Table of Contents
Advertisement
Gauges
Water temperature gauge- indicates coolant
temperature and warns of overheat situation.
Ammeter - indicates amount of electrical flow
at the battery. Under normal operating
conditions the needle will be slightly on the
plus (+) side of the gauge, showing that
current is being supplied to the battery. At idle
speed, the indicator may be at zero or on the
negative (-) side. A continuous negative
reading at normal operating speed indicates
a malfunction in the charging system that
should be checked immediately.
Oil pressure meter - tells what the pressure is
in the oil system and warns if pressure is too
low for operation.
Throttle Control
The throttle control regulates the engine
speed.
In order to increase or decrease the engine
speed, the control is moved forward or
backward respectively.
Avoid idling the engine for long periods.
Use full throttle when mowing.
Ignition
The ignition key is placed in the front console
and is used to start the machine.
IMPORTANT INFORMATION
Wait till the glow plug light goes out before
turning the engine over. To prolong starter
life use short starting cycles, DO NOT
exceed 30 secs./min.
Hour Meter
The hour meter displays the total operating
time and reminds of service intervals.
Meter will indicate "CHG OIL" for engine oil
and "SVC" for general service at preset
intervals.
Service alerts will re-set after serveral hours.
CONTROLS
WATER TEMPERATURE
Gauges
Throttle control
GLOW PLUG LIGHT
Console
AMMETER
OIL PRESSURE
THROTTLE CONTROL
HOUR METER
IGNITION
BAM-2
BAM-2
BAM-3
13
- Quick Links:
- Engine
Hide quick links:
Advertisement
Table of Contents
