Table of Contents
Advertisement
Quick Links
Quick Installation Guide
Check Your Package Contents
DVG-N5402SP
VoIP Router
User Manual can be found at http://www.dlink.com.sg/support/
DVG-N5402SP
VoIP Router
Ether (CAT5 UTP)
Cable
12VDC, 2A
Adapter
adapter with a
different voltage rating
will damage this
product and void the
warranty.
1
Power
Using a power
Advertisement
Table of Contents
Related Manuals for D-Link 515337
Summary of Contents for D-Link 515337
- Page 1 Quick Installation Guide DVG-N5402SP VoIP Router Check Your Package Contents DVG-N5402SP Ether (CAT5 UTP) 12VDC, 2A Power VoIP Router Adapter Cable Using a power adapter with a different voltage rating will damage this product and void the warranty. User Manual can be found at http://www.dlink.com.sg/support/...
-
Page 2: Front Panel
Hardware Overview Front Panel Power: A steady green light indicates a proper connection to a power source. A red light indicates the power-on self test fails or the device is malfunction. Prov/Alm: A blinking light indicates the VoIP Router can not register with SIP Server or can not get the IP address. - Page 3 up when a cable is connected, verify the cable connections and ensure that your devices are powered on. LAN: When a connection is established the LED will light up solid on the appropriate port. The LEDs will blink to indicate the activity. If the LED does not light up when a cable is connected, verify the cable connections and ensure that your devices are powered on.
-
Page 4: Rear Panel
Hardware Overview (continued) Rear Panel Antenna: Connect to a wireless network. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). USB: USB host 2.0 port, for connecting to another USB device to supply some value-added application. LAN: Connect to your Ethernet enabled computers using Ethernet cabling. -
Page 5: Installing The Hardware
Installing the Hardware A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the DVG-N5402SP and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer. B. - Page 6 Installing the Hardware (continued) D. Connect the power adapter to the power input at the back panel of the DVG-N5402SP and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn On to indicate proper operation.
- Page 7 Installing the Hardware (continued) After the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your VoIP service is already activated, you can make phone calls now.
- Page 8 Configuration To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-N5402SP. Open your Web browser and type http://192.168.0.1 into the URL address box. Press the Enter or Return Key. Click Login to enter Web Site.
- Page 9 Configuration (continued) The username of ADMIN and USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click Apply. By Default, the wireless SSID will be “DVG-N5402SP-XXXXXX” And “XXXXXX” will be the last 6 digits of your MAC address located below the device.
- Page 10 Configuration (continued) Enter the SSID to name your own wireless network. All devices must have the same SSID to communicate on the wireless network. Select a wireless channel. Select the 802.11 Mode of your network which can work in different speed of wireless connection.
-
Page 11: Technical Support
Technical Support You can find software updates and user documentation/manual on the D-Link website. Tech Support for customers within Singapore: D-Link Technical Support over the Telephone: Service Centre Hotline: (65) 6774 6233 [Press 1] 24x7 Technical Support Hotline: (65) 6501 4200 D-Link Technical Support over the Internet: www.dlink.com.sg/support/ email:support@dlink.com.sg...