Table of Contents
Advertisement
'OSPEOT'ON
AOO"EPA'"
IENo
AUTOLUBE
PUMP
Wear or an internal malfunction may cause pump
output to vary from the factory setting. This situa-
tion is, however, extremely rare. If improper out-
put is suspected, inspect the following:
1. Inspect:
®Delivery line
Obstructions_ Blow out.
cO-ring
Wear/Damage _ Replace.
2. Inspect:
_
®Autolube pump drive gear teeth (_
.._
I_
oAutolube pump driven gear teeth (_
_i_?!i:!_!i
!_
Pitting/Wear/Damage--*
Replace.
F
CRANKSHAFT
-=
=-
1. Measure:
eRunout limit "C"
_Connecting rod big end side clearance "D"
oSmall end free play limit "'F"
Out of Specification_Replace.
Use V-Blocks, Dial Gauge and thickness
gauge.
Runout Limit "'C":
0.03 mm (0.0012 in)
Connecting
Rod Big End Side
Clearance "D":
0.2-0,5
mm (0.008-0.02
in)
Small End Free Play:
0.4-0.8
mm (0.015-0.031
in)
2. Inspect:
oBearings (Crankshaft)
Spin the bearing inner race.
Excessive play/Roughness_
Replace.
Pitting / Damage_ Replace.
3-20
- Quick Links:
- General Information
- Scooter Identification
Hide quick links:
Advertisement
Chapters
Table of Contents
