Table of Contents
Advertisement
DPR2325 and EPR2325 Front Panel LED Status Indicators
The front panel of your cable modem gateway provides LED status indicators that
indicate how well and at what state your cable modem gateway is operating. See
DPR2325 and EPR2325 Front Panel LED Status Indicator Functions (on page 124)
for more information on front panel LED status indicator functions.
68-4004214-01 Rev D
POWER—Illuminates solid green to indicate that
1
power is being applied to the cable modem gateway
RECEIVE DATA—Blinks to indicate that the cable
2
modem gateway is receiving data from the cable
network
3
SEND DATA—Blinks to indicate that the cable
modem gateway is sending data to the cable network
CABLE—Illuminates solid green when the cable
4
modem gateway is registered on the network and
fully operational. This indicator blinks to indicate one
of the following conditions:
- The cable modem gateway is booting up and not
ready for data
- The cable modem gateway is scanning the
network and attempting to register
- The cable modem gateway has lost registration
on the network and will continue blinking until it
registers again
5
ETHERNET (1-4)—Illuminates solid green to
indicate that an Ethernet carrier is present and blinks
to indicate that Ethernet data is being transferred
between the PC and the cable modem gateway
USB—Illuminates solid green to indicate that a USB
6
carrier is present and blinks to indicate that data is
being transferred on a USB connection to the cable
modem gateway
7
Wireless—Illuminates solid green to indicate that a
wireless access point is enabled and blinks to indicate
that wireless data is being transferred over the
wireless connection
Note: After the cable modem gateway is successfully
registered on the network, the POWER (LED 1) and
CABLE (LED 4) indicators illuminate continuously to
indicate that the cable modem gateway is online and
fully operational.
Cable Modem Gateway Components
5
Advertisement
Table of Contents
Troubleshooting
