Preparing For The "Bravia" Sync - Sony STR-DH700 Operating Instructions Manual
Multi channel
Hide thumbs
Also See for STR-DH700:
- Operating instructions manual (108 pages) ,
- Service manual (96 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, tum the Control
for HOMI function on for both the receiver
and the connected component. The receiver is
compatible with the "Control for HOMI-Easy
Setting" function.
When your TV is compatible
with the "Control for HDMI-Easy
Setting" function
When you connect a Sony TV with the
"Control for HOMI-Easy Setting" function,
the Control for HOMI function of the receiver
can be turned on simultaneously by turning the
Control for HOMI function of the TV on.
1
Make sure that the receiver, TV, and
playback components are connected
using an HOMI cable (not supplied).
(The respective components must be
compatible with the Control for HOMI
function.)
2
Turn on the receiver, TV and playback
components.
3
Turn the Control for HOMI function of
the TV on.
The Control for HOMI function of the
receiver and all the connected components
are simultaneously turned on. Ouring
setup, "CONTROL", "SCAN FOR" and
"HOMI" appear sequentially in the display,
and once setting is completed,
"COMPLETE" will appear. Wait until the
setup is complete.
For details on setting the TV, refer to the
operating instructions supplied with the TV.
76
US
When your TV is not compatible
with the "Control for HDMI-Easy
Setting" function
Tum the Control for HOMI function of the
receiver and the connected component on
individually.
AMP
(_t-it--
MENU
8,
+/+/./.
1
Perform the steps given in "When your
TV is compatible with the "Control for
HOMI-Easy Setting" function"
(page 76).
2
Press AMP MENU.
"I-LEVEL" appears on the display.
3
Press
+1+
repeatedly to select "6-
HOMI".
4
Press
8
or
+
to enter the menu.
S
Press
+1+
repeatedly to select
"CONTROL FOR HOM I".
"CONTROL FOR HOMI" scrolls across
the display, then "CONTROL" appears.
6
Press
8
or
+
to enter the parameter.
7
Press
+1+
repeatedly to select "CTRL
ON".
Control for HOMI function is activated.
8
Select the HOMI input of the receiver
and TV to match the HOMI input of the
connected component, so that the
image from the connected component
is displayed.
Advertisement
Table of Contents
