Advanced Hybrid & Wireless PBX Feature Guide KX-TAW848 Model No. Thank you for purchasing a Panasonic Advanced Hybrid & Wireless PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TAW848: MPR Version 2.0...
Page 2
About the Feature Guide The Feature Guide is designed to serve as an overall reference describing the features of the Panasonic Advanced Hybrid & Wireless PBX. It explains what the PBX can do, as well as how to obtain the most of its many features and facilities.
Portable Station (PS) Features A Panasonic PS can be used in place of a PT to provide wireless access to PBX features and call handling. When in Wireless XDP Parallel Mode, a PS can share an extension number with a wired telephone, allowing extension users to use their PSs when they are away from their desks to answer or make calls as if they were using their wired telephones.
List of Abbreviations Automated Attendant Analog Proprietary Telephone Automatic Route Selection Background Music Calling Line Identification Class of Service Calling Party Control Cell Station Direct In Line DISA Direct Inward System Access Do Not Disturb Digital Proprietary Telephone Direct Station Selection DTMF Dual Tone Multi-Frequency External Feature Access...
Page 5
Voice Mail Voice Processing System eXtra Device Port Feature Guide...
Table of Contents Call Handling Features................. 13 Incoming Call Features....................14 1.1.1 Incoming CO Line Call Features ..................14 1.1.1.1 Incoming CO Line Call Features—OVERVIEW....................14 1.1.1.2 Direct In Line (DIL) ............................16 1.1.1.3 Calling Line Identification (CLI) Distribution..................... 17 1.1.1.4 Intercept Routing ............................. 18 1.1.1.5 Intercept Routing—No Destination ........................
Page 7
1.6.1 Memory Dialing Features....................61 1.6.1.1 Memory Dialing Features—OVERVIEW ......................61 1.6.1.2 One-touch Dialing ............................62 1.6.1.3 Last Number Redial ............................63 1.6.1.4 Speed Dialing—Personal/System ........................63 1.6.1.5 Quick Dialing ..............................64 1.6.1.6 Hot Line................................65 Busy Line/Busy Party Features ..................66 1.7.1 Automatic Callback Busy (Camp-on) ................66 1.7.2 Executive Busy Override....................
Page 8
1.15.7 Automatic Fax Transfer....................112 1.15.8 External Sensor ......................113 1.15.9 External Relay Control ....................114 1.16 Caller ID Features......................116 1.16.1 Caller ID ......................... 116 1.16.2 Incoming Call Log ......................120 1.17 Message Features ......................122 1.17.1 Message Waiting......................122 1.17.2 Absent Message ......................
Page 10
Tool ..........................245 4.4.1 Tool—SD memory backup ..................... 245 4.4.2 Tool—Extension List View ....................245 4.4.3 Tool—Import........................245 4.4.4 Tool—Export ........................247 4.4.5 Tool—System data Convert ................... 247 Utility ..........................249 4.5.1 Utility—Diagnosis ......................249 4.5.2 Utility—File Transfer PC to PBX (SD Card)..............250 4.5.3 Utility—File Transfer PBX (SD Card) to PC..............
Page 11
4.8.17 Ring Tone Patterns—Call from CO [2-8-1]..............361 4.8.18 Ring Tone Patterns—Call from Doorphone [2-8-2] ............362 4.8.19 Ring Tone Patterns—Call from Others [2-8-3] ............... 362 4.8.20 System Options—Option 1 [2-9-1] ................. 364 4.8.21 System Options—Option 2 [2-9-2] ................. 367 4.8.22 System Options—Option 3 [2-9-3] .................
1.1 Incoming Call Features Incoming Call Features 1.1.1 Incoming CO Line Call Features 1.1.1.1 Incoming CO Line Call Features—OVERVIEW Description CO lines are used to connect a PBX to a public network, i.e., the telephone company. Distribution Method Each CO line port uses a method of distributing calls to their destinations as they are received. Distribution Method Description Details in...
Page 15
1.1 Incoming Call Features Type Description Details in No Answer (IRNA) If a called party does not answer a call within a • 1.1.1.4 Intercept preprogrammed time period (Intercept time), the call Routing is redirected to a preprogrammed destination. Busy If a called party is already handling another call, the new call is redirected to a preprogrammed destination.
1.1 Incoming Call Features 1.1.1.2 Direct In Line (DIL) Description Directs an incoming CO line call to a preprogrammed destination based on the CO line carrying the call. Each CO line has a destination for each time mode. [Method Flowchart] A CO line call is received.
1.1 Incoming Call Features if assigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101. In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100. Note Tenant numbers and VPS trunk (CO line) group numbers (not shown here) can also be programmed in the DIL Table.
1.1 Incoming Call Features In this example: If the caller's telephone number is "1-212-555-1234": The PBX looks for the number in the System Speed Dialing Table. (The CO Line Access number, "9", is disregarded.) The number is found in location 000. If CLI distribution is enabled in the current time mode for the CO line carrying the call (for DIL distribution), the call is routed to its CLI destination, extension 200.
Page 19
1.1 Incoming Call Features When the original destination is: The Available Intercept Destination is: • PS Ring Group The destination assigned to the CO line group carrying the call (→ CO Line Group Intercept • VM Group (DTMF/DPT) Destination [470]) •...
1.1 Incoming Call Features • If the intercept destination can, but does not, answer the call: The call continues to ring at the intercept destination until answered. • Intercept Routing—Busy/DND on/off Intercept Routing—Busy and Intercept Routing—DND can each be enabled or disabled for the entire system, through system programming.
1.1 Incoming Call Features [Available Destination] The following destinations can be called internally. When calling from Destination Extension Doorphone Wired Extension (PT/SLT) ICD Group PS Ring Group VM Group (DTMF/DPT) External Pager (TAFAS) DISA Analog Remote Maintenance Idle Line Access no. + Phone no. CO Line Group Access no.
1.1 Incoming Call Features COS 1 Extn. 100 Extn. 101 COS 2 COS 3 Extn. 102 Extn. 103 Extn. 104 Extn. 105 Extn. 106 Conditions • Internal Call Block also prohibits certain features, such as Walking Extension and Walking COS, from being performed between certain extensions.
1.1 Incoming Call Features Indication Type Feature Description Details in Display (Caller Display A user's PT can show a variety of information • 1.18.4 Display Information) Information on the display, such as the line number, the Information caller's name and number, the original destination if the call was forwarded, etc.
1.1 Incoming Call Features 1.1.3.3 Call Waiting Description A busy extension user can be alerted to a new call by a tone heard through the handset or built-in speaker. The busy extension user can then answer the second call either by disconnecting the current call or placing it on hold.
1.2 Receiving Group Features Receiving Group Features 1.2.1 Idle Extension Hunting Description If a called extension is busy or in Do Not Disturb (DND) mode, Idle Extension Hunting redirects the call to an idle member of the same idle extension hunting group, which can be programmed through system programming (→...
1.2 Receiving Group Features [Available Destination] The following can be used as overflow destinations assigned to an idle extension hunting group. Destination Availability Wired Extension (PT/SLT) ICD Group PS Ring Group VM Group (DTMF/DPT) External Pager (TAFAS) DISA Analog Remote Maintenance Idle Line Access no.
Page 27
1.2 Receiving Group Features [Programming Example: ICD Group] Max. No. of Queuing Overflow Destination Group Floating Group Distribution Hurry-up Overflow Tenant Busy Extensions Call Extn. No. Name Method Level Time (No. of Agents) Capacity Lunch Break Night Sales Ring Max. Engineering →...
Page 28
1.2 Receiving Group Features [Example of ICD Group 1 (Above)] A through F below indicate settings shown above in "Programming Example: ICD Group". The numbers found in circles below indicate calls and the order in which they arrived. Calls arrive at ICD group 1. Overflow Feature Redirects to the overflow destination.
Page 29
1.2 Receiving Group Features VIP Call [→ 1.2.2.4 VIP Call] ICD groups can be assigned a priority, allowing calls in higher-priority groups to be answered before calls in lower-priority groups. Overflow Feature [→ 1.2.2.5 Overflow Feature] When calls cannot be answered or queued, they can be redirected to a preprogrammed destination via ICD Group Overflow.
1.2 Receiving Group Features 1.2.2.2 Group Call Distribution Description Each incoming call distribution (ICD) group has a specified number of extensions which can handle calls at the same time. (→ Maximum Number of Agents [632]) This allows you to devote some of your staff to answering calls (call agents) while others carry on with their work.
Page 31
1.2 Receiving Group Features Distribution Method Description Ring All extensions in the group ring simultaneously. Delayed Ringing Each extension can be programmed for Delayed Ringing (→ ICD Group Delayed Ringing [621]), which allows extensions to be alerted to calls by flashing buttons only.
1.2 Receiving Group Features [G-DN Button for Group Call Waiting] Group Call Waiting works differently depending on the assigned Group Call Waiting Distribution method, as follows: Ring: All busy extensions hear a call waiting tone simultaneously for the first incoming call, even if they do not have a Group Directory Number (G-DN) button.
Page 33
1.2 Receiving Group Features will be directed to the group's overflow destination (→ 1.2.2.5 Overflow Feature). While calls are waiting in the queue, the calls are handled according to a Queuing Time Table (→ Queuing Time Table [630]), which can be assigned for each time mode (→ 2.2.4 Time Service). Each Queuing Time Table consists of up to 16 sequences.
Page 34
We are sorry to Thank you for overflow 30 seconds. the overflow keep you holding. calling Panasonic. destination. destination. All of our agents are All of our agents are still handling currently handling other calls. We other calls.
1.2 Receiving Group Features 1.2.2.4 VIP Call Description Incoming call distribution (ICD) group can be assigned a priority, allowing calls in higher-priority groups (VIP calls) to be answered before calls in lower-priority groups. To use VIP Call mode, it must first be enabled for at least one ICD group. Once it has been enabled, the priority of each group's calls is determined by its group number (lower-numbered groups have higher priority) and this priority affects which calls get directed to agents first.
1.2 Receiving Group Features Conditions • Group Call Waiting (→ 1.2.2.2 Group Call Distribution) cannot be used simultaneously with VIP Call. Even if VIP Call mode is enabled, it will not function when group extensions have turned on Call Waiting. Call Waiting must be turned off on all member extensions in order for VIP Call to function.
1.2 Receiving Group Features Destination Availability Idle Line Access no. + Phone no. CO Line Group Access no. + CO Line Group no. + Phone no. Conditions • If the Overflow time expires, and the overflow destination is unavailable: The line is disconnected either when the caller has already heard an outgoing message (OGM) while waiting in a queue, or when the call reached an ICD group using Direct Inward System Access (DISA) (→...
Page 38
1.2 Receiving Group Features Conditions • It is programmable whether the last remaining logged-in extension can log out. • Log-in/Log-out Button Any flexible button can be customized as a Log-in/Log-out button. Three types of buttons can be programmed, as explained below. Light Pattern Log-in/Log-out Usage...
Page 39
1.2 Receiving Group Features • Log-in/Log-out Information on SMDR Log-in/Log-out information can be logged by Station Message Detail Recording (SMDR). (→ 1.21.1 Station Message Detail Recording (SMDR)) Feature Guide References 1.18.2 Flexible Buttons 1.2.2.2 Group Call Distribution User Manual References 1.8.1 Log-in/Log-out, Wrap-up Feature Guide...
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features Call Forwarding (FWD)/Do Not Disturb (DND) Features 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND) 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Description When an extension user cannot answer calls (on a call, out of the office, etc.), it is possible to forward or refuse the calls using the following features: Call Forwarding (FWD) Do Not Disturb (DND)
Page 41
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features [Button Status—FWD/DND Button] A FWD/DND button shows the current status as follows: Light Pattern Status (default) Red on DND on Slow red flashing FWD on FWD/DND off The status indicated by the "on" and "flashing" patterns can be changed through system programming. [Button Status—Group FWD Button] A Group FWD button shows the current status as follows: Light Pattern...
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features Feature Guide References 1.18.1 Fixed Buttons 1.18.2 Flexible Buttons User Manual References 3.1.2 Settings on the Programming Mode 1.3.1.2 Call Forwarding (FWD) Description Extensions and incoming call distribution (ICD) groups can forward their calls to preset destinations. There are four Call Forwarding (FWD) modes, described below.
Page 43
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features Extension Forwards to Incoming Another Extension Intercom Calls Incoming CO Forwards to Line Calls Outside Party Available Forwarding Type: All Calls Busy No Answer Busy/No Answer ICD Group Incoming Forwards to Intercom Calls Another Extension Incoming CO Forwards to...
Page 44
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features Conditions [General] • FWD for CO Line Calls/Intercom Calls The FWD feature can be set for CO line calls, for intercom calls, or for both of them by the extension user. • FWD from ICD Group (Group FWD) COS programming determines the ICD groups that can use this feature.
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features • Boss & Secretary feature It is possible to call the original extension from the destination extension regardless of the forward setting. FWD—All Calls Incoming call Call or transfer a call Boss Secretary (Original) (FWD destination)
Page 46
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features destination cannot be found, the calling extension will hear the DND tone, while the calling outside party will hear a busy tone. Conditions • DND for CO Line Calls/Intercom Calls The DND feature can be set for CO line calls, for intercom calls, or for both of them by the extension user.
1.4 Answering Features Answering Features 1.4.1 Answering Features 1.4.1.1 Answering Features—OVERVIEW Description An extension user can answer incoming calls by the following methods: Called Feature Description Details in Extension The user's own Line The user can select the line seized when going •...
1.4 Answering Features Conditions [Prime Line] • The priority of the incoming call is as follows: The call arriving at a button on which the "Prime Line" is assigned. The call arriving at the INTERCOM button. User Manual References 3.1.2 Settings on the Programming Mode 1.4.1.3 Call Pickup Description...
