Table of Contents
Advertisement
7
FRONT SHOCK ABSORBER AND FRONT ARM
INSTALLATION
Reverse the "REMOVAL" procedures.
Note the following points.
1.Lubricate:
Bushings 1 (inner surface)
Lithium-soap base grease
2.Tighten:
Nut 2 (lower arm)
Nut (lower arm):
45 Nm (4.5 m • kg, 32 ft • lb)
NOTE:
Be sure to position the front arm securing
bolts (front 1 and rear 2) so that the bolt
heads will face outward.
Å
Forward
3.Install:
Steering knuckle 1
4.Tighten:
Nut 2 (steering knuckle)
Nut (steering knuckle):
25 Nm (2.5 m • kg, 18 ft • lb)
7 - 32
CHAS
Advertisement
Chapters
Table of Contents
Troubleshooting
