER Vis del hastighed FLTR Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH Indstillingstemperatur LOUV. Piltast Tasten Enter Driftsdel B E M Æ R K !
  • Page 217 5 KONTROLPROCEDURE SEL. RTN. B E M Æ R K !
  • Page 218 6 FUNKTIONSVALG OG INDSTILLING Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3 Output1...
  • Page 219 Individuel Betingelse Elem. Indhold indstilling for indstilling × × × × × × × × ×...
  • Page 220 Individuel Betingelse Elem. Indhold indstilling for indstilling × × ×...
  • Page 221 Individuel Betingelse Elem. Indhold indstilling for indstilling × × × × × × × × × × × × × × ×...
  • Page 222 Individuel Betingelse Elem. Indhold indstilling for indstilling × × × × × B E M Æ R K !
  • Page 223 Port Visning Visning Input Udgang B E M Æ R K !
  • Page 224 7 HÆVERIST INDSTILLING/ANNULLERING Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3 CN8 1-2 Output3 CN8 1-2...
  • Page 225 8 INDSTILLING AF SPJÆLD Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL.
  • Page 226 9 REGISTRERING AF KONTAKTINFORMATION Contact Information 1 Sym.1 € Sym.2 < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN. 10 KONTROLMENU Kontrolmenu...
  • Page 227 11 DRIFTSMETODE 11.1 GRUNDLÆGGENDE DRIFT Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP HEAT HIGH COOL SPEED MODE LOUV. 11.2 DRIFTSTILSTAND (AFKØLING, OPVARMNING, BEFUGTNING, AUTOMATISK AFKØLING/ OPVARMNING OG LUFTSTRØM) Connecting Meeting Room MODE SPEED TEMP COOL HIGH SPEED B E M Æ...
  • Page 228 12 INDSTILLINGSMETODE 12.1 INDSTILLING AF TEMPERATUR B E M Æ R K ! Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 VENTILATORHASTIGHED B E M Æ R K ! Meeting Room MODE SPEED TEMP...
  • Page 229 12.3 SPJÆLDFUNKTION RETNING Meeting Room Meeting Room MODE SPEED LOUV. TEMP MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP B E M Æ R K ! B E M Æ R K ! 13 DRIFT 13.1 START DRIFT B E M Æ...
  • Page 230 13.2 STOP DRIFT B E M Æ R K ! Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 LÅSE DRIFT Meeting Room MODE SPEED TEMP COOL HIGH SPEED B E M Æ R K ! Meeting Room MODE SPEED TEMP COOL HIGH...
  • Page 231 14.2 FILTERSYMBOL NULSTILLING B E M Æ R K ! FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. 14.3 HÆVERIST B E M Æ R K ! F O R S I G T I G Menu 15:10(Fri)
  • Page 232 Elevating Grille UPDW Elevating Grille:All UPDW 00-00 01-01 02-02 Press to raise/lower grille SEL. ENT. RTN. RTN. B E M Æ R K ! Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 ENKEL BETJENING AF TIMER Menu 15:10(Fri) Filter Sign Reset Elevating Grille Simple Timer 15:10(Fri)
  • Page 233 B E M Æ R K ! Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 PROGRAMMERET BETJENING 14.5.1 Program indstilling Weekly Schedule Setting 15:10(Fri) Menu 15:10(Fri) Filter Sign Reset SEL. ENT. RTN. Elevating Grille Function 3 Simple Timer Weekly Schedule Setting 15:10(Fri) Schedule Timer SEL.
  • Page 234 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH SPEED Holiday Setting 15:10(Fri) B E M Æ R K ! SEL.
  • Page 235 14.5.3 Program ON/OFF indstilling Schedule ON/OFF 15:10(Fri) Turn ON schedule function? Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer SEL. ENT. RTN. Schedule Timer SEL. ENT. RTN. B E M Æ R K ! Schedule Timer 15:10(Fri) Day/Time Setting Holiday Setting Schedule ON/OFF...
  • Page 236 14.6.2 Louver Setting Menu 15:10(Fri) 01-01 Louver Setting 01-02 Louver Open/Close 01-03 VENTI 01-04 Total Heat Exchanger SET Select unit to set. Function 10 SEL. ENT. RTN. SEL. ENT. RTN. B E M Æ R K ! Louver Setting Louver Setting Cancel INDV Louver SET Louver Setting:01-03 SEL.
