Color Temperature; Green Tally - Sony PMW-350K Operating Instructions Manual
Solid-state memory camcorder
Hide thumbs
Also See for PMW-350K:
- Operating instructions manual (180 pages) ,
- Manual (37 pages) ,
- Brochure & specs (35 pages)
Table of Contents
Advertisement
x2D: The digital extender function of this
camcorder is on.
Ex2D: The lens extender and the digital extender
function of this camcorder are both on.
Digital extender function can be turned on or off
by an assignable switch to which Digital Extender
is assigned.
b Zoom position (when the lens is
mounted)
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
c Focus position (when the serial lens is
mounted)
Indicates the focus position as distance to the
subject (in units of m).
d Green tally
Lights when the camcorder is the following
states.
• MAINTENANCE >Camera Config >HD-SDI
Remote I/F is set to [G-Tally] in the setup menu
and a recording control signal is output from the
HD/SD SDI OUT connector.
• Green tally signal received (when a camera
adaptor is mounted on the camcorder and a
camera extension unit is connected)
e Media status
Displays the name of the currently active media
slot (A or B).
f Recording mode/operation status
Indicates the current recording mode/operation
status as follows.
Indication
Meaning
zREC
Recording in progress
STBY
Standby for recording
zCACHE
Standby in Picture Cache mode
zINT REC
Recording in progress in Interval
Recording mode
zINT STBY Standby for next recording in
Interval Recording mode
INT STBY
Standby in Interval Recording
mode
zFRM REC Recording in progress in Frame
Recording mode
zFRM
Standby for next recording in
STBY
Frame Recording mode
FRM STBY
Standby in Frame Recording mode
Indication
Meaning
zS&Q REC Recording in progress in Slow &
Quick Motion mode
S&Q STBY
Standby in Slow & Quick Motion
mode
zCALL
Being called from a connected
device
BREVIEW
During recording review
g Wireless receiver reception level
When a wireless receiver is installed in the
camcorder, "W" appears together with four
segment reception level indicators for each of the
channels (1 to 4) that can be used by the receiver.
The indications are as follows.
In normal situation: The number of white
segments indicates the strength of the signal
level.
Muting (for an analog receiver) or error rate
aggravation (for a digital receiver): The
number of gray segments indicates the
strength of the signal level.
Reception level over peak: "P" is displayed
instead of the indicators.
Tuner battery is low: The channel number and
indicator of the corresponding channel
1)
flash.
1) When an optional DWR-S01D is used
h Battery remaining/voltage capacity
The following is displayed depending on the type
of power source.
Type of power
What is displayed
source
InfoLithium
Remaining battery capacity icon
battery
and remaining recording time
Anton Bauer
Remaining battery capacity (%
battery
indication)
Other type than
Input voltage
above
i External power input
Appears when power is supplied from an external
power source connected to the DC IN connector.
j Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 1.5 K to 50.0 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the Offset White setting (see
page 112).
No display: Offset White is OFF
Viewfinder Screen Display
1)
29
Advertisement
Table of Contents
