Clear Interface Gigabitethernet - Cisco Catalyst 4500 Series Command Reference Manual
Cisco ios command reference
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
clear interface gigabitethernet
clear interface gigabitethernet
To clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface, use the clear interface
gigabitethernet command.
This command does not increment interface resets as displayed with the show interface
Note
gigabitethernet mod/port command.
Syntax Description
mod/port
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
Examples
This example shows how to clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface:
Switch# clear interface gigabitethernet 1/1
Switch#
Related Commands
Command
show interfaces status
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-102
clear interface gigabitethernet mod/port
Number of the module and port.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays the interface status.
OL-25342 -01
Advertisement
Chapters
Table of Contents