  • Page 237 14.7 SPJÆLD ÅBN/LUK Louver Open/Close Open louver? Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET SEL. ENT. RTN. Function 10 SEL. ENT. RTN. B E M Æ R K ! 14.8 VENTILATION VENTI SEL'D UNIT A/C + VENTI ENT.
  • Page 238 14.9 INDSTILLING AF KOMPLET VARMEVEKSLER Total Heat Exchanger SET VENTI Mode THEX VENTI B E M Æ R K ! ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Total Heat Exchanger SET Function 10 Fix setting of total heat exchanger? SEL.
  • Page 239 14.11 SPROGINDSTILLING Language Setting English Adjusting Date/Time Français Screen Display Setting Deutsch Function 13 Italiano Español SEL. ENT. RTN. SEL. ENT. RTN. Screen Display Setting Language Setting Display Adjustment Language Setting Initialize room name and Temperature Unit contact info. to switch language? SEL.
  • Page 240 14.13 INDSTILLING AF SKÆRMVISNING 14.13.1 Display Adjustment Adjusting Date/Time Time Format 24Hour(11:04) Brightness Function 13 Back light 15 Seconds Contrast On/Off lamp SEL. ENT. RTN. SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit Display Adjustment SEL. ENT.
  • Page 241 14.14 VÆRELSESNAVN REGISTRERING Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Sym.2 € <...
  • Page 242 15.2 INDIKATORER PÅ LCD-SKÆRMEN About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. UPDW : Grille has not been correctly positioned. : Operation mode is locked. FLTR : Clean Air Filter. Help Menu Next Page RTN. About Indication About Operation Troubleshooting Contact Information SEL.
  • Page 243 15.4 FEJLFINDING Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product. Next Page RTN.
  • Page 244 16 ANDRE INDIKATIONER 16.1 UNDER NORMALE FORHOLD 16.1.1 16.1.4 Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED TEMP HEAT HEAT Central Control HOT-ST Turned ON LOUV. Turned ON 16.1.2 Termostat Meeting Room MODE SPEED LOUV. TEMP HEAT 16.1.3 Afrimning HOT-ST LOUV.
  • Page 245 16.2 UNDER UNORMALE FORHOLD 16.2.1 Unormal drift 16.2.3 16.2.2...
  • Page 247 1 VEILIGHEIDSSAMENVATTING O P M E R K I N G G E VA A R L E T O P verspreid. houdende omgeving). In een zure of basische omgeving. 2 INSTALLATIEWERK 2.1 SELECTEREN VAN DE INSTALLATIEPLAATS...
  • Page 248 2.2 VÓÓR INSTALLATIE Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 INSTALLATIERUIMTE > 50mm 2.4 INSTALLATIEPROCEDURE Draw-out Hole Groove for...
  • Page 249 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 ELEKTRISCHE BEDRADING O P M E R K I N G REMOCON REMOCON REMOCON REMOCON L E T O P 50mm...
  • Page 250 4 SCHAKELAARS: NAMEN EN FUNCTIES Indicator geprogrammeerde Indicator Indicator Indicatie ventilatorsnelheid Vergrendelingsindicator Indicator FLTR Filterindicator Indicator bedieningsmodus Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH Indicator temperatuur LOUV. Menu-toets Help-toets Enter-toets Terug-toets Bediening O P M E R K I N G...
  • Page 251 5 CONTROLEPROCEDURE RTN. SEL. O P M E R K I N G...
  • Page 252 6 FUNCTIES SELECTEREN EN INSTELLEN Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3 Output1...
  • Page 253 Individuele Items Optionele functie Insteloptie Inhoud instelling × × × × × × × × ×...
  • Page 254 Individuele Items Optionele functie Insteloptie Inhoud instelling × × ×...
  • Page 255 Individuele Items Optionele functie Insteloptie Inhoud instelling × × × × × × × × × × × × × × ×...
  • Page 256 Individuele Items Optionele functie Insteloptie Inhoud instelling × × × × × O P M E R K I N G...
  • Page 257 Weergave van ingangsnummer Poort Weergave ingang/uitgang Instellingsoptie Indicator Indicator Ingang Uitgang O P M E R K I N G...
  • Page 258 7 HET HEFFEN VAN HET ROOSTER/ANNULEREN Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3 CN8 1-2...
  • Page 259 8 LAMELINSTELLING Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL. ENT.
