Samsung CLX-8540ND Service Manual page 240

Digital color laser mfp

Hide thumbs Also See for CLX-8540ND:

Table of Contents

● Troubleshooting method :

Troubleshooting

3. Check if the pick up roller rubber is worn out or

contaminated.

4. Check the following.

-. Check if the Feed Sensor is assembled properly.

-. Check if the harness of the Feed Sensor is

connected properly.

-. Enter the EDC mode. Execute the Feed Sensor test.

Test Routines

Test Routine

5. Check if the Harness is defective.

Check if the connector is connected properly.

Copier Engine/DADF

Status check

Troubleshooting