1.5 Making Call Features Making Call Features 1.5.1 Predialing Description A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call will be initiated after going off-hook. Conditions • Storing the Predialed Number in Personal Speed Dialing The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE button.
1.5 Making Call Features 1.5.3 Intercom Call Description An extension user can call another extension user. Conditions • Extension Number/Name Assignment Extension numbers (→ Extension Number [003]) and names (→ Extension Name [004]) are assigned to all extensions. The assigned number and name of the other extension are shown on display PTs during intercom calls.
1.5 Making Call Features 1.5.4 CO Line Call Features 1.5.4.1 CO Line Call Features—OVERVIEW Description An extension user can use the following features when making a CO line call: Feature Description Details in Emergency Call A user can dial preprogrammed emergency numbers •...
1.5 Making Call Features There are two methods of entering account codes explained below. One of the methods is selected for each extension based on Class of Service (COS) programming (→ Account Code Mode [508]). Mode Description Option An extension user can enter an account code, but is not required to. An extension user must always enter an account code before seizing a CO Forced line.
1.5 Making Call Features Conditions • Pulse to Tone Conversion It is possible for an extension user to temporarily switch from Pulse mode to DTMF mode in order to access special services such as computer-accessed long distance calling or voice mail services. To switch to DTMF mode, wait for a preprogrammed time period (Default: 5 seconds) after the CO line is connected, or press .
Page 56
1.5 Making Call Features [Example] Telephone Company Host PBX Access Code: 0 Host PBX Outside Party (01-23-4567) Idle Line Access No.: 9 Extn. 101 Extn. 102 Dials "0-01-23-4567". TRG1 Host PBX Access Code Telephone Dials "9-0-01-23-4567". Dials "9-101". Idle Line Idle Line Telephone No.
1.5 Making Call Features 1.5.4.7 Special Carrier Access Code Description If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through system programming (→ Special Carrier Access Code [303]) is required every time a CO line call is made. A pause of a preprogrammed length (→...
1.5 Making Call Features Method Description Idle Line When an extension user goes off-hook, an idle CO line is selected automatically from the assigned CO line groups. No Line When an extension user goes off-hook, no line is selected. In order to make a call, the user must select the desired line manually.
Page 59
1.5 Making Call Features Method Description Operation S-CO Line Access Selects the desired CO line directly. Dial the S-CO Line Access number and the CO line number, or press the S-CO button. Conditions • Class of Service (COS) programming determines the CO line groups available for making calls (→ CO Line Group Number [500]).
Page 60
1.5 Making Call Features User Manual References 1.2.1 Basic Calling Feature Guide...
1.6 Memory Dialing Features Memory Dialing Features 1.6.1 Memory Dialing Features 1.6.1.1 Memory Dialing Features—OVERVIEW Description An extension user can store frequently dialed numbers in the PBX. A stored number is dialed automatically with a simple operation. Features Feature Storing Method Details in One-touch Dialing •...
1.6 Memory Dialing Features Displayed while Input Description Entering FLASH/RECALL Store a flash/recall signal (EFA mode) by pressing the FLASH/ (Hooking)* RECALL button at the beginning of the number. (→ 1.10.6 External Feature Access (EFA)) INTERCOM Conceal all or part of the number by pressing the INTERCOM (Secret)* button at the beginning and at the end of the number to be concealed.
1.6 Memory Dialing Features Feature Guide References 1.18.2 Flexible Buttons User Manual References 1.2.2 Easy Dialing 1.6.1.3 Last Number Redial Description Every extension automatically saves the last external telephone number dialed, allowing the same number to be dialed again. Outgoing Call Log The last five (default) dialed numbers are automatically stored at each portable station (PS).
1.6 Memory Dialing Features • Call Directory—Speed Dialing A KX-T7735 analog proprietary telephone (APT) users can make a call by selecting a stored name shown on the display. [Personal Speed Dialing] • Personal Speed Dialing Display Lock An extension user can lock his or her Personal Speed Dialing display to prevent others from viewing it. In this case, the Incoming Call Log information displays are also locked.
1.6 Memory Dialing Features User Manual References 1.2.2 Easy Dialing 1.6.1.6 Hot Line Description An extension user can make an outgoing call by simply going off-hook, if the user has previously stored the telephone number or the extension number. If the Hot Line feature is set and the user goes off-hook, a dial tone is generated for a specified time assigned through system programming (→...
1.7 Busy Line/Busy Party Features Busy Line/Busy Party Features 1.7.1 Automatic Callback Busy (Camp-on) Description If the line is busy when a call is made, a callback ring can inform the caller when the line becomes free. If the called party was another extension, or if the dialed number is handled by Automatic Route Selection (ARS), the number is automatically redialed after the extension user answers the callback ring.
1.7 Busy Line/Busy Party Features Has a call on a consultation hold (→ 1.12.5 Consultation Hold). • This feature is not available for a CO-to-CO line call via Direct Inward System Access (DISA) (→ 1.15.6 Direct Inward System Access (DISA)). User Manual References 1.2.4 When the Dialed Line is Busy or There is No Answer 1.7.4 Executive Busy Override Deny...
1.7 Busy Line/Busy Party Features 1.7.4 Call Waiting Tone Description When attempting to call a busy extension (i.e., an extension that is ringing or having a conversation), an extension user can send a call waiting tone to the busy extension. Conditions •...
1.8 Toll Restriction (TRS) Features Toll Restriction (TRS) Features 1.8.1 Toll Restriction (TRS) Description Toll Restriction (TRS) can prohibit extension users from making certain CO line calls, based on the Class of Service (COS) assigned to them (→ Class of Service [602]). Each COS is assigned a TRS level for each time mode;...
Page 70
1.8 Toll Restriction (TRS) Features Denied Code Tables Exception Code Tables Level 5 Tables for Levels 2 through 5 Tables for Levels 5 through 6 Level 6 Tables for Levels 2 through 6 Tables for Level 6 Level 7 Not Programmable Not Programmable →...
Page 71
1.8 Toll Restriction (TRS) Features [Flowchart] An extension user tries to make a CO line call. Was the number dialed using System Speed Dialing? Is TRS Override by System Speed Dialing enabled? Checks the TRS level of Checks the TRS level of the extension's COS in the extension's COS for the current time mode.
Page 72
1.8 Toll Restriction (TRS) Features Failure to upgrade the on-premise PBXs or peripheral equipment to recognize the new codes as they are established will restrict the customer and users of the PBX from gaining access to the network and to these codes. KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
1.8 Toll Restriction (TRS) Features User Manual References 1.5.3 Extension Dial Lock 2.1.1 Extension Control 1.8.3 Dial Tone Transfer Description Allows an extension assigned as a manager change the Toll Restriction (TRS) level (→ 1.8.1 Toll Restriction (TRS)) of an extension for the purpose of making a single CO line call. The extension user first calls a manager, who then presses the Toll Restriction button, giving the extension user a dial tone from which the normally unauthorized call can be made.
1.8 Toll Restriction (TRS) Features 1.8.4 Walking COS Description Extension users can temporarily assign their own Class of Service (COS) to another extension, allowing them to make calls as if from their own telephones. This feature is useful when a manager needs to borrow another employee's telephone to make a call. The superior enters the Walking COS feature number followed by his or her extension number and extension personal identification number (PIN), then makes the call.
Page 76
1.8 Toll Restriction (TRS) Features [Programming Example: Verified Codes] Itemized Location Verified User Verified Billing Code Code Name Code PIN for ARS 1111 Tom Smith 1234 2323 2222 John White 9876543210 4545 → Verified Code [120] → Verified Code Name [121] →...
Page 77
1.8 Toll Restriction (TRS) Features User Manual References 1.2.6 Calling without Restrictions 3.2.2 Manager Programming Feature Guide...
1.9 Automatic Route Selection (ARS) Features Automatic Route Selection (ARS) Features 1.9.1 Automatic Route Selection (ARS) Description Different telephone carriers charge different rates for calls placed to different areas. Your PBX may use different telephone carriers to make calls to different areas in an effort to reduce costs. Automatic Route Selection (ARS) is a feature which automatically selects different carriers each time a CO line call is made.
Page 79
1.9 Automatic Route Selection (ARS) Features [Carrier Selection Procedure Flowchart] The numbers in parentheses indicate the corresponding items found under [Programming Procedures] on the following pages. An extension user accesses a CO line and dials a telephone number. No (Normal CO Line Access) Is the ARS mode (1) enabled? Sends the telephone number as dialed.
Page 80
1.9 Automatic Route Selection (ARS) Features Calls that are exempt from ARS are connected to the user-selected line, via the default carrier for that line. [Programming Example: ARS Leading Number Exception Table] Location Leading No. Exception → ARS Exception Number [325] In this example: 555, 556, and 567 are local exchanges.
Page 81
1.9 Automatic Route Selection (ARS) Features table and break each day of the week into different time blocks. A different carrier can then be assigned to each time block. Routing Plan Time Table: For each Routing Plan, a different carrier can be assigned for each time of day and each day of the week.
Page 82
1.9 Automatic Route Selection (ARS) Features [Command Explanation] Description Command Inserts the Carrier Access Code Inserts the user-dialed number minus any removed digits Inserts a pause Inserts the Authorization Code for Tenant Inserts the Authorization Code for CO Line Group Inserts the Itemized Billing Code [0-9, , #]...
Page 83
• ARS Data Import/Export ARS tables and data can be copied to and from the PBX and a PC using the KX-TAW848 Maintenance Console software. Files are saved in CSV (Comma Separated Value) format. Because of the large amounts of programming that may be necessary to use ARS effectively, you may choose to export ARS tables and data to a PC, edit them using the software of your choosing, then import the new data to the PBX.
1.10 Conversation Features 1.10 Conversation Features 1.10.1 Hands-free Operation Description A proprietary telephone (PT) user can talk to another party without lifting the handset. Pressing specific buttons, such as REDIAL, automatically activate hands-free mode. Conditions • PTs with the MONITOR Button PTs with the MONITOR button can dial in hands-free mode but cannot have hands-free conversations.
1.10 Conversation Features the second call by placing the current call on hold. Pressing the Release button enables one to disconnect the line during or after conversation, or to complete a Call Transfer. Feature Guide References 1.18.2 Flexible Buttons User Manual References 1.3.5 Answer/Release Button 1.4.7 Headset Operation 3.1.2 Settings on the Programming Mode...
1.10 Conversation Features • Disconnect Time (Only for Flash/Recall Mode) The amount of time between successive accesses to the same CO line is programmable for each CO line port (→ LCOT Disconnect Time [418]). • This feature generates a Station Message Detail Recording (SMDR) call record (→ 1.21.1 Station Message Detail Recording (SMDR)), restarts the call timer, inserts a pause, and checks the Toll Restriction (TRS) level (→...
Page 87
1.10 Conversation Features Feature Description Extension-to-CO Line If a call between an extension user and an outside party is established, the Call Duration call duration can be restricted by the system timer selected for each CO line group (→ Extension-to-CO Line Call Duration [472]). Both parties will hear an alarm tone 15 seconds before the timer expires, at five-second intervals.
1.10 Conversation Features 1.10.8 Paralleled Telephone Description By connecting telephones in parallel, you can increase the number of telephones connected to the PBX without adding additional extension cards. Both wired and wireless telephones can be connected in parallel. Single line telephones (SLTs) and analog proprietary telephones (APTs) can be connected to other telephones or connectors, allowing two telephones to be connected to the PBX through just one extension port.
1.10 Conversation Features Installation Manual References 2.6.2 Parallel Connection of the Extensions 1.10.9 Calling Party Control (CPC) Signal Detection Description The Calling Party Control (CPC) signal is an on-hook indication (disconnect signal) sent from a CO line when the other party hangs up. To maintain efficient utilization of CO lines, the PBX monitors each line's status and when CPC signal is detected on a line, the PBX disconnects the line and alerts the extension with a reorder tone.
1.11 Transferring Features 1.11 Transferring Features 1.11.1 Call Transfer Description An extension user can transfer a call to another extension or an outside party. The following features are available: Feature Transferring method With Announcement Transfer is completed after announcing the transfer to the destination party. Transfer is completed without an announcement.
Page 91
1.11 Transferring Features Destination Availability CO Line Group Access no. + CO Line Group no. + Phone no. • One-touch Transfer DSS Console users and the proprietary telephone (PT) users can hold a call and quickly transfer it to an extension by pressing the DSS button directly. A One-touch Dialing button can also be used if the TRANSFER command is stored with an extension number or a telephone number (→...
1.12 Holding Features 1.12 Holding Features 1.12.1 Call Hold Description An extension user can put a call on hold. The following Hold features are available: Feature Description Call Hold General Any extension can retrieve a held call. Exclusive Call Hold Only the extension user who held the call can retrieve it.
1.12 Holding Features Hold Transfer to CO Line Transfer to Extension Flashing the hookswitch Flashing the hookswitch Flashing the hookswitch Mode 1 Going on-hook CO Line Access No. Extension No. Flashing the hookswitch Flashing the hookswitch Flashing the hookswitch Mode 2 Hold Feature No.
1.12 Holding Features • Retry If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the originator will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another parking zone or a vacant zone.
1.12 Holding Features User Manual References 1.4.3 Call Splitting 1.12.4 Music on Hold Description Music can be played to any party on hold. The following audio sources are available: Internal audio source External audio source Tone Either a background music (BGM) or tone can be selected as the Music on Hold (→Music on Hold [711]). The audio source for BGM can be selected through system programming (→Audio Source Selection for BGM [710]).
1.12 Holding Features 1.12.5 Consultation Hold Description When an extension user is on a call and performs a Call Transfer (→ 1.11.1 Call Transfer), Call Splitting (→ 1.12.3 Call Splitting), or tries to establish a conference call (→ 1.13.1.2 Conference), the call is automatically placed on consultation hold.