  • Page 260 9 CONTACTGEGEVENS REGISTEREN Contact Information 1 Sym.1 € Sym.2 < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN. 10 CONTROLEMENU Functie...
  • Page 261 11 BEDIENINGSMETHODE 11.1 BASISFUNCTIES Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP HEAT HIGH COOL SPEED MODE LOUV. 11.2 BEDRIJFSMODI (KOELEN, VERWARMEN, ONTVOCHTIGEN, AUTOMATISCH KOELEN/ VERWARMEN, VENTILATIE) Functie Connecting Meeting Room MODE SPEED TEMP COOL HIGH SPEED O P M E R K I N G AUTO...
  • Page 262 12 DE MODUS INSTELLEN 12.1 TEMPERATUUR INSTELLEN O P M E R K I N G Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 VENTILATORSNELHEID O P M E R K I N G Meeting Room MODE SPEED...
  • Page 263 12.3 RICHTING VAN LAMELLEN INSTELLEN Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP O P M E R K I N G O P M E R K I N G 13 BEDIENING 13.1 STARTEN O P M E R K I N G...
  • Page 264 13.2 STOPPEN O P M E R K I N G Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 VERGRENDELEN Meeting Room MODE SPEED TEMP COOL HIGH SPEED O P M E R K I N G Meeting Room MODE SPEED TEMP COOL...
  • Page 265 14.2 DE MELDING VAN FILTERREINIGING RESETTEN O P M E R K I N G FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. 15:10(Fri) Menu Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN.
  • Page 266 Elevating Grille UPDW Elevating Grille:All UPDW 00-00 01-01 Press to raise/lower grille 02-02 SEL. ENT. RTN. RTN. O P M E R K I N G Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 ENKELVOUDIGE TIMER Menu 15:10(Fri) Filter Sign Reset Simple Timer 15:10(Fri) Elevating Grille...
  • Page 267 O P M E R K I N G Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 GEPROGRAMMEERDE WERKING 14.5.1 Voorbeeld: Weekly Schedule Setting 15:10(Fri) SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Weekly Schedule Setting 15:10(Fri) Elevating Grille Function 3 Simple Timer Schedule Timer...
  • Page 268 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH Holiday Setting 15:10(Fri) SPEED SEL. HOL. ON/OFF ENT. RTN.
  • Page 269 14.5.3 15:10(Fri) Schedule ON/OFF Turn ON schedule function? Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 SEL. ENT. RTN. Simple Timer Schedule Timer SEL. ENT. RTN. O P M E R K I N G Schedule Timer 15:10(Fri) Day/Time Setting Holiday Setting Schedule ON/OFF SEL.
  • Page 270 14.6.2 De lamelleninstelling annuleren Louver Setting 01-01 01-02 Menu 15:10(Fri) 01-03 Louver Setting Louver Open/Close 01-04 VENTI Select unit to set. Total Heat Exchanger SET SEL. ENT. RTN. Function 10 SEL. ENT. RTN. O P M E R K I N G Louver Setting Louver Setting Cancel INDV Louver SET...
  • Page 271 14.7 LAMELLEN OPENEN/SLUITEN Louver Open/Close Open louver? Menu 15:10(Fri) SEL. ENT. RTN. Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 O P M E R K I N G SEL. ENT. RTN. 14.8 VENTILATIE Functie VENTI SEL'D UNIT A/C + VENTI O P M E R K I N G ENT.
  • Page 272 14.9 DE TOTALE WARMTEWISSELAAR INSTELLEN Total Heat Exchanger SET VENTI Mode THEX VENTI O P M E R K I N G ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close Total Heat Exchanger SET VENTI Total Heat Exchanger SET Fix setting of Function 10 total heat exchanger? SEL.
  • Page 273 14.11 DE TAAL INSTELLEN Language Setting English Français Adjusting Date/Time Deutsch Screen Display Setting Italiano Function 13 Español SEL. ENT. RTN. SEL. ENT. RTN. Language Setting Screen Display Setting Initialize room name and Display Adjustment contact info. to switch Language Setting language? Temperature Unit SEL.
  • Page 274 14.13 HET SCHERM INSTELLEN 14.13.1 Instelling scherm Functie Adjusting Date/Time Function 13 Display Adjustment Time Format 24Hour(11:04) Brightness SEL. ENT. RTN. Back light 15 Seconds Contrast On/Off lamp SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit SEL.
