IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
CONTENTS Instructions for the User Instructions for the Installer Important Safety Information Technical Specification Description of the Appliance Installation Operation Positioning Before use Shelf holders Setting the temperature Freezing fresh food Electrical Connection Storage of frozen food Rear spacers Thawing Door Reversal Making ice cubes Fresh food refrigeration...
DESCRIPTION OF THE APPLIANCE A - Thermostat control for both compartments B - Dairy compartment C - Can storage shelf D - Bottle storage shelf E - Salad crisper F - Glass shelf G - Storage shelves H - Frozen food storage I - Ice trays J - Shelf for freezing fresh foods...
OPERATION Before using Place the food to be frozen on the shelf of the freezer as this is the coldest part. Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of Important soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may In the event of a power cut do not open the door.
Thawing Fresh food refrigeration To obtain the best performance, do not store warm Frozen food, prior to being used, can be thawed in food or evaporating liquids in the refrigerator; do the fridge or at room temperature depending on the cover or wrap the food, particularly if it has a strong time available.
Movable shelves The walls of the refrigerator have runners so that shelves can be positioned as desired. D040 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height. To do this proceed as shown in the diagram: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
HINTS AND TIPS Energy Saving Advice Normal Operating Sounds • You may hear faint gurgling or bubbling sounds • Do not install the appliance close to sources of when the refrigerant is pumped through the coils heat, such as a boiler or radiator. or tubing at the rear, to the cooling •...
MAINTENANCE AND CLEANING Changing the light bulb Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the Should the interior light fail to work, first switch off ELECTRICITY supply. the appliance and disconnect from the electricity supply, then replace the bulb as follows;...
Page 10
Remember to wash the defrost cleaner in hot soapy water at regular intervals. Dry throughly before replacing. Freezer When the frost has reached a thickness of up to 4mm it can be removed using a plastic scraper. During this operation it is not necessary to disconnect the appliance from the mains and remove the food.
SOMETHING NOT WORKING Important: If the appliance is not working correctly, please carry out the following checks before calling out an engineer. Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights.
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0 8 7 0 9 2 9 9 2 9 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
TECHNICAL SPECIFICATIONS DIMENSIONS Height Width Depth POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 120 W AVERAGE DAILY UNITS ELECTRICITY * 0.90 kWh GROSS CAPACITY Fridge 190 l Freezer 44 l NET CAPACITY Fridge 186 l Freezer 44 l This figure is based on standard test results in accordance with European Standard EN 153.
INSTALLATION Depending upon the position which you choose for Warning your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions IF YOU ARE DISCARDING AN OLD APPLIANCE on “Door reversal directions” paragraph. THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE Important...
A replacement cover/carrier must be obtained from WARNING: THIS APPLIANCE MUST BE your local Zanussi Service Force Centre. EARTHED. This appliance complies with the E.E.C. Directive The manufacturer declines any liability should No.
Rear spacers The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance. Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in Fig. Then turn them through 45°...