1.13 Conference Features 1.13 Conference Features 1.13.1 Conference Features 1.13.1.1 Conference Features—OVERVIEW Description A conference call allows three or more parties to have a conversation. The following features are available to establish a conference call: Feature Description Details in Conference During a two-party conversation, an extension user can •...
1.13 Conference Features • To allow a three-party conference call involving an outside party or parties to continue after the originator leaves, it is necessary to enable calls to be transferred to CO lines through COS programming. • Unattended Conference Call Duration The duration of an Unattended Conference can be restricted by the Unattended Conference Recall time.
Page 99
1.13 Conference Features Conditions • S-CO Button Any flexible button can be customized as the S-CO button. • Privacy Release Time Privacy is released for five seconds to allow the conversation to be joined. • This feature overrides Data Line Security (→ 1.10.4 Data Line Security) and Executive Busy Override Deny (→...
1.14 Paging Features 1.14 Paging Features 1.14.1 Paging Description An extension user can make a voice announcement to several people at once. The announcement is heard through the built-in speakers of proprietary telephones (PTs) and/or an external pager (loudspeaker) which belong to a paging group. The paged person can answer the page from a nearby telephone.
Page 101
1.14 Paging Features Conditions • Extensions which cannot be paged are: – Portable stations (PSs) – Single line telephones (SLTs) – Ringing or busy PTs – PTs in Paging Deny mode – PTs in Paging DND mode These extensions cannot be paged, but can answer a page. •...
1.15 Optional Device Features 1.15 Optional Device Features 1.15.1 Doorphone Call Description A visitor can use a doorphone to call its preprogrammed destination. Extension users can call a doorphone. Conditions • Hardware Requirement: An optional doorphone and DPH card. • Call Destination The destination of doorphone calls can be assigned to each doorphone port for each time mode (→...
1.15 Optional Device Features 1.15.2 Door Open Description Using an extension telephone, an extension user can unlock a door for a visitor. The door can be unlocked by extension users who are allowed to unlock the door in the Class of Service (COS) programming (→...
1.15 Optional Device Features User Manual References 1.3.4 Trunk Answer From Any Station (TAFAS) 1.15.4 Background Music (BGM) Description A proprietary telephone (PT) user can listen to background music (BGM) through the built-in speaker while on-hook and idle. BGM—External BGM can also be broadcast in the office through an external pager (loudspeaker) and can be turned on and off by an extension assigned as a manager.
Page 105
By installing the new MSG card then recording each message again. The PBX will automatically store the new recordings in each MSG card. By transferring messages from the PBX to a PC using KX-TAW848 Maintenance Console, then transferring them back to the PBX with the new MSG card installed.
1.15 Optional Device Features • A progress tone is sent to a manager extension before recording messages for a preprogrammed time period, or while clearing a prerecorded message assigned to a floating extension number. • Record a message when PBX traffic is light, such as early morning or late evening. •...
1.15 Optional Device Features PBX will assume the caller is trying to access a specific feature. [Programming Example: DISA OGM Setting] Each DISA OGM can be assigned a floating extension number, a destination for each DISA AA number, and the OGM number of the OGM played when the called destination is busy or in Do Not Disturb (DND) mode. Automated Attendant No.
1.15 Optional Device Features calls can only be made to preprogrammed destinations and security is not an issue) or Operator Calls (→ 2.2.5 Operator Features). Security Mode Intercom Calls CO Line Calls All Security CO Line Security No Security Permitted Walking COS/Verified Code Entry through DISA While the OGM is playing, DISA callers can use Walking COS (→...
Page 109
1.15 Optional Device Features [Flowchart] A DISA call from an outside party is received. Is there an idle port on an MSG card? (DISA Delayed Answer time expires) Does the CO line group that received the call employ Intercept The PBX answers the call. Routing Busy/DND? (DISA Mute &...
Page 110
1.15 Optional Device Features Continued from previous page No Security None None None None CO Line Security All Security Is the dialed number an extension number or floating extension number? Is the Walking COS/Verified Code Entry feature number dialed? What is the dialed number? Is the correct PIN entered? Other...
Page 111
1.15 Optional Device Features Conditions WARNING There is a risk that fraudulent telephone calls will be made using the CO-to-CO Line Call feature of DISA. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend: Enabling DISA security (CO Line Security or All Security).
1.15 Optional Device Features • Each OGM can be assigned a name to be used as a reference while programming. (→ Outgoing Message (OGM) Name [731]) • Account Code Entry (→ 1.5.4.3 Account Code Entry) can be used when making a CO line call via DISA. Installation Manual References 2.5.3 MSG2 Card Feature Guide References...
1.15 Optional Device Features Conditions • Hardware Requirement: An MSG card • This feature is only effective for calls arriving on DISA lines. • If a fax signal is not detected before the DISA Intercept Routing—No Dial timer expires, the call is redirected to the operator extension, and fax detection ends.
1.15 Optional Device Features • After a sensor has been activated, the PBX will ignore any further alerts from the same sensor for the duration specified by a timer. This timer can be set separately for each sensor. • As long as the previous sensor call is still being performed, any further alerts from the same sensor are ignored.
Page 115
1.15 Optional Device Features Installation Manual References 2.5.1 DPH4 Card 2.8.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays Feature Guide References 2.2.1 Class of Service (COS) User Manual References 1.9.2 External Relay Feature Guide...
1.16 Caller ID Features 1.16 Caller ID Features 1.16.1 Caller ID Description The PBX can receive Caller ID information (a caller's name and telephone number) from calls received on CO lines. This information can be shown on a proprietary telephone (PT) display when receiving a call and can be used to direct calls from specific callers to specific destinations automatically.
Page 117
1.16 Caller ID Features Automatic Caller ID Number Modification When a call is received, the PBX can automatically modify the caller's telephone number according to a preprogrammed set of rules (Caller ID Modification Table). This modified number will be automatically stored in the extension's Incoming Call Log, allowing the extension user to make a call to this number later without worrying about CO Line Access numbers, area codes, etc.
Page 118
1.16 Caller ID Features <Modification Flowchart> A CO line call containing Caller ID information is received. Checks the Caller ID Modification Table assigned to the CO Line Group. Is the caller's area code stored in the Caller ID Modification Table? Modifies the number according to the Modifies the number according to the method programmed in the corresponding...
Page 119
1.16 Caller ID Features [Programming Example: System Speed Dialing Table] Location System Speed (System Speed Telephone No. CLI Destination Dialing Name Dialing No.) ABC Company 912125551234 XYZ Company 913135551234 → System Speed Dialing Name [002] → System Speed Dialing Number [001] Displaying the Caller's Name In addition to the System Speed Dialing Table, each extension can store names and numbers in Personal Speed Dialing.
1.16 Caller ID Features 1.16.2 Incoming Call Log Description When a call containing Caller ID information is received by an extension, the information is shown on the telephone display, notifying the extension user of the caller's identity. This information is also automatically logged in the Incoming Call Log of the extension, and can be viewed later or used to call that caller back.
Page 121
1.16 Caller ID Features If the caller's name is not logged, the caller's phone number is displayed. If the caller's name is logged, the caller's phone number is not displayed. • If the answering destination is not the original destination (Call Forwarding (FWD)—No Answer, Intercept Routing—No Answer, Overflow and Call Pickup): If a call is not answered and forwarded to another destination, or if an extension picks up a call ringing at another extension, the call is logged in the Incoming Call Logs of both the original and the answering...
1.17 Message Features 1.17 Message Features 1.17.1 Message Waiting Description When an extension user calls another extension that does not or cannot answer the call, he or she can leave a Message Waiting notification. The appropriate button or lamp on the called extension user's telephone will light, indicating that a call was missed or a message recorded by the Voice Processing System (VPS) is waiting.
1.17 Message Features • Message Waiting Notification via Voice Mail DTMF Integration If a voice message is left for the called extension, the notification will be cleared either by the PBX after the MESSAGE button (or a Message button) is pressed, or by the VPS after each new message has been played, according to system programming.
Page 124
1.17 Message Features Conditions • An extension user can select only one Absent Message at a time. The selected message is displayed at the extension while on-hook. • The caller must use a display proprietary telephone (PT) to see the Absent Message. User Manual References 1.5.2 Absent Message 3.1.2 Settings on the Programming Mode...
1.18 Proprietary Telephone (PT) Features 1.18 Proprietary Telephone (PT) Features 1.18.1 Fixed Buttons Description Proprietary telephones (PTs) and DSS Consoles feature a wide variety of feature buttons and Line Access buttons, explained below. Note that certain models do not feature certain buttons. For a description of the buttons found on portable station (PS), please refer to the Operating Instructions for each PS.
1.18 Proprietary Telephone (PT) Features Button Usage AUTO ANS (Auto Answer/ Used to receive an incoming call in hands-free mode, or used to mute MUTE) the built-in microphone or handset during a conversation. Used to monitor an intercom call automatically (a hands-free VOICE CALL conversation is not possible).
Page 127
1.18 Proprietary Telephone (PT) Features [Button Usage] Button Usage Single-CO (S-CO) Used to access a specified CO line for making or receiving calls. (→ 1.5.5.3 CO Line Access) Group-CO (G-CO) Used to access an idle CO line in a specified CO line group for making calls.
1.18 Proprietary Telephone (PT) Features Button Usage Time Service* Used to change or display the current time mode (day/lunch/break/ night). (→ 2.2.4 Time Service) Answer Used to answer an incoming call. (→ 1.10.3 Headset Operation) Release Used to disconnect the line during or after a conversation, or to complete a Call Transfer.
Page 129
1.18 Proprietary Telephone (PT) Features Light Pattern of the Line Status Buttons Line Status Incoming Call Intercom Button: Distribution CO Line Status Line Status (ICD) Group Light Line Status Pattern S-CO G-CO L-CO INTERCOM G-DN Idle Green on This extension is using the line. Slow green This extension is holding the line.
Page 130
1.18 Proprietary Telephone (PT) Features Light Pattern of the Corresponding Extension Status Button Corresponding Extension Status Button Light Pattern Idle Busy/Incoming call* /DND for CO line calls Red on Rapid red flashing Incoming call* : Only when Call Pickup by a DSS button is disabled. : Only when Call Pickup by a DSS button is enabled.
1.18 Proprietary Telephone (PT) Features 1.18.4 Display Information Description A display proprietary telephone (PT) can relay the following information to the user while making or receiving calls: Display Item Display Example Condition The extension number and name of the calling or –...
Panasonic VPSs and DTMF Integration. A non-Panasonic VPS can be connected to the SLT ports of the PBX. These ports make up a VM group referred to hereafter as a "VM (DTMF) group". Although DTMF Integration does not offer the ease of use that DPT (Digital) Integration does, the features available through DTMF Integration can satisfy many needs.
Page 133
1.19 Voice Mail Features [Example of VPS Configuration] VM (DPT) Group VM (DTMF) Group Floating extn. no. 500 Floating extn. no. 200 Extn.101 Extn.102 Extn.103 Extn.104 Extn.201 Extn.202 Extn.203 Extn.204 Hybrid Hybrid Hybrid Hybrid Hybrid Port Port Port Port Port Port Port Port...
1.19.3 Voice Mail DTMF Integration 1.19.2 Voice Mail DPT (Digital) Integration Description A Panasonic Voice Processing System (VPS) which supports DPT (Digital) Integration can provide countless features and conveniences that are unachievable using traditional voice mail systems which rely on DTMF Integration.
Page 135
1.19 Voice Mail Features Basic Features Voice Mail Service Allows callers to leave voice messages for specific parties, such as an extension user or an incoming call distribution (ICD) group. Extension users can listen to messages left in their mailboxes at their convenience. Automated Attendant (AA) Service The VPS answers calls and directs callers to dial a number in order to connect themselves to the desired party.
Page 136
1.19 Voice Mail Features Listening to Recorded Messages (Direct Mailbox Access) After the VPS records a message, it will light the appropriate lamp or button on the extension for which the message was intended, to indicate there is a new message. (→ 1.17.1 Message Waiting) The extension user can play the message back simply by pressing the button used for mailbox access;...
Page 137
1.19 Voice Mail Features [Programming Example: Trunk (CO Line) Group Assignment for VPS] These settings are made on the VPS. The trunk (CO line) group number should correspond to the number programmed in the PBX's DIL Table. Trunk (CO Line) Company Greeting No.
Page 138
1.19 Voice Mail Features current time mode, Company Greeting Number 1. (Refer to the above system programming example, "Trunk (CO Line) Group Assignment for VPS".) A customer dials the telephone number for Company B. The call is received on CO line 02 and is handled by DIL distribution according to system programming. (Refer to the above system programming example, "DIL Table".) The tenant number programmed for CO line 02 determines that the current time mode is Lunch (not shown here).
1.19 Voice Mail Features recorded into that extension's mailbox by simply pressing this button (One-touch Two-way Transfer Button). Note When you record Two-way telephone conversations, you should inform the other party that the conversation is being recorded. Time Synchronization* The VPS can automatically adjust its clock if the date and time settings of the PBX are adjusted. For example, if the PBX is programmed to automatically adjust to Daylight Saving Time, the VPS will adjust its clock as well.
1.19.3 Voice Mail DTMF Integration Description A Panasonic Voice Processing System (VPS) or similar product from another manufacturer can provide Voice Mail (VM) and Automated Attendant (AA) services when connected to the SLT ports of this PBX. Connecting a VPS to the PBX via SLT ports is called "DTMF Integration" because the VPS and PBX communicate with each other by sending analog DTMF tones.
Page 141
1.19 Voice Mail Features The caller leaves a message and hangs up. Transferring to a Mailbox Extension users can transfer calls to a mailbox, after which callers can leave a message for the desired party. While answering a call, the extension user simply presses the Voice Mail (VM) Transfer button and enters the extension number of the party the caller wishes to leave a message for.