  • Page 275 14.14 DE KAMERNAAM REGISTEREN Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Sym.2 €...
  • Page 276 15.2 WEERGAVES OP HET LCD-SCHERM About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. : Grille has not been correctly UPDW positioned. : Operation mode is locked. FLTR : Clean Air Filter. Help Menu Next Page RTN. About Indication About Operation Troubleshooting Contact Information...
  • Page 277 15.4 PROBLEMEN OPSPOREN Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product. Next Page RTN.
  • Page 278 16 OVERIGE WEERGAVES 16.1 BIJ NORMAAL BEDRIJF 16.1.1 Centrale besturing 16.1.4 Bedieningsregeling Meeting Room MODE SPEED LOUV. TEMP Meeting Room HEAT MODE SPEED TEMP HEAT Central Control Turned ON HOT-ST LOUV. 16.1.2 Thermobesturing Turned ON Meeting Room MODE SPEED LOUV. TEMP 16.1.3 Ontdooien HEAT...
  • Page 279 16.2 ABNORMALE BEDRIJFSOMSTANDIGHEDEN 16.2.1 Storing 16.2.3 16.2.2 Stroomstoring...
  • Page 281 1 SÄKERHETSSAMMANFATTNING O B S ! FA R A ! VA R N I N G llor) 2 INSTALLATIONSARBETE 2.1 VAL AV PLATS FÖR INSTALLATIONSARBETE...
  • Page 282 2.2 FÖRE INSTALLATIONEN Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. 2.3 INSTALLATIONSPLATS > 50mm 2.4 INSTALLATION Draw-out Hole Groove for...
  • Page 283 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. 3 ELEKTRISKA LEDNINGAR O B S ! REMOCON REMOCON REMOCON REMOCON VA R N I N G 50mm 100mm...
  • Page 284 4 KNAPPAR OCH FUNKTIONER timer rumsnamn FLTR Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH inställning LOUV. RUN/STOP- Pil-tangent Enter-tangent Driftdel O B S !
  • Page 285 5 KONTROLLPROCEDUR RTN. SEL. O B S !
  • Page 286 6 FUNKTIONSVAL OCH INSTÄLLNING Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3 Output1...
  • Page 287 Individuell Inställ- inställning ningsläge × × × × × × × × ×...
  • Page 288 Individuell Inställ- inställning ningsläge × × ×...
  • Page 289 Individuell Inställ- inställning ningsläge × × × × × × × × × × × × × × ×...
  • Page 290 Individuell Inställ- inställning ningsläge × × × × × O B S !
  • Page 291 Port Indata O B S !
  • Page 292 7 INSTÄLLNING/ANNULLERING AV DET HÖJ- OCH SÄNKBARA GALLRET Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3...
  • Page 293 8 SPJÄLLINSTÄLLNING Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL. ENT.
  • Page 294 9 REGISTRERING AV KONTAKTINFORMATION Contact Information 1 Sym.1 € Sym.2 < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN. 10 KONTROLLMENY...
  • Page 295 11 DRIFTMETOD 11.1 VANLIG DRIFT Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP HEAT HIGH COOL SPEED MODE LOUV. 11.2 DRIFTLÄGE (KYLNING, UPPVÄRMNING, AVFUKTNING, AUTOMATISK KYLNING/ UPPVÄRMNING OCH FLÄKT) Connecting Meeting Room MODE SPEED TEMP COOL HIGH SPEED O B S !
  • Page 296 12 INSTÄLLNINGSMETOD 12.1 TEMPERATURINSTÄLLNING O B S ! Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 FLÄKTHASTIGHET O B S ! Meeting Room MODE SPEED TEMP COOL HIGH MODE TEMP HIGH 2 HIGH AUTO Meeting Room...
  • Page 297 12.3 SPJÄLLRIKTNING Meeting Room Meeting Room MODE SPEED LOUV. TEMP MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP O B S ! O B S ! 13 DRIFT 13.1 DRIFTSSTART O B S ! Meeting Room MODE SPEED LOUV.
  • Page 298 13.2 DRIFTSSTOPP O B S ! Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 DRIFTSLÅS Meeting Room MODE SPEED TEMP COOL HIGH SPEED O B S ! Meeting Room MODE SPEED TEMP COOL HIGH 14 DRIFTSMENY 14.1 MENY Menu 15:10(Fri) Filter Sign Reset O B S !
