Appendix; Connector And Cable Specifications; Connector Specifications; 10/100/1000 Ports - Cisco Catalyst 2960 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Connector and Cable Specifications
This appendix describes the Catalyst 2960 switch ports and the cables and adapters that you use to
connect the switch to other devices and includes these sections:
•
•
Connector Specifications
These sections describe the connectors used with the Catalyst 2960 switch:
•
•
•
•
10/100/1000 Ports
The 10/100/1000 Ethernet ports on the Catalyst 2960 switch use standard RJ-45 connectors.
The auto-MDIX feature is enabled by default. For configuration information for this feature, see the
Note
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices
When connecting the ports to 10BASE-T- and 100BASE-TX-compatible devices, such as servers,
workstations, and routers, you can use a two or four twisted-pair, straight-through cable wired for
10BASE-T and 100BASE-TX.
schematics.
OL-7075-05
Connector Specifications, page A-1
Cable and Adapter Specifications, page A-4
10/100/1000 Ports, page A-1
SFP Module Ports, page A-3
Dual-Purpose Ports, page A-3
Console Port, page A-4
Figure A-7
shows the four twisted-pair, straight-through cable schematics.
A P P E N D I X
Figure A-5
shows the two twisted-pair, straight-through cable
Catalyst 2960 Switch Hardware Installation Guide
A
Figure A-1
A-1
Advertisement
Table of Contents