Page 142
1.19 Voice Mail Features [DTMF Status Signals] Default DTMF Status Condition Status Signal Ringback Tone The PBX is ringing the corresponding extension. Busy Tone The called extension is busy. Reorder Tone The dialed number is invalid. DND Tone The called extension has set Do Not Disturb (DND). (→ 1.3.1.3 Do Not Disturb (DND)) Answer The called extension has answered the call.
Page 143
H = Mailbox Number. The appropriate mailbox number will be sent to the VPS in place of the "H". The DTMF commands here are the default commands used by the PBX. Program either the PBX or your VPS so that these settings match. Note, however, that non-Panasonic VPSs may use different feature names.
Page 144
1.19 Voice Mail Features [DTMF Commands Sent to the VPS] DTMF Command Sent to VPS* VPS Access Method When VM (DTMF) Group When VM (DTMF) Group is in VM Service Mode is in AA Service Mode Answer by Mailbox #6 + H None No command is sent.
Page 145
1.19 Voice Mail Features • The amount of time (inter-digit time) between each individual DTMF tone sent by the PBX can be specified through system programming. • The length of each DTMF tone sent by the PBX can be specified through system programming. •...
1.20 Portable Station (PS) Features 1.20.1 Portable Station (PS) Connection Description A Panasonic KX-TD7680 or KX-TD7690 portable station (PS) can be used in place of a proprietary telephone (PT), providing wireless access to PBX features and call handling. Registration Before a PS can be used, it must be registered with the PBX through system programming ( Registration [690]) and assigned an extension number.
1.20 Portable Station (PS) Features range of another CS, the PS will "hand over" its communications to the new CS. Handover is possible when: The PS is on an intercom call or on a call with an outside party. (The call will not be disconnected during the handover.) A call is ringing at the PS.
Page 148
1.20 Portable Station (PS) Features PS ring group members and related parameters are assigned through system programming, as explained below. Floating Extension Number: When this number is called, all PSs in the group ring. Group Name: Can be displayed on a ringing PS to indicate that the incoming CO line call is a group call, and not a call directed to the PS's extension number.
Page 149
1.20 Portable Station (PS) Features PS Ring Group 2 PS 3, PS 4, and PS 5 will ring simultaneously when a call is directed to floating extension number 302, and, in the case of a CO line call, will display "Sales 2". These PSs will ring individually when a call is directed to their assigned extension numbers (programming not shown here).
Page 150
If a PS in a PS ring group has set the DND feature for CO line calls, the PS will not ring for CO line calls as well as intercom calls directed to the group. • Compatible PS A Panasonic KX-TD7680 and KX-TD7690 can be assigned to PS ring groups. Feature Guide References 1.2.2 Incoming Call Distribution (ICD) Group Features 1.3.1.3 Do Not Disturb (DND)
1.20 Portable Station (PS) Features 1.20.3 Wireless XDP Parallel Mode Description A portable station (PS) can be used in parallel with a wired telephone, i.e., an analog proprietary telephone (APT), or single line telephone (SLT), allowing an extension user to make or receive calls with either the wired telephone or the PS.
Page 152
1.20 Portable Station (PS) Features following extension settings of the wired telephone are copied to the extension settings of the PS when Wireless XDP Parallel mode is activated, and will remain in effect for the PS after the mode is canceled. –...
1.20 Portable Station (PS) Features 1.20.4 PS Directory Description A portable station (PS) user can make a call or access PBX features using information stored in the PS and PBX. Refer to the Operating Instructions supplied with your PS for available directories and usage. Directory Type Description Programming...
1.21 Administrative Information Features 1.21 Administrative Information Features 1.21.1 Station Message Detail Recording (SMDR) Description Automatically logs detailed information for each extension. SMDR Output Port The Serial Interface (RS-232C) port can be used to output Station Message Detail Recording (SMDR) data to a PC, printer, etc.
Page 155
1.21 Administrative Information Features SMDR Format and Contents The following three types of output format can be selected through system programming: Pattern A: 80-column text without call charge information Date Time Dial Number Ring Duration ACC Code (8 digits) (25) (10) 01/02/02 10:03AM...
Page 156
1.21 Administrative Information Features Number in the Data Description Pattern Date Shows the date of the call. Time Shows the end time of a call as hour/minute/AM or PM. Ext (Extension) Shows the extension number, floating extension number, etc., which was engaged in the call. Also shows the following codes: Dxxx: Outgoing CO line call from a doorphone (xxx=doorphone number) (→...
Page 157
1.21 Administrative Information Features Number in the Data Description Pattern CD (Condition Shows other call information using the following codes: Code) TR: Transfer FW: Call Forwarding (FWD) to CO line D0: Call using Direct Inward System Access (DISA) RM: Remote maintenance (modem) (→ 2.3.1 PC Programming) NA: Not answered call RC: Received call...
Page 158
1.21 Administrative Information Features Item Description Timed Reminder call Controls whether Timed Reminder calls are shown. (→ 1.23.4 Timed Reminder) Printing Message Specifies the messages that can be selected from an extension. (→ 1.21.2 Printing Message) Time format Controls whether time is displayed in 12-hour or 24-hour format. Conditions •...
1.21 Administrative Information Features Word Length: Word length indicates how many bits compose each character. Parity Bit: Parity bit indicates what type of parity is used to detect errors in the string of bits composing a character. Make an appropriate selection depending on the requirements of the PC or printer.
1.22 Hospitality Features 1.22 Hospitality Features 1.22.1 Hospitality Features—SUMMARY Description This PBX has several features that support its use in a hotel-type environment. Feature Description Details in Remote Wake-up Call An extension designated as the hotel operator can set a •...
1.23 Extension Controlling Features 1.23 Extension Controlling Features 1.23.1 Extension Personal Identification Number (PIN) Description Each extension can be assigned a personal identification number (PIN) through system programming (→ Extension Personal Identification Number (PIN) [005]) or personal programming (Extension PIN [Personal Identification Number]).
1.23 Extension Controlling Features 3.2.2 Manager Programming 1.23.2 Extension Feature Clear Description Extension users can clear the following features set on their own telephone all at once: Features After Setting Absent Message FWD*/DND* Call Pickup Deny Allow Call Waiting* Enable (Call Waiting tone) Data Line Security Executive Busy Override Deny Allow...
1.23 Extension Controlling Features 1.23.3 Walking Extension Description It is possible for an extension user to trade extension settings with another extension. When Walking Extension is executed, all extension settings (extension number, Class of Service (COS), One-touch Dialing memory, etc.) of the "old" extension are exchanged with the "new" extension. This feature is useful when an extension user moves desks, or when an extension user has no permanent desk.
1.23 Extension Controlling Features record messages. (→ 1.15.5 Outgoing Message (OGM)) A different message can be assigned for each time mode (→ 2.2.4 Time Service). Installation Manual References 2.5.3 MSG2 Card User Manual References 1.7.1 Timed Reminder 2.1.6 Hospitality Features 1.23.5 Remote Extension Control by User Description Extension users can remotely change the feature settings, such as Call Forwarding (FWD), and time service...
1.24 Audible Tone Features 1.24 Audible Tone Features 1.24.1 Dial Tone Description The following dial tones inform extension users about features activated on their extensions: Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B. Type Description Tone 1A/1B...
1.24 Audible Tone Features 1.24.2 Confirmation Tone Description At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone to extension users. Type Description Tone 1 Sent when the setting is accepted. Sent when a call is received in voice-calling mode (Alternate Receiving—Ring/Voice).
(SLTs), Cell Stations (CSs), DSS Consoles, and Voice Processing Systems (VPS) to the PBX. The devices which can be connected to each type of port are listed below. APT Port: APT, DSS Console, and Panasonic VPS which supports DPT (Digital) Integration SLT Port: SLT and VPS which supports DTMF Integration...
2.2 System Configuration—Software System Configuration—Software 2.2.1 Class of Service (COS) Description Each extension is assigned a Class of Service (COS) number (→ Class of Service [602]). The following features operate differently depending on an extension's COS. Internal Call Block (→ 1.1.2.2 Internal Call Block) Call Forwarding (FWD) (→...
2.2 System Configuration—Software 2.2.2 Group Description This PBX supports various types of groups. CO Line Group CO lines can be grouped into CO line groups based on carrier, CO line type, etc. (→ LCOT CO Line Group Number [402]). Several settings can be assigned on a CO line group basis. All CO lines belonging to a CO line group follow the programming for that CO line group.
Page 171
2.2 System Configuration—Software [Example] Paging Group 1 Paging Group 2 Paging Group 3 Paging Group 4 Extension Group 1 Extension Group 2 Extension Group 3 Pager Extn. 100 Extn. 101 Extn. 102 Extn. 103 Extn. 104 Extn. 105 Idle Extension Hunting Group If a called extension is busy or in Do Not Disturb (DND) mode, Idle Extension Hunting redirects the incoming call to an idle member of the same idle extension hunting group.
2.2 System Configuration—Software [Example] VM (DPT) Group VM (DTMF) Group Floating extn. no. 500 Floating extn. no. 200 Extn.101 Extn.102 Extn.103 Extn.104 Extn.201 Extn.202 Extn.203 Extn.204 Hybrid Hybrid Hybrid Hybrid Hybrid Port Port Port Port Port Port Port Port Port Port (DPT [Digital] Integration) (DTMF Integration)
Page 173
2.2 System Configuration—Software 1.2. Time Service Time modes are used by many PBX features to determine how they will function during different times of day (→ 2.2.4 Time Service). The start and end times of each time mode (day/lunch/break/ night) for each day of the week are programmed in a Time Table. Each Time Table has a number which corresponds to the tenant number of the tenant it serves.
Page 174
2.2 System Configuration—Software [Programming Example: Internal Call Block] Called Party Caller COS 1 COS 2 COS 3 COS 4 COS 5 COS 6 COS 1 COS 2 Block Block COS 3 COS 4 Block Block COS 5 Block Block Block Block COS 6 Block...
Page 175
2.2 System Configuration—Software COS numbers from accessing certain CO line groups, each tenant can be given its own CO line groups which no other tenant can access. [Programming Example: External Call Block] CO Line CO Line CO Line CO Line CO Line CO Line Group 1...
2.2 System Configuration—Software 2.2.4 Time Service Description Time modes are used by many PBX features to determine how they will function during different times of day. For example, incoming calls can be directed to sales staff during the day and to a Voice Processing System (VPS) at night, extension users can be prohibited from making long distance calls during lunch time, etc.
Page 177
2.2 System Configuration—Software [Programming Example: Time Table] Time Table No. (Tenant No.) Time Schedule Day 1 09:00 15:00 11:00 12:00 Lunch 12:00 18:30 15:00 Day 2 13:00 19:00 18:00 Break 1 start 15:00 20:30 06:00 Break 1 end 15:15 20:45 Break 2 start 22:30 21:00...
Page 178
2.2 System Configuration—Software Destination of Operator Calls (→ 2.2.5 Operator Features) Toll Restriction (TRS) level of each COS COS numbers which are permitted/restricted to access certain CO line groups (External Call Block) (→ 1.5.5.3 CO Line Access) Outgoing Message (OGM) for Timed Reminder (→ 1.23.4 Timed Reminder) Queuing Time Table used by an ICD group (→...
Page 179
2.2 System Configuration—Software Light Pattern Current Time Mode Red on Night Green on Lunch Slow green flashing Break Slow red flashing Holiday Note Pressing a Time Service button will change the current time mode only if the COS assigned to the extension is authorized to do so (→...
2.2 System Configuration—Software 2.2.5 Operator Features Description This PBX supports separate operators for both the PBX and each tenant. Any extension or incoming call distribution (ICD) group can be designated as an operator. Operators are the destination of Operator Calls. Type Description PBX operator...
Page 181
2.2 System Configuration—Software Manager Feature Description Details in Password Manager Manager Changes the manager password. Required – Programming Password Change Verified Code Sets a Verified Code PIN for each Required • 1.8.5 Verified Personal Verified Code. Code Entry Identification Number (PIN) Set Remote PIN Clear Clears the extension PIN of an Required •...
Page 182
2.2 System Configuration—Software 3.2.2 Manager Programming Feature Guide...
Although many PBX features can be programmed using a proprietary telephone (PT) (→ 2.3.2 PT Programming), a PC connected to the PBX can use the KX-TAW848 Maintenance Console software to program in further detail. System programming, diagnosis, and data upload/download can be performed either through on-site programming or remote programming.
Page 184
2.3 System Data Control Connection Methods for Remote Programming Required Method Description Hardware Off-site modem Call the PBX and have the call directed to the floating RMT card and extension number assigned to the analog remote maintenance user-supplied feature (→ Modem Floating Extension Number [811]) using modem one of the following methods: Direct Access: Using the off-site modem, dial a telephone...
2.3 System Data Control Installation Manual References 2.5.5 RMT Card 3.1 Overview 3.2 Connection 3.3 Installation of the PC Programming Software Feature Guide References 1.1.1.2 Direct In Line (DIL) 3.2 PC Programming 2.3.2 PT Programming Description A proprietary telephone (PT) can be used to customize the settings of the PBX or of an extension, using the following programming features: Programming Authorized...
2.3 System Data Control • The PBX will allow 16 simultaneous personal programming sessions, or one system or manager programming session and 15 personal programming sessions. • System Programming Password Level To access system programming, a valid password must be entered. For more details, see Section 3.1 Introduction.
2.3 System Data Control Item Parameter Description Flexible 1. Pattern 1 Select whether or not the prefix " " must be entered before dialing Numbering Type (with feature numbers. 2. Pattern 2 [Example] Call Pickup feature number (without Pattern 1 (with Pattern 2 (without ): 41 Note that certain feature numbers (Line Access numbers, Operator...
2.3 System Data Control Conditions • Station Message Detail Recording (SMDR) will log call information using the PBX clock so that the logging time will be overlapped at the end of Daylight Saving Time. (→ 1.21.1 Station Message Detail Recording (SMDR)) Feature Guide References 1.23.4 Timed Reminder 2.3.5...