  • Page 299 14.2 ÅTERSTÄLLNING AV FILTERTECKEN O B S ! FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. 14.3 HÖJ- OCH SÄNKBART GALLER O B S ! VA R N I N G Menu 15:10(Fri)
  • Page 300 Elevating Grille UPDW 00-00 01-01 Elevating Grille:All UPDW 02-02 Press to raise/lower grille SEL. ENT. RTN. RTN. O B S ! Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 ENKEL TIMER Menu 15:10(Fri) Filter Sign Reset Simple Timer 15:10(Fri) Elevating Grille Timer Ope.
  • Page 301 O B S ! Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 SCHEMALAGD DRIFT Exempel: 14.5.1 Inställning av schema Weekly Schedule Setting 15:10(Fri) Menu 15:10(Fri) Filter Sign Reset SEL. ENT. RTN. Elevating Grille Function 3 Simple Timer Weekly Schedule Setting 15:10(Fri) Schedule Timer SEL.
  • Page 302 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH Holiday Setting 15:10(Fri) SPEED SEL. HOL. ON/OFF ENT. RTN.
  • Page 303 14.5.3 Schemalägga AV/PÅ-inställningar 15:10(Fri) Schedule ON/OFF Menu 15:10(Fri) Turn ON schedule function? Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. SEL. ENT. RTN. O B S ! 15:10(Fri) Schedule Timer Day/Time Setting Holiday Setting Schedule ON/OFF SEL.
  • Page 304 14.6.2 Louver Setting Menu 15:10(Fri) 01-01 Louver Setting 01-02 Louver Open/Close 01-03 VENTI 01-04 Total Heat Exchanger SET Select unit to set. Function 10 SEL. ENT. RTN. SEL. ENT. RTN. O B S ! Louver Setting Louver Setting Cancel INDV Louver SET Louver Setting:01-03 SEL.
  • Page 305 14.7 SPJÄLL ÖPPET/STÄNGT Louver Open/Close Open louver? Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET SEL. ENT. RTN. Function 10 SEL. ENT. RTN. O B S ! 14.8 VENTILATION VENTI SEL'D UNIT A/C + VENTI ENT. RTN. O B S ! VENTI Menu...
  • Page 306 14.9 INSTÄLLNING AV TOTAL VÄRMEVÄXLARE Total Heat Exchanger SET VENTI Mode THEX VENTI O B S ! ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Total Heat Exchanger SET Function 10 Fix setting of total heat exchanger? SEL.
  • Page 307 14.11 SPRÅKINSTÄLLNINGAR Language Setting English Adjusting Date/Time Français Screen Display Setting Deutsch Function 13 Italiano Español SEL. ENT. RTN. SEL. ENT. RTN. Screen Display Setting Language Setting Display Adjustment Language Setting Initialize room name and Temperature Unit contact info. to switch language? SEL.
  • Page 308 14.13 INSTÄLLNING AV SKÄRM 14.13.1 Adjusting Date/Time Display Adjustment Function 13 Time Format 24Hour(11:04) Brightness Back light 15 Seconds Contrast SEL. ENT. RTN. On/Off lamp SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit SEL. ENT. RTN. Display Adjustment Save changes? Display Adjustment...
  • Page 309 14.14 REGISTRERING AV RUMSNAMN Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Room Name Sym.2 €...
  • Page 310 15.2 INDIKATORER PÅ LCD-SKÄRMEN About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. UPDW : Grille has not been correctly positioned. : Operation mode is locked. FLTR : Clean Air Filter. Help Menu Next Page RTN. About Indication About Operation Troubleshooting Contact Information Help Menu...
  • Page 311 15.4 FELSÖKNING Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product. Next Page RTN.
  • Page 312 16 ÖVRIGA INDIKATIONER 16.1 I NORMALT LÄGE 16.1.1 16.1.4 Meeting Room MODE SPEED LOUV. TEMP Meeting Room HEAT MODE SPEED TEMP HEAT Central Control Turned ON HOT-ST LOUV. 16.1.2 Turned ON Meeting Room MODE SPEED LOUV. TEMP HEAT 16.1.3 Avfrostning HOT-ST LOUV.
  • Page 313 16.2 ONORMALA FÖRHÅLLANDEN 16.2.1 Onormal drift 16.2.3 16.2.2 Strömavbrott...
