Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZBA7224A
Summary of Contents for Zanussi ZBA7224A
- Page 1 User manual Refrigerator ZBA7224A...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if…... - Page 3 or damaged power plug may overheat and cause a • Unpack the appliance and check if there are damages fire. on it. Do not connect the appliance if it is damaged. 3. Make sure that you can come to the mains plug of Report possible damages immediately to the place you the appliance.
-
Page 4: Operation
Operation Switching on A medium setting is generally the most suitable. Insert the plug into the wall socket. However, the exact setting should be chosen keeping in Turn the Temperature regulator clockwise to a medium mind that the temperature inside the appliance depends setting. -
Page 5: Helpful Hints And Tips
Movable shelves Positioning the door shelves The walls of the refrigera- To permit storage of food tor are equipped with a packages of various sizes, series of runners so that the door shelves can be the shelves can be posi- placed at different heights. -
Page 6: Care And Cleaning
• it is advisable to show the freezing in date on each in- • be sure that frozen foodstuffs are transferred from the dividual pack to enable you to keep tab of the storage foodstore to the freezer in the shortest possible time; time. -
Page 7: What To Do If
7. Reload the previously removed food into the compart- • disconnect the appliance from electricity supply ment. • remove all food • defrost Important! Never use sharp metal tools to scrape off frost and clean the appliance and all accessories from the evaporator as you could damage it. - Page 8 Problem Possible cause Solution Products prevent that water flows into Make sure that products do not touch the water collector. the rear plate. Water flows on the ground. The melting water outlet does not flow Attach the melting water outlet to the in the evaporative tray above the com- evaporative tray.
-
Page 9: Technical Data
Technical data Dimension of the recess Height 1225 mm Width 560 mm Depth 550 mm Rising Time 12 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. - Page 10 Door reversibility The door of the appliance On the opposite side: opens to the right. If you • Install the lower pin. want to open the door to • Install the door. the left, do these steps be- • Tighten the spacer and fore you install the appli- tighten the upper pin.
- Page 11 44mm Install the appliance in the Adjust the appliance in the Attach the appliance to the If necessary cut the adhe- sive sealing strip and then niche. niche. niche with 4 screws. Push the appliance in the Make sure that the distance apply it to the appliance as shown in figure.
- Page 12 8 mm 8 mm Push the part (Hc) on the Open the appliance door Remove the brackets and Place the small square on part (Ha). and the kitchen furniture mark a distance of 8 mm the guide again and fix it door at an angle of 90°.
-
Page 13: Environmental Concerns
Reversibility of the freezer door 180˚ Environmental concerns negative consequences for the environment and human The symbol on the product or on its packaging health, which could otherwise be caused by inappropriate indicates that this product may not be treated as waste handling of this product. - Page 16 www.zanussi.com/shop...