Advertisement
MEX-N4000BT
Location of controls and basic operations
Main unit
CD/USB:
(browse)
Skip a track (press); skip tracks continuously
Enter the Quick-BrowZer™ mode.
(You can search for a track in a CD, USB or
(press, then press again within about 2
seconds and hold); reverse/fast-forward a
BT audio device*
1
easily by category.)
track (press and hold).
1
Press
(browse)*
2
to display the list of
search categories.
BLUETOOTH Audio*
3
:
Skip a track (press); reverse/fast-forward a
When the track list appears, press
track (press and hold).
(back) repeatedly to display the desired
search category.
App Remote*
4
:
Skip a track (press).
2
Rotate the control dial to select the
desired search category, then press it to
Control dial
confirm.
Rotate to adjust the volume.
3
Repeat step 2 to search the desired
ENTER
track.
Enter the selected item.
Playback starts.
Press SRC, rotate then press to change the
source.
To exit the Quick-BrowZer mode, press
(browse).
VOICE
Activate voice dial.
Front panel release button
When the App Remote function is on, the
SEEK +/–
voice recognition is activated (Android™
/ (prev/next)
phone only).
/ (fast-reverse/fast-forward)
APP
Press and hold for more than 2 seconds to
Radio:
establish App Remote function (connection).
Tune in stations automatically (press); find a
station manually (press and hold).
N-Mark
Touch the control dial with Android phone
to make BLUETOOTH connection.
©2014 Sony Corporation
Receptor for the remote commander
CD/USB:
1/2: ALBUM / (during MP3/WMA/WAV*
6
Disc slot
playback)
Display window
Skip an album (press); skip albums
(disc eject)
continuously (press and hold).
3:
(repeat)*
7
SRC (source)*
5
Press to turn on the power; select the
4:
(shuffle)
source (Radio/CD/USB/AUX/BLUETOOTH
6: PAUSE
audio/BLUETOOTH phone).
Pause playback. Press again to resume
OFF
playback.
Press and hold for 1 second to turn off the
BLUETOOTH Audio*
3
:
power.
1/2: ALBUM /
Press and hold for more than 2 seconds to
turn off the power and the display
3:
(repeat)*
7
disappears.
4:
(shuffle)
(back)
6: PAUSE
Return to the previous display.
Pause playback. Press again to resume
playback.
MODE
Press to select the radio band (FM1, FM2,
BLUETOOTH phone:
FM3, MW or LW).
Call a stored phone number (press); store a
Press and hold to enter/cancel the
phone number as a preset (press and hold)
passenger control (iPod).
(in the call menu).
Press to activate/deactivate the appropriate
5: MIC (during a call)
device (this unit/cellular phone)
Set the MIC gain (press); select Echo
(BLUETOOTH phone).
Canceler/Noise Canceler mode (press and
CALL
hold).
Enter the call menu. Receive/end a call.
App Remote*
4
:
Press and hold more than 2 seconds to
PAUSE
switch the BLUETOOTH signal.
Pause playback. Press again to resume
MENU
playback.
Open the setup menu.
AF (alternative frequencies)/TA (traffic
DSPL (display)
announcement)
Press and hold, then press to change
Set AF and TA.
display items.
PTY (program type)
Number buttons (1 to 6)
Press and hold to select PTY in RDS.
Radio:
AUX input jack
Receive stored stations (press); store
USB port
stations (press and hold).
Microphone (on inner panel)
In order for the handsfree function to work
properly, do not cover the microphone with
tape, etc.
Detaching the front panel
You can detach the front panel of this unit to
*
1
Available only for audio devices supporting AVRCP
prevent theft.
(Audio Video Remote Control Profile) 1.4 or above.
*
2
During USB playback, press
(browse) for more
1
Press and hold OFF .
than 2 seconds to directly return to the beginning of
The unit is turned off.
the category list.
*
3
When a BLUETOOTH audio device (supports AVRCP
2
Press the front panel release button ,
of BLUETOOTH technology) is connected. Depending
then remove the panel by pulling it
on the device, certain operations may not be
available.
towards you.
*
4
When App Remote is established with iPhone/
Android phone. Depending on the application,
certain operations may not be available.
*
5
If App Remote is established with iPhone/Android
phone, the application name appears on the display
when selecting the source.
*
6
Available only for USB playback.
*
7
This button has a tactile dot.
Caution alarm
For details on BLUETOOTH operations, see
If you turn the ignition switch to the OFF
the supplied "Operating Instructions."
position without detaching the front panel, the
caution alarm will sound for a few seconds. The
Warning if your car's ignition has no ACC
alarm will only sound if the built-in amplifier is
position
used.