  • Page 316 Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. > 50mm Draw-out Hole Groove for...
  • Page 317 Implanted Switch Box Implanted Switch Box (JIS Box) for 2 Switches (JIS Box) for 1 Switch the protection film. M4 Screws (Field-Supplied) Connect the terminals. REMOCON REMOCON REMOCON REMOCON 50mm 100mm...
  • Page 318 FLTR Meeting Room FLTR MODE SPEED LOUV. TEMP COOL HIGH LOUV. Enter...
  • Page 319 RTN. SEL.
  • Page 320 Test Run Menu Test Run Function Selection Thermistor Selection Input/Output Function 5 SEL. ENT. RTN. Function Selection 01-01 01-02 01-03 01-04 SEL. ENT. RTN. Function Selection:01-03 Input/Output:01-03 Item Setting Item Setting Connector Input 1 CN3 1-2 Input 2 CN3 2-3 Output1 CN7 1-2 Output2...
  • Page 321 Optional Function × × × × × × × × ×...
  • Page 322 Optional Function × ×...
  • Page 323 Optional Function × × × × × × × × × × × × × × ×...
  • Page 324 Optional Function × × × × × ×...
  • Page 326 Input/Output:01-03 Input/Output:01-03 Item Setting Connector Item Setting Connector Input 1 CN3 1-2 Input 1 CN3 1-2 Input 2 CN3 2-3 Input 2 CN3 2-3 Output1 CN7 1-2 Output1 CN7 1-2 Output2 CN7 1-3 Output2 CN7 1-3 Output3 CN8 1-2 Output3 CN8 1-2 SEL.
  • Page 327 Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN. Louver Setting 01-01 01-02 01-03 01-04 Select unit to set. SEL. ENT. RTN. Louver Setting:01-03 Adjust air direction &...
  • Page 328 Contact Information 1 Sym.1 € Sym.2 < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Contact Information Electric Corp. Save changes? SEL. ENT. RTN.
  • Page 329 11.1 Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP HEAT HIGH COOL SPEED MODE LOUV. 11.2 Connecting Meeting Room MODE SPEED TEMP COOL HIGH SPEED AUTO HEAT COOL Meeting Room MODE SPEED TEMP HEAT HIGH SPEED...
  • Page 330 12.1 Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH SPEED 12.2 Meeting Room MODE SPEED TEMP COOL HIGH MODE TEMP HIGH 2 HIGH AUTO Meeting Room MODE SPEED TEMP COOL MODE TEMP...
  • Page 331 12.3 Meeting Room MODE SPEED LOUV. TEMP Meeting Room MODE SPEED LOUV. TEMP COOL COOL SPEED TEMP SPEED TEMP 13.1 Meeting Room MODE SPEED LOUV. TEMP COOL MODE LOUV.
  • Page 332 13.2 Meeting Room MODE SPEED TEMP COOL MODE TEMP 13.3 Meeting Room MODE SPEED TEMP COOL HIGH SPEED Meeting Room MODE SPEED TEMP COOL HIGH 14.1 Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT.
  • Page 333 14.2 FLTR Filter Sign Reset Reset filter sign? SEL. ENT. RTN. Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. 14.3 Menu 15:10(Fri) Filter Sign Reset Elevating Grille Function 3 Wire Simple Timer Schedule Timer SEL.
  • Page 334 Elevating Grille UPDW Elevating Grille:All UPDW 00-00 01-01 02-02 Press to raise/lower grille SEL. ENT. RTN. RTN. Elevating Grille:All UPDW Press to raise/lower grille RTN. 14.4 Menu 15:10(Fri) Filter Sign Reset Simple Timer 15:10(Fri) Elevating Grille Timer Ope. Everyday Function 3 ON Time 08 : 30 Simple Timer...
  • Page 335 Meeting Room MODE SPEED TEMP COOL HIGH SPEED 14.5 14.5.1 Weekly Schedule Setting 15:10(Fri) 15:10(Fri) Menu Filter Sign Reset SEL. ENT. RTN. Elevating Grille Function 3 Simple Timer Weekly Schedule Setting 15:10(Fri) Schedule Timer SEL. ENT. RTN. SEL. ENT. RTN. Schedule Timer 15:10(Fri) Day/Time Setting...