Page 189
2.3 System Data Control Feature Default Pattern 1 Pattern 2 (with (without Extension Numbering Scheme 6—Leading Number Extension Numbering Scheme 7–32—Leading Number None None Operator Call Idle Line Access (Local Access) CO Line Group Access Redial Speed Dialing—System/Personal Personal Speed Dialing—Programming Doorphone Call Group Paging External BGM on/off...
Page 190
2.3 System Data Control Feature Default Pattern 1 Pattern 2 (with (without FWD/DND set/cancel—External FWD/DND set/cancel—Internal FWD/DND No Answer Timer set Group FWD set/cancel—Both Group FWD set/cancel—External Group FWD set/cancel—Internal Call Pickup Deny set/cancel Paging Deny set/cancel Walking Extension Data Line Security set/cancel Call Waiting for Intercom Calls set/cancel Call Waiting for CO Line Calls (including doorphone calls, calls for an incoming call distribution group) set/cancel...
Page 191
2.3 System Data Control Flexible Numbering (available while a busy, DND, or ringback tone is heard) Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized for easy use. The numbers should be one digit (0–9, " ", or "#" ) and must not conflict. For a list of the default settings, refer to the following table: [Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)] Feature...
2.3 System Data Control User Manual References 4.2.1 Feature Number Table 2.3.6 Floating Extension Description Virtual extension numbers can be assigned to resources to make them as easily accessible as extensions. These numbers are referred to as "floating extension numbers" and can be assigned as a destination of incoming calls, intercepted calls, etc.
Page 193
2.3 System Data Control Data File Storing Area Main Processing (MPR) software Operating system data area on the Main Board data Default system programming data for Country/area data area on the Main Board each country/area Language data for PT display Each language data area on the Main Board.
2.4 Fault Recovery/Diagnostics Fault Recovery/Diagnostics 2.4.1 Power Failure Transfer Description If the power supply to the PBX fails, specific single line telephones (SLTs) are automatically connected to specific CO lines (Power Failure Connections). The PBX will switch from the current connections to Power Failure Connections, and all existing conversations will be disconnected.
Page 195
2.4 Fault Recovery/Diagnostics number will be displayed in order of highest priority to lowest. The System Alarm button light turns off automatically after all error numbers have been displayed. For details regarding errors and their solutions, refer to the Installation Manual. [Error Example] ERR #100 (10000) [Explanation]...
There are two programming methods: • PC Programming All system programming can be performed. Installing and starting the KX-TAW848 Maintenance Console is described in Section 3.2 PC Programming. Individual PC programming items are described in the on-line help of the Maintenance Console.
Page 199
If a system password is forgotten, it can be found by loading a backup of the system data into a PC, and checking the password using the KX-TAW848 Maintenance Console software. If you do not have a backup of the system data, you must reset the PBX to its factory defaults and reprogram it.
3.1 Introduction 3.1.3 Entering Characters The characters that can be used when performing system programming differ depending on whether programming is being done using a PT or a PC. PT Programming The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available on each button.
Page 201
3.1 Introduction PC Programming The following characters can be used when storing a name, message, password or other text entry data using a PC. Feature Guide...
System programming, diagnosis, and data upload/download can be performed with a PC using the KX- TAW848 Maintenance Console software. This section briefly describes how to install and start KX-TAW848 Maintenance Console on a PC which is connected to the PBX via USB.
The screenshots shown here are for reference only, and may differ from the screens displayed on your 1. Connect the PC to the PBX with a USB cable. 2. Start KX-TAW848 Maintenance Console from the Start menu. 3. Enter a valid programmer code (INSTALLER, ADMIN, or USER), then click [OK].
Page 204
SD Memory Card. To save the system data to the SD Memory Card, either click the "SD Memory Backup" icon, or exit KX-TAW848 Maintenance Console and click "Yes" to save when prompted. •...
Page 205
• The PC will not perform any shutdown operation, or enter the power-saving system standby mode while the KX-TAW848 Maintenance Console is connected to the PBX. To perform either of the operations above, first close the connection to the PBX.
3.3 PT Programming PT Programming 3.3.1 Programming Instructions Requirements PBX settings can be customized through system programming by using a proprietary telephone (PT) with a display, such as the KX-T7735. To access system programming, the Class of Service (COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be connected to the lowest numbered port on the card installed in the lowest numbered slot.
3.3 PT Programming Entering System Programming Mode Using a PT to perform system programming allows an authorized extension user to set a wide range of PBX features and parameters. There are two levels of system programming that can be performed with a PT—administrator level programming and user level programming.
3.3 PT Programming 3.3.2 Basic Programming Date & Time [000] [000] Date Year Month 01–31 00–99 01–12 STORE STORE Minute Hour 00–59 01–12 SELECT STORE NEXT AM/PM System Speed Dialing Number [001] [001] Telephone No. Speed Dialing No. (Location No.) Max.
3.3 PT Programming WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verified code PIN or extension PIN) of the PBX. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend: Keeping PINs secret.
3.3 PT Programming Time Service Switching Mode [101] [101] STORE SELECT STORE Manual/Automatic Time Service Starting Time [102] [102] Day No. Time No. 0 Sun/1 Mon/ 1 Day-1/2 Lunch/ STORE 2 Tue/3 Wed/ 3 Day-2/4 Night 4 Thu/5 Fri/6 Sat Hour:Minute 01:00–12:59 SELECT...
Page 211
3.3 PT Programming Verified Code [120] [120] Location No. Verified Code 0001–1000 1–4 digits STORE STORE Verified Code Name [121] [121] Location No. Name 0001–1000 Max. 20 characters STORE STORE Verified Code Personal Identification Number (PIN) [122] [122] Location No. 0001–1000 Max.
3.3 PT Programming 3.3.4 Time Programming Hold Recall Time [200] [200] Time 0–240 s STORE STORE 60 s Transfer Recall Time [201] [201] Time 1–240 s STORE STORE 60 s Intercept Time [203] [203] Time No. Time No. Time 1 Day/2 Lunch 1–240 s STORE STORE...
3.3 PT Programming DISA CO-to-CO Line Call Prolong Time [210] [210] Time 0–7 min STORE STORE 3 min DISA Intercept Time [211] [211] Time No. Time No. Time 1 Day/2 Lunch 0–60 s STORE STORE 3 Break/4 Night 40 s 3.3.5 TRS/ARS Programming TRS Override by System Speed Dialing [300]...
Page 214
3.3 PT Programming Emergency Number [304] [304] Location No. Emergency No. 01–10 Max. 32 digits STORE STORE ARS Mode [320] [320] STORE SELECT STORE Off/Idle Line/ All Access ARS Leading Number [321] [321] Location No. Leading No. 0001–1000 Max. 16 digits STORE STORE ARS Routing Plan Table Number [322]...
Page 215
3.3 PT Programming ARS Routing Plan Table (1–16) [331–346] [331–346] Day No. ARS Time No. Priority 0 Sun/1 Mon/2 Tue/ 1 TimeA/2 TimeB/ 1–6 STORE 3 Wed/4 Thu/5 Fri/6 Sat 3 TimeC/4 TimeD Carrier Table No. 1–10/ None STORE ARS Carrier Name [350] [350] Carrier Table No.
3.3 PT Programming 3.3.6 CO Line Programming LCOT CO Line Connection [400] [400] Slot No. Port No. 02–04 01–04 STORE SELECT STORE No Connect/ Connect To the Next Port No. NEXT LCOT CO Line Name [401] [401] Name CO Line No. 3 digits Max.
3.3 PT Programming DIL 1:1 Destination [450] [450] Slot No. Port No. Time No. Destination No. 1 Day/2 Lunch/ 02–04 01–04 1–4 digits STORE 3 Break/4 Night Day: 601 Lunch: Not stored Break: Not stored Night: 601 STORE CO Line Group Intercept Destination [470] [470] CO Line Group No.
3.3 PT Programming DISA Continuous Signal Detection [476] [476] CO Line Group No. 01–64 STORE SELECT STORE No Detect/ Detect DISA Cyclic Signal Detection [477] [477] CO Line Group No. 01–64 STORE SELECT STORE No Detect/ Detect Caller ID Signal Type [490] [490] Slot No.
Page 220
3.3 PT Programming CO Line Call Duration Limitation [502] [502] COS No. 01–64 STORE SELECT STORE Disable/ Enable Call Transfer to CO Line [503] [503] COS No. 01–64 SELECT STORE STORE Disable/ Enable Call Forwarding to CO Line [504] [504] COS No.
3.3 PT Programming Account Code Mode [508] [508] COS No. 01–64 STORE SELECT STORE Option/ Forced TRS Level for System Speed Dialing [509] [509] COS No. TRS Level 01–64 1–7 STORE STORE TRS Level for Extension Dial Lock [510] [510] COS No.
3.3 PT Programming Call Forwarding—No Answer Time [605] [605] Extn. No. Time 0–120 s 1–4 digits STORE STORE 15 s ICD Group Member [620] [620] Location No. Extn. No. Group No. 01–32 1–4 digits STORE 01–64 Location No. 01–24: 101–124; Location No.
3.3 PT Programming Destination for Overflow Time Expiration [625] [625] Destination No. Time No. Group No. Max. 32 digits 1 Day/2 Lunch/ STORE 3 Break/4 Night 01–64 STORE Overflow Time [626] [626] Overflow Time Group No. ( None/1–125)×10 s STORE STORE 01–64 Destination When All Busy [627]...
3.3 PT Programming Queuing Time Table [630] [630] Time No. Table No. Group No. 1 Day/2 Lunch/ None/01–64 STORE 3 Break/4 Night 01–64 STORE Sequences in Queuing Time Table [631] [631] Table No. Location No. 01–16 01–64 STORE SELECT None/Overflow/ Disconnect/"N"...
3.3 PT Programming Extension Groups of a Pickup Group [650] [650] Pickup Group No. Extn. Group No. 01–64 001–032 STORE SELECT STORE No/Yes Pickup Group No. 01–32=Extn. Group No. 001–032, Pickup Group No. 33–64=All extension groups VM Group Floating Extension Number [660] [660] Extn.
3.3 PT Programming Note Please refer to Installation Manual for more information regarding Portable Station (PS) registration. PS Termination [691] [691] PS No. 001–028 STORE STORE Personal Identification Number (PIN) for PS Registration [692] PIN for PS Registration [692] 1–4 digits STORE STORE 1234...
3.3 PT Programming Music for Transfer [712] [712] STORE SELECT STORE Hold Music/ Ring back Doorphone Call Destination [720] [720] Time No. Slot No. Port No. 1 Day/2 Lunch/ 08–09 1–4 STORE 3 Break/4 Night Destination No. Max. 32 digits STORE Doorphone Number Reference [729] [729]...
3.3 PT Programming 3.3.11 Card Programming Slot Card Type Reference [900] [900] Slot No. Card Name 01–11 Reference only STORE Slot Card Deletion [901] [901] Slot No. Delete Confirming the 01–11 STORE STORE deleting operation. To the Next Slot No. NEXT Slot Card Reset [902] [902]...
4.1 Introduction Introduction 4.1.1 Software Modes When the Maintenance Console is started, it enters Initial mode. From here, you can choose to enter either Batch mode or Interactive mode to program the PBX. • Batch mode Batch mode allows you to create new system data files, and make modifications to system data files stored on your PC, without being connected to the PBX.
Page 235
4.1 Introduction Access to menu options within the Maintenance Console is also restricted depending on the Programmer Code, and the current software mode (see "4.1.1 Software Modes"). When a menu option is limited to certain access levels, this is noted in the initial description of that menu option, for example: "This option is only available at Installer level."...
Page 236
4.1 Introduction Tool Menu Option Initial Batch Interactive SD memory backup Extension list View Import —> Feature - Speed Dial and Caller ID Import —> ARS - Leading Digit Import —> ARS - Except Code Import —> ARS - Routing Plan Export —>...
4.1 Introduction View Menu Option Initial Batch Interactive Toolbar Status Bar Window Menu Option Initial Batch Interactive Cascade Tile(Horz) Tile(Vert) Help Menu Option Initial Batch Interactive Help Additional Information About 4.1.4 Standard Buttons There are several standard buttons that are displayed on many screens within the Maintenance Console. The standard buttons are as follows: Button Function...
4.1 Introduction "In service" means that the card is installed correctly in the PBX, and is capable of being used normally. "Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed from use. This allows settings to be modified or software to be upgraded. To change the status of a card Open the Configuration—Slot screen of the Maintenance Console (see "4.7.1 Slot [1-1]").
Opens a system data file previously saved on the PC, and enters Batch mode. When opening a file created with an older version of the Maintenance Console (e.g. KX-TAW848 Maintenance Console version 1.1), you will be asked whether you want to convert the data for use with the current version or not.
4.2 File 4.2.3 File—Close Closes the system data file that is currently being modified, and returns to Initial mode. To close a system data file • From the File menu, select Close. If the system data file has not been saved, a warning message will be displayed, giving you the option to save the file.
Page 241
4.2 File If the system data file being modified has not been saved, a warning message will be displayed, giving you the option to save the file. • Click Yes to save the file. • Click No to abandon the changes. Feature Guide...
4.3 Connect Connect 4.3.1 Connect—RS-232C Connects to the PBX in Interactive mode through the serial RS-232C interface of the PBX. The settings are as follows: Setting Values Description Port COM1–COMx Specify the number of the COM port assigned to the PC's RS-232C interface. Only available COM ports will be displayed.
4.3 Connect 4.3.3 Connect—Modem Connects to the PBX in Interactive mode through the modem. To access the PBX remotely using this feature, an RMT card must be installed and the analog remote maintenance floating extension number assigned. For more details, see "4.16.3 Miscellaneous [10-3]". The settings are as follows: Setting Values...
