Static Ip Address - D-Link GO-RT-N150 User Manual

Wireless n 150 easy router

Table of Contents

Section 3 - Configuration

Choose Static IP Address if all Internet ports' IP information is provided to you by your ISP. You will need to enter in the IP

address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields

must be in the appropriate IP format, which is four octets each separated by a dot (x.x.x.x). The router will not accept the IP

address if it is not in this format.

IP Address:

Enter the IP address assigned by your ISP.

Subnet Mask:

Enter the Subnet Mask assigned by your ISP.

Default Gateway:

Enter the Gateway assigned by your ISP.

DNS Servers:

The DNS server information will be supplied by

your ISP (Internet Service Provider.)

MTU:

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with

your specific ISP. 1500 is the default MTU.

MAC Address:

The default MAC Address is set to the Internet

port's physical interface MAC address on the

router. It is not recommended that you change

the default MAC address unless required to by

your ISP. You can use the Clone Your PC's MAC

Address button to replace the Internet port's MAC

address with the MAC address of your Ethernet

card.

D-Link GO-RT-N150 User Manual

Static IP Address

Table of Contents

Show Quick Links

Table of Contents