  • Page 336 Timer Setting (Mon) 15:10(Fri) Set the timer? Schedule Timer 15:10(Fri) Day/Time Setting Set other day Holiday Setting SEL. ENT. RTN. Schedule ON/OFF SEL. ENT. RTN. Meeting Room MODE SPEED TEMP COOL HIGH SPEED Holiday Setting 15:10(Fri) SEL. HOL. ON/OFF ENT. RTN.
  • Page 337 14.5.3 Schedule ON/OFF 15:10(Fri) Menu 15:10(Fri) Turn ON schedule function? Filter Sign Reset Elevating Grille Function 3 Simple Timer Schedule Timer SEL. ENT. RTN. SEL. ENT. RTN. Schedule Timer 15:10(Fri) Day/Time Setting Holiday Setting Schedule ON/OFF SEL. ENT. RTN. 14.6 14.6.1 Menu 15:10(Fri)
  • Page 338 14.6.2 Menu 15:10(Fri) Louver Setting Louver Setting 01-01 Louver Open/Close 01-02 VENTI 01-03 Total Heat Exchanger SET 01-04 Function 10 Select unit to set. SEL. ENT. RTN. SEL. ENT. RTN. Louver Setting Louver Setting Cancel INDV Louver SET SEL. ENT. RTN.
  • Page 339 14.7 Louver Open/Close Open louver? Menu 15:10(Fri) SEL. ENT. RTN. Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Function 10 SEL. ENT. RTN. 14.8 VENTI SEL'D UNIT A/C + VENTI ENT. RTN. VENTI Menu 15:10(Fri) Louver Setting Fix desired mode? Louver Open/Close VENTI Total Heat Exchanger SET...
  • Page 340 14.9 Total Heat Exchanger SET VENTI Mode THEX VENTI ENT. RTN. Menu 15:10(Fri) Louver Setting Louver Open/Close VENTI Total Heat Exchanger SET Total Heat Exchanger SET Function 10 Fix setting of total heat exchanger? SEL. ENT. RTN. SEL. ENT. RTN. 14.10 Adjusting Date/Time 01 01...
  • Page 341 14.11 Language Setting English Français Deutsch Adjusting Date/Time Italiano Screen Display Setting Español Function 13 SEL. ENT. RTN. SEL. ENT. RTN. Language Setting Screen Display Setting Initialize room name and Display Adjustment contact info. to switch Language Setting language? Temperature Unit SEL.
  • Page 342 14.13 14.13.1 Adjusting Date/Time Function 13 Display Adjustment Time Format 24Hour(11:04) Brightness SEL. ENT. RTN. Back light 15 Seconds Contrast On/Off lamp SEL. ENT. RTN. Screen Display Setting Display Adjustment Language Setting Temperature Unit SEL. ENT. RTN. Display Adjustment Save changes? Display Adjustment Time Format 24Hour(11:04)
  • Page 343 14.14 Room Name Meeting Roo Sym.1 Sym.2 € < > SPAC DEL ← → FIN. SEL. Letter ENT. FIN. Adjusting Date/Time Screen Display Setting Function 13 Room Name SEL. ENT. RTN. Room Name Meeting Room Sym.1 Room Name Sym.2 € <...
  • Page 344 15.2 About Indication : Air Conditioning Operation. VENTI : Ventilation Operation. : Grille has not been correctly UPDW positioned. : Operation mode is locked. Help Menu FLTR : Clean Air Filter. About Indication Next Page RTN. About Operation Troubleshooting Contact Information SEL.
  • Page 345 15.4 Troubleshooting Following do not indicate a failure Unit does not operate. Condition: is indicated on the HOT-ST display of the remote comtrol switch. Cause: The control to heat compressor is activated in order to extend the life of the product. Next Page RTN.
  • Page 346 16.1 16.1.1 16.1.4 Meeting Room MODE SPEED LOUV. TEMP HEAT Meeting Room MODE SPEED TEMP Central Control HEAT Turned ON HOT-ST 16.1.2 LOUV. Turned ON Meeting Room 16.1.3 MODE SPEED LOUV. TEMP HEAT HOT-ST LOUV. Turned ON Meeting Room MODE SPEED LOUV. TEMP HEAT LOUV.
  • Page 347 16.2 16.2.1 16.2.3 16.2.2...
  • Page 350 PMML0225A rev. 1 - 09/2011 - P5414866 Printed in Japan...

Table of Contents

Save PDF