Phones Jack - Yamaha A-S2000 Owner's Manual

Hide thumbs Also See for A-S2000:

Table of Contents

PHONES jack

Outputs audio for private listening with headphones.

Note

When headphones are plugged in:

Both speaker sets connected to the SPEAKERS LlR CH A

and B terminals are turned off.

No signals are output at the PRE OUT jacks, while signals are

output at the REC jacks.

You cannot select MAIN DIRECT as the input source.

If headphones are plugged into the PHONES jack while

MAl

DIRECT is selected as the input source, no audio is

output at the PHONES jack.

TRIM

Adjusts the volume level when headphones are plugged in

to avoid sudden changes in volume.

Choices: -6 dB, 0 dB, +6 dB, + 12 dB

SPEAKERS

Turns on or off the speaker set connected to the

SPEAKERS L/R CH A and/or B terminals on the rear

panel.

• Switch to the OFF position to turn off both speaker

sets.

• Switch to the A or B position to turn on the speaker set

connected to the SPEAKERS L/R CH A or B

terminals.

• Switch to the A+B BI-WIRING position to turn on

both speaker sets.

Caution

If you use two sets (A and B), the impedance of each speaker

must be 8

or higher.

Table of Contents

Show Quick Links

Table of Contents