Front Suspension Spring Preload (For Rxw10Gtw); Front Shock Absorber Air Pressure (Except For Rxw10Gtw) - Yamaha RX10LTGTYL Service Manual

Available languages

FRONT SUSPENSION SPRING PRELOAD (For RXW10GTW)

FRONT SUSPENSION SPRING PRELOAD

(For RXW10GTW)

This shock absorber contains highly pres-

surized nitrogen gas. Do not tamper with or

attempt to open the shock absorber assem-

Do not subject the shock absorber assem-

bly to open flame or high heat, which could

cause it to explode.

Be sure that the left and right spring pre-

loads are the same.

1. Loosen the locknut

2. Adjust the spring preload by turning the

3. Tighten the locknut

FRONT SHOCK ABSORBER AIR

PRESSURE (Except for RXW10GTW)

This snowmobile is equipped with FOX shock

absorbers as standard equipment.

The air pressure of the shock absorbers can

be adjusted using the special pump

included with your snowmobile.

The following procedure applies to both shock

1. Place the snowmobile on a level surface

and apply the parking brake.

2. Lift the front of the snowmobile onto a suit-

able stand to raise the skis off the ground.

Show Quick Links