4.3 Connect Button Function Creates a new, empty profile. Any unsaved modem data currently being edited is lost. Initial Sends the value entered in Command to the modem. Begins connection using the modem. Cancel Closes the current screen without connecting. To connect using a modem From the Connect menu, select Modem.
4.4 Tool Tool 4.4.1 Tool—SD memory backup Saves system data from the PBX to the SD memory card. Backup begins as soon as this option is chosen. To back up system data • From the Tool menu, select SD memory backup. 4.4.2 Tool—Extension List View Displays a list of all programmed extension numbers and types.
Page 246
4.4 Tool The types of data that can be imported using this tool, and the matching destination fields, are as follows: Feature - Speed Dial and Caller ID Data Type Import Destination Reference System Speed Dialing Location 4.12.1 Speed Dialing & Caller Number ID—Main Table [6-1-1] Name...
4.4 Tool Click OK to link the fields. If data in a field being imported does not match the required format for the import destination, an error message will be displayed when the import operation is attempted, and the operation will be cancelled. This can occur when, for example, the destination field can only accept numeric data, but the data being imported contains alphabet characters, as the correct fields were not linked together.
Page 248
4.4 Tool If you do not specify a path, the new file will be saved in the same directory as the source file. • Click the "…" button to navigate to and select the target file. Click OK. If the convert operation was successful, a message will be displayed. Click OK.
4.5 Utility Utility 4.5.1 Utility—Diagnosis Performs diagnostic tests on cards installed in the PBX, to ensure that they are operating correctly. The tests carried out vary according to the type of card being tested. If any of the tests listed here returns the result "NG" ("No Good"), contact your dealer. Test results can be saved, as a TXT-format (text) file.
4.5 Utility 4.5.2 Utility—File Transfer PC to PBX (SD Card) Copies PBX system files (program files and data files) from the connected PC to the SD memory card installed in the PBX. Pre-existing files on the SD memory card are overwritten. This option is only available at Installer level.
4.5 Utility Initial Data Name on SD Memory Card Corresponding Card DSINI DSIHLC HLC4 DSIPLC PLC4/PLC8 DSISLCLC SLC4/SLC8 DSILCOT LCOT2/LCOT4 DSIEIO DPH4 To transfer files to the SD memory card From the Utility menu, select File Transfer PC to PBX (SD Card). The dialog box will be displayed.
4.5 Utility Only the files listed in the table above can be downloaded. Selecting any other file will cause an error message to be displayed. Click Transfer. The Save dialog box will be displayed. Navigate to the folder in which you want to save the file. Enter a file name.
4.5 Utility Files are stored on the MSG card in the location specified by the file's header information. Uploaded files are automatically renamed as necessary. If this location already contains an OGM, it will be overwritten by the newly uploaded message. To transfer OGMs to an MSG card From the Utility menu, select Message File Transfer PC to PBX.
4.5 Utility Button Function Capture Saves the currently displayed Error Log information as a text file. Minor Displays minor errors, which affect only a certain part of system operation. Major Displays major errors, which affect operation of the whole system, or result in system failure.
4.5 Utility Item Description Status Service status of the attached CS: INS, OUS, or FAULT. If the status is FAULT, subsequent data items for that port will be left blank. Version Version number of the program file stored in the CS Revision Revision number of the program file stored in the CS CSID...
4.5 Utility To view PS information From the Utility menu, select PS Information. Click Refresh. 4.5.10 Utility—System Reset—Reset by the Command Updates the main system program and data files stored within the PBX using files taken from the SD memory card, and resets the connected PBX. This option is only available at Installer level.
Page 257
4.5 Utility Select an option: • Click OK to reset the PBX. If OK is clicked, a final confirmation screen will be displayed. • Click Cancel to return to the main screen without copying files. Click OK to reset the PBX, or Cancel to return to the main screen without copying files. If the reset command was not carried out correctly, an error message will be displayed, and you will be returned to the main screen.
Is the USB cable firmly connected to both the PC and the PBX? • Is the USB driver on the PC running? To confirm, open the Windows Device Manager, and look for "Panasonic KX-TDA USB Main Unit driver" in the USB Controllers section. If it is not present, re-install the USB driver.
Page 259
4.6 Help If I reset the PBX directly after modifying settings, the modified settings are not updated in the PBX. • When you click Apply, the settings are updated in the PBX, but are not yet saved to the SD memory card. If system data is not saved to the SD memory card, the PBX will restore the data that was last saved to the card in the event that the PBX is reset, or power is turned off and back on again.
Page 260
4.6 Help When registering a Portable Station, I set an extension number, click the Select cell to set it to ON (blue), and click Registration, but the registration process does not execute. • After setting the extension number, click Apply to update the PBX with the change before continuing.
Page 261
4.6 Help How do I prevent extension numbers being automatically assigned to a newly installed card? • Change Extension Number Set Mode in the Configuration—Option screen (see "4.7.8 Option [1-3]") from Automatic to Manual. How do I prevent newly installed cards automatically being changed to "INS"? •...
Page 262
4.6 Help • The number entered in Location No. on the Configuration—Extension Port screen (see "4.7.11 Extension Port [1-5]") is the same as that entered for another DSS Console. Change this so that the numbers do not overlap. I have set the type of an extension port to "VM (DPT)", but I cannot apply this setting.
Page 263
4.6 Help • Perform the following steps: Confirm that the Numbering Plan you will change is not currently being used by any extensions (see "4.4.2 Tool—Extension List View"). If it is being used by extensions, temporarily change the number of those extensions to that of another numbering plan, or delete the extension number (see "4.10.1 Wired Extension—Extension Settings [4-1-1]"...
Page 264
4.6 Help I cannot change a feature number. • It is not possible to use the same number for 2 items. The number you are trying to store cannot be used if it is already being used by: • A feature number •...
Page 265
4.6 Help • Perform the following steps: On the Groups—Incoming Call Distribution Group—Group Settings screen (see "4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]"), enter the floating extension number you chose for the ICD group in the Floating Extension Number cell. Click Apply.
Page 266
4.6 Help I have set FWD through system programming, but calls are still not being forwarded. • Perform the following steps: Check that the Present Button Status of the target extension on the Extension— Wired Extension—FWD/DND screen (see "4.10.2 Wired Extension—FWD/DND [4-1-2]"), or Extension—Portable Station—FWD/DND screen (see "4.10.8 Portable Station—FWD/DND [4-2-2]") is set to "FWD".
4.7 Configuration [1] Configuration [1] 4.7.1 Slot [1-1] The operating characteristics associated with each service card can be programmed. Slot Type Indicates the type of each slot (reference only). Default Not applicable. Value Range Fixed Slot: For initially installed 4 Hybrid ports Free Slots Type A (02–04): For LCOT4/HLC4/PLC4 Free Slots Type B (05–06): For PLC8/SLC8 Option Slots (08–09): For MSG2/DPH4/ECHO8/EXT-CID card...
Page 268
4.7 Configuration [1] LCOT4: 4-Port Analog Trunk Card MSG2: 2-Channel Message Card DPH4: 4-Port Doorphone Card ECHO8: 8-Channel Echo Canceller Card EXT-CID: Extension Caller ID Card Maximum Quantity: Extension card: 3 (1 in the Free Slots Type A; 2 in the Free Slots Type B) Trunk card: 2 MSG2 card: 2 DPH4 card: 1...
4.7 Configuration [1] Programming References 4.7.6 Slot [1-1] Card Command Feature Guide References None Version Indicates the version of the installed card (reference only). Default Current version number Value Range Version number Feature Guide References None 4.7.2 Slot [1-1] Extension Card Property The property for the extension cards can be specified.
Page 270
4.7 Configuration [1] Value Range 8 × n (n=3–255) ms Programming References 4.7.1 Slot [1-1] Feature Guide References None SLT Off Hook Guard Time Specifies the length of time used to prevent the PBX from mistaking an off-hook signal as a pulse dial. Default 504 ms Value Range...
Page 271
4.7 Configuration [1] Value Range 8 × n (n=1–5) ms Programming References 4.7.1 Slot [1-1] Feature Guide References None SLT Flash Detection Enables the PBX to detect a flash signal an SLT user sent by pressing the hookswitch or the Flash/Recall button.
4.7 Configuration [1] Default 904 ms Value Range 8 × n (n=3–191) ms Programming References 4.7.1 Slot [1-1] Feature Guide References None DTMF-R STD Detection Time Specifies the minimum time required by the PBX to detect the DTMF tone. Default 30 ms Value Range 2 ×...
Page 273
4.7 Configuration [1] First Dial Timer (CO) Specifies the minimum time that the PBX waits after seizing a CO line, before sending the dialed digits to the telephone company. This allows the telephone company to have enough time to accept the dialed digits correctly.
Page 274
4.7 Configuration [1] Feature Guide References None Bell Detection—Bell Off Detection Timer Specifies the minimum time required by the PBX to confirm that the bell signal is no longer sent from the telephone company, before the PBX realizes the call is lost. Default 6.0 s Value Range...
Page 275
4.7 Configuration [1] Programming References 4.7.1 Slot [1-1] Feature Guide References None Low Speed Pulse Dial—Pulse % Break Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal and make (off-hook) signal in a pulse dial. Default 60 % Value Range...
Page 276
4.7 Configuration [1] Default 40 ms Value Range 4 × n (n=3–15) ms Programming References 4.7.1 Slot [1-1] 4.7.9 LCO Port [1-4] Feature Guide References None High Speed Pulse Dial—Pulse % Break Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal and make (off-hook) signal in a pulse dial.
Page 277
4.7 Configuration [1] Feature Guide References None High Speed Pulse Dial—Make Width Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse Dial—Pulse % Break on this screen determines the value that can be specified here. Default 20 ms Value Range...
Page 278
4.7 Configuration [1] Programming References 4.7.1 Slot [1-1] 4.7.9 LCO Port [1-4]—Caller ID Detection Feature Guide References None Caller ID—Caller ID Signaling Selects the signaling type of the Caller ID that the telephone company provides. Default Value Range FSK (Frequency Shift Keying), FSK (with Visual Caller ID), DTMF Programming References 4.7.1 Slot [1-1] Feature Guide References...
Page 279
4.7 Configuration [1] Value Range Disable, Enable Programming References 4.7.1 Slot [1-1] Feature Guide References None Caller ID—Caller ID (FSK) END Detection Selects the method used to detect the end of Caller ID information. Default Length + Timer Value Range Length + Timer, Timer Programming References 4.7.1 Slot [1-1]...
4.7 Configuration [1] Default 80 ms Value Range None, 80 × n (n=1–15) ms Programming References 4.7.1 Slot [1-1] Feature Guide References None Caller ID—Caller ID (FSK) Detection Timer Specifies the total time required by the PBX to detect Caller ID information. To enable this setting, Caller ID Signaling on this screen should be assigned to FSK.
4.7 Configuration [1] Feature Guide References None Port Number Indicates the port number (reference only). Default Current port number Value Range Port number Programming References 4.7.1 Slot [1-1] Feature Guide References None Port Status Indicates the port status (reference only). This column offers two ways to open the screen to select the port command: •...
4.7 Configuration [1] Puts the port in service. Default Not applicable. Value Range Not applicable. Programming References 4.7.4 Slot [1-1] DPH Card Property Feature Guide References None Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of repair.
Page 283
4.7 Configuration [1] Programming References 4.7.1 Slot [1-1] Feature Guide References None Takes the card out of service. This enables a temporal non-use of the card, for example, for the purpose of repair. Default Not applicable. Value Range Not applicable. Programming References 4.7.1 Slot [1-1] Feature Guide References...
4.7 Configuration [1] Feature Guide References None Delete Assigns the card type to be deleted from the slot. Default Not applicable. Value Range Not applicable. Programming References 4.7.1 Slot [1-1] Feature Guide References None 4.7.7 Portable Station [1-2] Various portable station (PS) settings can be programmed. A maximum of 28 PS can be registered. PS Registration and De-registration A PS must be registered to the PBX by programming both the PBX and PS before it can be used.
Page 285
4.7 Configuration [1] • If the registration is unsuccessful, the dialog box will show "Registration Error". Click Close. The registration will be terminated. Once the PS is successfully registered, the status of the PS will update to show "Registered". While the registration is executing, it is possible to abort registration by clicking Halt in the step 5 above. However, if the registration is already completed, the registration cannot be aborted and the dialog box will show "Registration Halt: NG".
Page 286
4.7 Configuration [1] Feature Guide References 1.20 Portable Station (PS) Features Extension No. Specifies the extension number of a PS. In Wireless XDP Parallel Mode, the PS can be used as a sub telephone with a wired main telephone (PT/ SLT), and two of them will share one extension number of the main telephone.
4.7 Configuration [1] Programming References None Feature Guide References 1.20.1 Portable Station (PS) Connection Personal Identification Number Specifies the Personal Identification Number (PIN) of the PBX used to avoid unexpected registration to another PBX. Note that the same PIN of the PBX should be registered into the PS, before the PS is registered to the PBX. Default 1234 Value Range...
4.7 Configuration [1] Default In Service (INS) Value Range In Service (INS), Out of Service (OUS) Feature Guide References None 4.7.9 LCO Port [1-4] Various settings can be programmed for each analog CO port. Slot Indicates the slot position (reference only). Default Current slot number Value Range...
4.7 Configuration [1] Default Current status Value Range INS: The port is in service. OUS: The port is out of service. Programming References 4.7.10 LCO Port [1-4] Port Command Feature Guide References None Dialing Mode Selects the type of signal used to dial out to the analog CO line. Default DTMF Value Range...
4.7 Configuration [1] Value Range 80 ms, 160 ms Feature Guide References None Pulse Speed Selects the speed at which pulse dials are sent to the analog CO line. Default Value Range Low, High Feature Guide References None Caller ID Detection Enables the PBX to detect a Caller ID signal from the analog CO line.