Be sure to set the AUTO OFF function. The
Serial numbers
unit will shut off completely and
automatically in the set time after the unit is
Make sure the serial numbers on the bottom of
turned off, which prevents battery drain. If
the unit and the back of the front panel are
you do not set the AUTO OFF function, press
matched correctly. Otherwise you cannot make
and hold OFF until the display disappears
BLUETOOTH pairing, connection and
each time you turn the ignition off.
disconnection by NFC.
Attaching the front panel
Engage part of the front panel with part of
the unit, as illustrated, and push the left side
into position until it clicks.
Connecting with a BLUETOOTH device / Connecting with a Smartphone by One touch (NFC) /
Operating the BLUETOOTH functions / Adjusting the sound characteristics /
Adjusting setup items
SET UP
USB
iPod
Setting the clock
Playing back an iPod/USB
device
The clock uses a 24-hour digital indication.
1
Press MENU, rotate the control dial to
1
Open the USB cover, then connect an iPod/
select [GENERAL], then press it.
USB device to the USB port.*
2
Rotate the control dial to select [CLOCK-
* To connect an iPod/iPhone, use the USB
ADJ], then press it.
connection cable for iPod (not supplied).
The hour indication flashes.
3
Rotate the control dial to set the hour and
minute.
To move the digital indication, press SEEK
+/–.
4
After setting the minute, press MENU.
The setup is complete and the clock starts.
To display the clock
Playback starts.
Press DSPL.
If a device is already connected, to start
Tip
playback, press SRC to select [USB] ([IPD]
You can set the clock automatically with the RDS
appears in the display when the iPod is
feature. For details, see "Adjusting setup items" on the
recognized).
reverse side of the sheet, and set to [CT-ON] (clock
time).
2
Adjust the volume on this unit.
To stop playback
RADIO
Press and hold OFF for 1 second.
Storing stations automatically
To remove the device
Stop playback, then remove the device.
Caution
When tuning in stations while driving, use Best
Caution for iPhone
Tuning Memory (BTM) to prevent an accident.
When you connect an iPhone via USB, phone
call volume is controlled by the iPhone, not the
1
Press SRC repeatedly to select [TUNER].
unit. Do not inadvertently increase the volume
To change the band, press MODE repeatedly.
on the unit during a call, as sudden loud sound
2
may result when the call ends.
Press MENU, rotate the control dial to
select [GENERAL], then press it.
3
Rotate the control dial to select [BTM], then
press it.
The unit stores stations in order of frequency
on the number buttons.
CD
USB
iPod
5
If passkey* input is required on the
Playing tracks in various modes
BLUETOOTH device, input [0000].
Available play modes differ depending on the
* Passkey may be called "Passcode," "PIN code,"
"PIN number" or "Password," etc., depending on
selected sound source.
the device.
1
During playback, press
(repeat) or
(shuffle) repeatedly to select the desired
play mode.
Input passkey
Playback in selected play mode may take
time to start.
[0000]
BLUETOOTH
When pairing is made,
stays lit.
Pairing and connecting with a
6
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
BLUETOOTH device
or
lights up when the connection is
made.
When connecting a BLUETOOTH device (cellular
phone, audio device, etc.) for the first time,
Note
mutual registration (called "pairing") is required.
While connecting to a BLUETOOTH device, this unit
Pairing enables this unit and other devices to
cannot be detected from another device. To enable
recognize each other.
detection, enter the pairing mode and search for this
unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode after
this unit and the BLUETOOTH device are paired.
1
Place the BLUETOOTH device within 1 m of
this unit.
2
Press CALL, rotate the control dial to select
[PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH device
so it detects this unit.
4
Select [Sony Car Audio] shown in the
display of the BLUETOOTH device.
If [Sony Car Audio] does not appear, repeat
from step 2.
Advertisement
Related Manuals for Sony MEX-N4000BT
Summary of Contents for Sony MEX-N4000BT
- Page 1 BLUETOOTH device. (browse). VOICE Press and hold, then press to change Set AF and TA. If [Sony Car Audio] does not appear, repeat Rotate the control dial to select [BTM], then Activate voice dial. Front panel release button display items.
-
Page 2: Adjusting Setup Items
Selects the subwoofer mode: [1], [2], [3], [OFF]. this unit functions.” For details, refer to the operating instructions REDIAL NORMAL (): Normal with the Sony recommended sound settings: CAUT ALM* (caution alarm) SW PHASE (subwoofer phase) Activate the BLUETOOTH function on the Note Makes a call again to the last phone number FAR (): Far...