ADJUSTING THE THROTTLE CABLE FREE PLAY
2. Remove:
• rider seat
Refer to "SEATS".
• fuel tank
Refer to "FUEL TANK".
• air filter case
Refer to "AIR FILTER CASE".
3. Adjust:
• throttle cable free play
M
MMM
M MMM
M
M MMM
M
NOTE:
_
When the throttle is opened, the accelerator
cable 1 is pulled.
Carburetor side
a. Loosen the locknut 2 on the decelerator
cable.
b. Turn the adjusting nut 3 in direction a or
b to take up any slack on the decelerator
cable.
c. Loosen the locknut 4 on the accelerator
cable.
d. Turn the adjusting nut 5 in direction a or
b until the specified throttle cable free play
is obtained.
Direction a
Direction b
e. Tighten the locknuts.
NOTE:
_
If the specified throttle cable free play cannot
be obtained on the carburetor side of the
cable, use the adjusting nut on the handlebar
side.
Handlebar side
a. Slide back the rubber cover 1.
b. Loosen the locknut 2.
c. Turn the adjusting nut 3 in direction a or
b until the specified throttle cable free play
is obtained.
3 - 18
CHK
ADJ
M MMM
M
M MMM
M
M MMM
M
Throttle cable free play
is increased.
Throttle cable free play
is decreased.
MMM