Table of Contents
Advertisement
5.3.3
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a
RAID volume hard disk drive deletes all internal RAID structure on the drive.
To reset a RAID set:
1.
From the utility main menu, select 3. Reset Disks to Non-RAID and press <Enter>.
2.
Press the up/down arrow keys to select the drive(s) or disks of the RAID set you want
to reset, then press <Space>. A small triangle before the Port number marks the
selected drive. Press <Enter> when you are done.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port
0
1
[
3.
Press <Y> in the confirmation window to reset the drive(s) or press <N> to return to the
utility main menu.
5-28
[
RESET RAID DATA
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
Drive Model
Serial #
ST3300656SS
HWAS0000991753TR
ST3300656SS
37VN00009846RAJ1
Select the disks that should be reset.
]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
]
Size
Status
279.3GB
Member Disk
279.3GB
Member Disk
Chapter 5: RAID configuration
- Quick Links:
- Memory Configurations
- Jumpers
Hide quick links:
Advertisement
Table of Contents