4.7 Configuration [1] Flash Time Specifies the length of a flash signal. Default 608 ms Value Range None, 16 × n (n=1–255) ms Feature Guide References None Disconnect Time Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line. Default 1.5 s Value Range...
4.7 Configuration [1] Takes the port out of service. This enables a temporal non-use of the port, for example, for the purpose of repair. Default Not applicable. Value Range Not applicable. Programming References 4.7.9 LCO Port [1-4] Feature Guide References None 4.7.11 Extension Port [1-5] Various settings can be programmed for each extension port.
4.7 Configuration [1] Port Type Indicates the port type (reference only). Default Current port type Value Range APT: APT port (PLC) SLT: SLT port (SLC) Hybrid: Hybrid port (HLC) Feature Guide References None Telephone Type Indicates the connected telephone type (reference only). The number of all connected telephones and Cell Stations can be viewed by clicking Port Type View.
Feature Guide References None Extension Name Specifies the extension name of the port. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 295
Normal: For connecting a PT DSS: For connecting a DSS Console (A maximum of 4 DSS Consoles can be connected to the PBX.) VM (DPT): For connecting a Panasonic VPS through DPT Integration Programming References 4.7.12 Extension Port [1-5] Port Command...
4.7 Configuration [1] Default Value Range 1–4 Feature Guide References None 4.7.12 Extension Port [1-5] Port Command Commands for the extension ports can be programmed. Puts the port in service. Default Not applicable. Value Range Not applicable. Programming References 4.7.11 Extension Port [1-5] Feature Guide References None Takes the port out of service.
4.7 Configuration [1] 4.7.13 Extension Port [1-5] Port Type View Displays the number of connected telephones and Cell Stations (CSs). Type Indicates the types of telephone (reference only). Default Not applicable. Value Range APT, SLT, DSS Console, VM, Other, CS Programming References 4.7.11 Extension Port [1-5] Feature Guide References...
4.8 System [2] System [2] 4.8.1 Date & Time/Daylight Saving—Date & Time [2-1-1] The date and time of the PBX can be programmed. The date and time will be shown on the display of the extensions (e.g., PT, PS). Date & Time—Year, Month, Date, Week, Hour, Second Indicates the current time and date.
Page 299
4.8 System [2] Feature Guide References 2.3.4 Automatic Time Adjustment Start Date—Year, Month, Day Specifies the Daylight Saving Time start date. Default Year: 2003 (For Daylight Saving Time number 1. The year advances by one for the subsequent Daylight Saving Times.) Month: 4 Day: Day of the first Sunday of the month Value Range...
4.8 System [2] 4.8.3 PBX Operator [2-2] For each time mode (day/lunch/break/night), a number (extension number or floating extension number of incoming call distribution group) can be programmed to be designated as the PBX operator. Specifies the number (extension number or floating extension number of incoming call distribution group) to be designated as the PBX operator in the day mode.
4.8 System [2] Default Value Range Max. 4 digits (consisting of 0–9) Programming References 4.8.8 Time Service—Week Table [2-5-1] 4.8.10 Numbering Plan—Extension [2-6-1] 4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1] Feature Guide References 2.2.5 Operator Features Night Specifies the number (extension number or floating extension number of incoming call distribution group) to be designated as the PBX operator in the night mode.
4.8 System [2] Programming References None Feature Guide References 1.12.4 Music on Hold Music on Hold Selects the audio source for Music on Hold. Default Value Range Tone, BGM Programming References None Feature Guide References 1.12.4 Music on Hold Sound on Transfer Selects the audio source for Sound on Transfer (either the same music source chosen for the Music on Hold, or ringback tone).
4.8 System [2] Default 40 s Value Range 1–240 s Programming References None Feature Guide References 1.1.1.4 Intercept Routing Hold Recall Timer Specifies the length of time until the holding extension receives a Hold Recall ring when a held call remains unretrieved.
Page 304
4.8 System [2] Call Park Recall Timer Specifies the length of time a parked call waits to be retrieved, before the Transfer Recall destination assigned to the parking extension hears a Call Park Recall ring. Default 60 s Value Range 1–240 s Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]...
Page 305
4.8 System [2] Feature Guide References 1.6.1.6 Hot Line Extension First Digit Timer Specifies the length of time within which the first digit of a feature number (e.g., extension number) must be dialed before reorder tone is heard. Default 10 s Value Range 0–15 s Programming References...
Page 306
4.8 System [2] Feature Guide References None Analog CO Inter Digit Timer to Mute Caller's Voice during Dialing Specifies the length of time within which subsequent digits of a telephone number must be sent to an analog CO line before the PBX recognizes end of dialing and cancels muting caller's voice sent to the analog CO line.
4.8 System [2] Feature Guide References 1.23.1 Extension Personal Identification Number (PIN) On hook Waiting Time for call from VM to CO Specifies the length of time from when the VPS seizes a CO line (for example, to transfer a call) until the VPS goes on hook.
Page 308
4.8 System [2] Value Range 0.0–12.0 s Programming References 4.11.4 DISA—Message Setting [5-3-2] Feature Guide References 1.15.6 Direct Inward System Access (DISA) DISA First Digit Timer for Routing to Operator when No Dial Specifies the length of time after the OGM in which the caller must begin dialing before the call is redirected to the operator.
Page 309
4.8 System [2] DISA Intercept Timer (Day/Lunch/Break/Night) Specifies the length of time until a DISA call is intercepted and redirected to the intercept routing destination after the original destination receives the call in each time mode. Default 40 s Value Range 0–60 s Programming References 4.9.1 Trunk Group—TRG Settings [3-1-1]—Intercept—Intercept Destination—Day, Lunch, Break, Night...
4.8 System [2] Programming References 4.11.4 DISA—Message Setting [5-3-2] Feature Guide References 1.15.6 Direct Inward System Access (DISA) DISA CO-to-CO Line Call Prolong Time Specifies the length of time a CO-to-CO line call on the DISA line can be prolonged each time the caller prolongs the call.
Page 311
4.8 System [2] Programming References 4.11.4 DISA—Message Setting [5-3-2] Feature Guide References 1.15.6 Direct Inward System Access (DISA) Doorphone Call Duration Time Specifies the length of time until the ringing stops and the call is canceled when there is no answer. Default 30 s Value Range...
Page 312
4.8 System [2] Programming References 4.11.1 Doorphone [5-1] Feature Guide References 1.15.2 Door Open Timed Reminder : Repeat Counter Specifies the number of times the alarm is repeated. Default Value Range 1–15 Programming References None Feature Guide References 1.23.4 Timed Reminder Timed Reminder : Interval Time Specifies the length of time between the repeated alarms.
Page 313
4.8 System [2] Programming References None Feature Guide References 1.23.4 Timed Reminder Unattended Conference : Recall Start Time Specifies the length of time until the conference originator receives an Unattended Conference Recall tone. Default 10 min Value Range 0–60 min Programming References None Feature Guide References...
4.8 System [2] Default 15 s Value Range 0–240 s Programming References None Feature Guide References 1.13.1.2 Conference 4.8.7 Timers & Counters—Miscellaneous [2-4-3] Various system timers and counters can be programmed. Busy Tone / DND Tone Continuation Time Specifies the length of time a busy/DND tone is heard when a call is made to an extension in busy status or DND mode.
Page 315
4.8 System [2] Feature Guide References 1.5.2 Automatic Extension Release Reorder Tone Continuation Time for PT Hands Free Mode Specifies the length of time a reorder tone is heard from the built-in speaker of a PT in hands-free mode. The PT will return to idle status when this timer expires. This setting is applied to a PS as well as a PT. Default Value Range 1–15 s...
Page 316
4.8 System [2] DTMF Inter Digit Pause while talking Specifies the length of time between DTMF signals when numbers are dialed in succession from a PT or PS during a conversation. Default 112 ms Value Range 64 + 16 × n (n=0–15) ms Feature Guide References None Pause Time while talking...
4.8 System [2] Visual Caller ID Display Timer Specifies the length of time the Caller ID number, with the Call Waiting tone offered by an analog line from the telephone company, is shown on the display. The Caller ID number flashes on the display twice for five seconds at 15-second intervals.
Page 318
4.8 System [2] Day 1 Start—Setting Enables the setting of the Day 1 start time. Default Enable Value Range Disable, Enable Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Day 1 Start—Hour Specifies the hour of the Day 1 start time.
Page 319
4.8 System [2] Feature Guide References 2.2.4 Time Service Lunch Start—Setting Enables the setting of the Lunch start time. Default Disable Value Range Disable, Enable Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Lunch Start—Hour Specifies the hour of the Lunch start time.
Page 320
4.8 System [2] Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Day 2 Start—Setting Enables the setting of the Day 2 start time (Lunch end time). Default Disable Value Range Disable, Enable Programming References 4.8.14 Class of Service—COS Settings [2-7-1]...
Page 321
4.8 System [2] Value Range 0–59 Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Night Start—Setting Enables the setting of the Night start time. Default Enable Value Range Disable, Enable Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2]...
Page 322
4.8 System [2] Default Value Range 0–59 Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Break Break start and end times can be programmed for each day of the week for Time Tables that contain breaks. Break 1, 2, 3 Start—Setting Enables the setting of each break mode start time.
Page 323
4.8 System [2] Feature Guide References 2.2.4 Time Service Break 1, 2, 3 Start—Minute Specifies the minute of each break mode start time. Default Value Range 0–59 Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Break 1, 2, 3 End (Day Mode)—Setting Enables the setting of each break mode end time (back to day mode).
4.8 System [2] Programming References 4.8.14 Class of Service—COS Settings [2-7-1] 4.9.3 Extension Group [3-2] Feature Guide References 2.2.4 Time Service Break 1, 2, 3 End (Day Mode)—Minute Specifies the minute of each break mode end time. Default Value Range 0–59 Programming References 4.8.14 Class of Service—COS Settings [2-7-1]...
Page 325
4.8 System [2] Start Date—Month Specifies the month of the holiday start date. Default Value Range 1–12 Programming References None Feature Guide References 2.2.4 Time Service Start Date—Day Specifies the day of the holiday start date. Default Value Range 1–31 Programming References None Feature Guide References...
4.8 System [2] End Date—Day Specifies the day of the holiday end date. Default Value Range 1–31 Programming References None Feature Guide References 2.2.4 Time Service 4.8.10 Numbering Plan—Extension [2-6-1] The leading numbers and the number of additional digits of the extension numbers for a maximum of 32 different extension numbering schemes can be programmed.
4.8 System [2] Additional Digits Specifies the number of additional digits following the leading number. Default Value Range None: 0 digit X: 1 digit XX: 2 digits Programming References None Feature Guide References 2.3.5 Flexible Numbering/Fixed Numbering 4.8.11 Numbering Plan—Feature [2-6-2] Feature numbers to access various PBX features can be programmed.
Page 328
4.8 System [2] Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.9.2 Trunk Group—Local Access Priority [3-1-2] Feature Guide References 1.5.5.3 CO Line Access 2.3.5 Flexible Numbering/Fixed Numbering Trunk Group Access Specifies the feature number used for making a CO line call using an idle CO line from a certain CO line group.
Page 329
4.8 System [2] Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.10.3 Wired Extension—Speed Dial [4-1-3] 4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1] Feature Guide References 1.6.1.4 Speed Dialing—Personal/System 2.3.5 Flexible Numbering/Fixed Numbering Personal Speed Dialing - Programming Specifies the feature number used for programming Personal Speed Dialing numbers at an extension.
4.8 System [2] Group Paging Specifies the feature number used for paging a certain paging group. Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.9.5 Paging Group [3-4] Feature Guide References 1.14.1 Paging 2.3.5 Flexible Numbering/Fixed Numbering External BGM On / Off Specifies the feature number, available for manager extensions, used for turning on or off the external BGM.
4.8 System [2] 4.8.14 Class of Service—COS Settings [2-7-1]—Options—Manager Feature Guide References 1.15.5 Outgoing Message (OGM) 2.3.5 Flexible Numbering/Fixed Numbering Single-CO Line Access Specifies the feature number used for making a CO line call using a certain CO line. Default Value Range Max.
Page 332
4.8 System [2] Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 3—Call Pickup Deny 4.10.7 Portable Station—Extension Settings [4-2-1]—Option 3—Call Pickup Deny Feature Guide References 1.4.1.3 Call Pickup 2.3.5 Flexible Numbering/Fixed Numbering TAFAS Answer Specifies the feature number used for answering a CO line call notified through an external pager.
4.8 System [2] Automatic Callback Busy Cancel Specifies the feature number used for canceling Automatic Callback Busy. Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.7.1 Automatic Callback Busy (Camp-on) 2.3.5 Flexible Numbering/Fixed Numbering User Remote Operation / Walking COS / Verified Code Specifies the feature number used for changing the COS of an extension temporarily, and also changing the...
Page 334
4.8 System [2] Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—Options—Accept Wireless XDP Parallel Set by Other PS Feature Guide References 1.20.3 Wireless XDP Parallel Mode 2.3.5 Flexible Numbering/Fixed Numbering Account Code Entry Specifies the feature number used for entering the Account Code. Default Value Range Max.
Page 335
4.8 System [2] Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.12.1 Call Hold 2.3.5 Flexible Numbering/Fixed Numbering Call Park / Call Park Retrieve Specifies the feature number used for holding a call in a parking zone or retrieving a call held in a parking zone.
4.8 System [2] Door Open Specifies the feature number used for opening a door. Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.11.1 Doorphone [5-1] Feature Guide References 1.15.2 Door Open 2.3.5 Flexible Numbering/Fixed Numbering External Relay Access Specifies the feature number used for activating a relay.
Page 337
4.8 System [2] 2.3.5 Flexible Numbering/Fixed Numbering Message Waiting Set / Cancel / Call Back Specifies the feature number used for setting or canceling Message Waiting, or calling back the caller. Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References...
