System Board; Procedure 2 Connection Check; Procedure 3 Replacement Check - Toshiba Satellite A500 Service Manual
Hide thumbs
Also See for Satellite A500:
- User manual (269 pages) ,
- Manual del usuario (248 pages) ,
- Resource manual (60 pages)
Table of Contents
Advertisement
2 Troubleshooting
Procedure 2 Connection Check
Power is supplied to the system board as illustrated below:
AC power cord
Follow the steps below to check whether each connector has been connected correctly:
Check 1
Make sure the AC adaptor and AC power cord have been firmly plugged
into the DC IN socket and wall outlet, respectively. When they have been
connected correctly, perform Check 2.
Check 2
Connect a new AC adaptor and AC power cord.
• If the DC IN LED does not go on, go to Procedure 3.
• If the battery LED does not go on, perform Check 3.
Check 3
Make sure the battery pack has been correctly installed in the computer. If
the battery LED does not go on while the battery pack has been installed
correctly, go to Procedure 3.
Procedure 3 Replacement Check
The system board, power supply board, or CPU may be faulty. Disassemble the computer
according to Chapter 4 and follow the steps below:
Check 1
Replace the power supply board with a new one. If the battery pack is still
not working properly, perform Check 2.
Check 2
Replace the system board with a new one. If the battery pack is still not
working properly, perform Check 3.
Check 3
Replace
2-8
AC
adaptor
AC adaptor cord
the
CPU
Satellite/Satellite Pro/A500/A505/A507/dynabook
2.3 Power Supply
System board
Battery pack
with
a
Maintenance Manual
new
one.
Hide quick links:
Advertisement
Chapters
Table of Contents
