Table of Contents
Advertisement
2.
Enter the Pattern number directly with the numeric keys.
3. Press +1/YES. The display will show "executing", then
"completed".
JOBS #11 - #15: LOAD DATA
FUNCTION
Loads various kinds of data from a cartridge
or cassette.
Refer to the CASSETTE/CARTRIDGE Menu on the RX7
front panel and the TABLE OF CASSETTE/CARTRIDGE
JOBS above to determine the appropriate Job number for
the type of data to be loaded.
Since loading single Patterns from a cartridge or cassette (Job
#13) necessitates slightly different procedures, these are ex-
plained separately below.
The Load operations correspond to the Save operations ex-
plained above.
GENERAL LOAD OPERATION
1. Select the desired Job #11, #12, #14 or #15.
The display will ask you to confirm your choice of data
type.
2. Press +1/YES if you want to load the displayed data.
The LCD will ask for confirmation:
3. Press +1/YES again to confirm.
The display will show
then
indicating that the data has been loaded to the RX7.
LOADING SINGLE PATTERNS FROM
A CARTRIDGE
1 . Select Job #13 in Cartridge Mode.
The display will ask you to confirm:
2.
Press +1/YES. The display will change to
3. You can now specify the cartridge location you wish to
load from as well as the Pattern number you want to load
it to. (Use ACCENT 2 to switch between them.)
* If the specified Pattern number already contains data, it
will be erased when you execute Load.
4. Press +1/YES.
The LCD will ask you to confirm.
5.
Press +1/YES again.
The display will show "executing", then "completed".
LOADING SINGLE PATTERNS FROM
A CASSETTE
1. First select the Pattern location you wish to load cassette
data to (in Pattern Select mode).
2. Select Job #13 in Cassette Mode.
The display will ask you to input the PTN number.
3. Enter the Pattern number directly with the numeric keys,
then press +1/YES. The display will ask you to confirm:
4. Press +1/YES again. The display will show "executing",
then "completed".
43
Advertisement
Table of Contents