Page 338
4.8 System [2] Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND) 2.3.5 Flexible Numbering/Fixed Numbering FWD/DND Set / Cancel: Call from Extension Specifies the feature number used for setting or canceling FWD/DND for incoming intercom calls. Default *712 Value Range...
Page 339
4.8 System [2] Group FWD Set / Cancel: Call from CO & Extension Specifies the feature number used for setting or canceling FWD for incoming CO line and intercom calls to an incoming call distribution group. Default *714 Value Range Max.
Page 340
4.8 System [2] Programming References 4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1] Feature Guide References 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND) 2.3.5 Flexible Numbering/Fixed Numbering Call Pickup Deny Set / Cancel Specifies the feature number used for setting or canceling Call Pickup Deny (i.e., preventing or allowing the other extensions to pick up calls to your extension).
Page 341
4.8 System [2] Default *727 Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.23.3 Walking Extension 2.3.5 Flexible Numbering/Fixed Numbering Data Line Security Set / Cancel Specifies the feature number used for setting or canceling the Data Line Security (i.e., preventing or allowing signals from other extensions during data transmission).
Page 342
4.8 System [2] 2.3.5 Flexible Numbering/Fixed Numbering Call Waiting Mode: Call from CO Specifies the feature number used for setting or canceling a Call Waiting from a CO line, doorphone, or a call via an incoming call distribution group. Default *732 Value Range Max.
Page 343
4.8 System [2] Programming References 4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1] Feature Guide References 1.2.2.6 Log-in/Log-out 2.3.5 Flexible Numbering/Fixed Numbering Log-in / Log-out Specifies the feature number used for joining or leaving the incoming call distribution group. Default *736 Value Range Max.
Page 344
4.8 System [2] Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.17.2 Absent Message 2.3.5 Flexible Numbering/Fixed Numbering BGM Set / Cancel Specifies the feature number used for setting or canceling the BGM heard through the telephone speaker while on-hook.
Page 345
4.8 System [2] Default *760 Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.23.4 Timed Reminder 2.3.5 Flexible Numbering/Fixed Numbering Extension Lock Set / Cancel Specifies the feature number used for locking or unlocking the extension to make certain CO line calls and change the forward destination.
Page 346
4.8 System [2] 2.3.5 Flexible Numbering/Fixed Numbering Remote Extension Lock Off Specifies the feature number, available for manager extensions, used for unlocking other extensions. Default *782 Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—Options—Manager Feature Guide References 1.8.2 Extension Dial Lock 2.3.5 Flexible Numbering/Fixed Numbering...
4.8 System [2] Feature Guide References 1.23.2 Extension Feature Clear 2.3.5 Flexible Numbering/Fixed Numbering Extension PIN Set / Cancel Specifies the feature number used for setting a PIN to an extension. Default *799 Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References...
4.8 System [2] Default Not stored. Value Range Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash]) Programming References None Feature Guide References 1.6.1.5 Quick Dialing 2.3.5 Flexible Numbering/Fixed Numbering 4.8.13 Numbering Plan—B/NA DND Call Feature [2-6-4] Feature numbers used to access various PBX features can be programmed.
Page 349
4.8 System [2] Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—Main—Executive Busy Override 4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 3—Executive Override Deny 4.10.7 Portable Station—Extension Settings [4-2-1]—Option 3—Executive Override Deny Feature Guide References 1.7.2 Executive Busy Override 2.3.5 Flexible Numbering/Fixed Numbering Alternate Calling - Ring / Voice Specifies the feature number for allowing a caller to change the called extension's preset call receiving method to ring tone or voice.
Page 350
4.8 System [2] Default Value Range 1 digit (0–9, *, or #) Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—Main—Call Monitor 4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 3—Executive Override Deny 4.10.7 Portable Station—Extension Settings [4-2-1]—Option 3—Executive Override Deny Feature Guide References 1.7.3 Call Monitor 2.3.5 Flexible Numbering/Fixed Numbering Automatic Callback Busy...
4.8 System [2] Feature Guide References 1.1.3.3 Call Waiting 1.3.1.3 Do Not Disturb (DND) 2.3.5 Flexible Numbering/Fixed Numbering 4.8.14 Class of Service—COS Settings [2-7-1] Each extension, doorphone port, incoming call distribution group, and CO line group belongs to a certain COS.
4.8 System [2] 4.13.1 Denied Code [7-1] 4.13.2 Exception Code [7-2] Feature Guide References 1.8.1 Toll Restriction (TRS) TRS Level on Extension Lock Specifies the TRS level for making CO line calls when an extension is locked. Default Value Range 1: Allows all CO line calls 2–6: Restricts CO line calls according to the combination of the Denied and Exception Code Tables 7: Restricts all CO line calls...
Page 353
4.8 System [2] Extension-CO Line Call Duration Limit Enables the extension-to-CO line call duration feature. The length of the call duration can be programmed. Default Disable Value Range Disable, Enable Programming References 4.8.21 System Options—Option 2 [2-9-2]—Extension - CO Call Limitation 4.9.1 Trunk Group—TRG Settings [3-1-1]—Main—COS 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—COS...
4.8 System [2] 4.10.2 Wired Extension—FWD/DND [4-1-2] 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—COS 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD) Main The use of features related to extension operations can be programmed for each COS. COS Name Specifies the name of the COS.
4.8 System [2] Door Unlock Enables the authorization to open the door. Default Enable Value Range Disable, Enable Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—COS Feature Guide References 1.15.2 Door Open Call Monitor Enables the authorization for listening to a busy extension's conversation. Default Disable Value Range...
4.8 System [2] Feature Guide References None Time Service Switch Enables the authorization to switch time modes manually. Default Disable Value Range Disable, Enable Programming References 4.8.8 Time Service—Week Table [2-5-1] 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—COS Feature Guide References 2.2.4 Time Service Executive Busy Override Deny...
Page 358
4.8 System [2] Value Range Disable: An extension cannot set call forwarding for any group. Enable-All: An extension can set call forwarding for all groups. Enable-Group: An extension can only set call forwarding for the group to which the extension belongs. Programming References 4.9.7 Incoming Call Distribution Group—Member [3-5-2] 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS...
Page 359
4.8 System [2] Feature Guide References 1.15.6 Direct Inward System Access (DISA) Accept Wireless XDP Parallel Set by Other PS Enables the authorization to allow Wireless XDP Parallel Mode to be set by a PS. Default Enable Value Range Disable, Enable Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS Feature Guide References...
4.8 System [2] 4.8.16 Class of Service—Internal Call Block [2-7-3] Internal Call Block determines the restrictions placed on making intercom calls. The extensions, incoming call distribution groups, and doorphones belonging to a certain COS can be programmed to not receive intercom calls from those belonging to a certain COS.
4.8 System [2] Feature Guide References 1.1.3.2 Ring Tone Pattern Selection 4.8.18 Ring Tone Patterns—Call from Doorphone [2-8-2] Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone ports the calls come through. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern table can be selected for use by an extension.
Page 363
4.8 System [2] Feature Guide References 1.1.3.2 Ring Tone Pattern Selection Timed Reminder—Ring Tone Pattern Table 1–8 Specifies the ring tone pattern for alarm ringing by Timed Reminder. Default Triple Value Range Single, Double, Triple Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table Feature Guide References 1.1.3.2 Ring Tone Pattern Selection...
4.8 System [2] Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table 4.10.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table Feature Guide References 1.1.3.2 Ring Tone Pattern Selection External Sensor—Ring Tone Pattern Table 1–8 Specifies the ring tone pattern for calls from an external sensor. Default Triple Value Range...
Page 365
4.8 System [2] Date Display Selects the order month and date are shown on the displays of extensions. Default Month-Date Value Range Date-Month, Month-Date Feature Guide References None Password / PIN Display Mode Selects to hide or show passwords or PINs (Personal Identification Number) on the displays of extensions while entering them.
Page 366
4.8 System [2] Default On (Solid) Value Range On (Solid): Red on Flash: Slow red flashing Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW SCO button operation during CO conversation Selects the function of the S-CO button while there is an ongoing CO line call.
4.8 System [2] FWD/DND press mode on the idle status Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode, and the mode cannot be changed.) Default FWD/DND Cycle Switch Mode...
Page 368
4.8 System [2] Default Disconnect Value Range Disconnect, Hold Programming References 4.10.4 Wired Extension—Flexible Key [4-1-4] 4.10.9 Portable Station—Flexible Key [4-2-3] Feature Guide References 1.12.1 Call Hold Call Hold Mode Selects which extension can retrieve a held call or a call that is transferred by Call Transfer without Announcement feature.
Page 369
4.8 System [2] System CODEC Selects the CODEC type for PS. Default Mu-Law Value Range A-Law, Mu-Law Feature Guide References None Extension Clear : Call Waiting Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature is performed. Default Clear Value Range...
Page 370
4.8 System [2] Default Clear Value Range No Clear, Clear Programming References None Feature Guide References 1.23.2 Extension Feature Clear Extension - CO Call Limitation Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing and incoming calls.
4.8 System [2] Automatic Time Adjustment by Caller ID (FSK) Service Enables the PBX to adjust its clock everyday according to the time information that the network provides with the first call after 3:05 AM. Default Enable Value Range Disable, Enable Programming References None Feature Guide References...
Page 372
4.8 System [2] Programming References None Feature Guide References 1.24.2 Confirmation Tone Confirmation Tone 3-1 : Start Talking after Making Call Enables the PBX to send Confirmation Tone 3-1. Confirmation Tone 3-1 is heard from an extension when, for example, it pages another extension. Default Enable Value Range...
4.8 System [2] Value Range Disable, Enable Programming References None Feature Guide References 1.24.2 Confirmation Tone Confirmation Tone 4-2 : Finish Conference Enables the PBX to send Confirmation Tone 4-2. Confirmation Tone 4-2 is heard from an extension when a party leaves a conference call.
Page 374
4.8 System [2] Default Enable Value Range Disable, Enable Programming References None Feature Guide References 1.24.1 Dial Tone Dial Tone Type for Extension Selects the dial tone the PBX sends to the extensions to inform of the features activated on them. Default Type A Value Range...
Page 375
4.8 System [2] Default Enable Value Range Disable, Enable Feature Guide References None Echo Cancel Control for CO to CO Enables the use of the ECHO card (installed in an Option Slot) for CO-to-CO line calls. Default Enable Value Range Disable, Enable Feature Guide References None...
4.8 System [2] Feature Guide References 1.23.4 Timed Reminder Transfer to busy extension without BSS operation Enables a transferred call to queue when the transfer destination is busy. Default Disable Value Range Disable: The call is not transferred. (If the transfer destination sets call waiting notification feature, it is possible to inform of transferring a call.) Enable: The transferred call queues to be answered for a time period specified in Transfer Recall Timer in Timers &...
Page 377
4.8 System [2] Radio System ID Indicates the radio system ID used to register a PS (reference only). Default Radio system ID Value Range Not applicable. Feature Guide References None Call Pickup by DSS Key for Direct Incoming Call Specifies whether a DSS button will light up or flash when a call rings at the specified extension. To enable this setting, DSS Key mode for Incoming call on this screen must be set to ON or Flash.
4.8 System [2] DSS Key mode for Incoming call Enables the use of a DSS button to pick up an incoming call to another extension or an ICD group. Default Value Range ON or Flash, OFF Programming References None Feature Guide References 1.4.1.3 Call Pickup Send CLIP of Held Party when Transfer Enables the transfer of the related CLIP information when a party on hold is transferred.
4.8 System [2] Programming References 4.9.5 Paging Group [3-4] Feature Guide References 1.14.1 Paging MOH (Music On Hold) Specifies the music volume on the External BGM. Default 0 dB Value Range -11–11 dB Programming References 4.8.4 BGM / Music on Hold [2-3] Feature Guide References 1.15.4 Background Music (BGM) 4.8.25 Extension Caller ID [2-11]...
Page 380
4.8 System [2] Extension Caller ID Modulation Type Specifies the modulation frequency to be used when sending Caller ID information to an SLT. Default Bell202(Bellcore) Value Range V.23(ETSI), Bell202(Bellcore) Programming References None Feature Guide References 1.16.1 Caller ID Channel Seizure Signal bits Specifies the number of seizure bits to send when sending Caller ID information to an SLT.
Page 381
4.8 System [2] Channel Seizure Wait Time Specifies the length of time the PBX waits before starting to send the seizure signal following the first ring when sending Caller ID information to an SLT. Default 512 ms Value Range 64 × n (n=5–35) ms Programming References None Feature Guide References...
Page 382
4.8 System [2] Feature Guide References 1.16.1 Caller ID Send Name of Extension Caller ID Enables the PBX to send caller's name of an incoming call when sending Caller ID information to an SLT. Default Enable Value Range Disable, Enable Programming References None Feature Guide References...
CO lines. A maximum of 64 CO line groups can be programmed. Main Group Name Specifies the name of the CO line group for programming reference. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 384
4.9 Groups [3] Line Hunting Order Specifies the CO line hunting sequence for the CO line group. The hunting sequence can be programmed to start from the lowest or highest numbered CO lines, or to rotate uniformly among all CO lines. Default High ->...
Page 385
2.2.2 Group Intercept Group Name Specifies the name of the CO line group for programming reference. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Host PBX Access Code Group Name Specifies the name of the CO line group for programming reference. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
2.2.2 Group Tone Detection Group Name Specifies the name of the CO line group for programming reference. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.9 Groups [3] Value Range Disable, Enable Programming References 4.11.3 DISA—System Setting [5-3-1] 4.15.1 CO Line Setting [9-1] Feature Guide References 1.15.6 Direct Inward System Access (DISA) 2.2.2 Group DISA Tone Detection—Cyclic Enables the disconnection of a DISA-originated CO-to-CO line call by cyclic signal detection. Default Enable Value Range...
A maximum of 8 tenants can be programmed. Extension Group Name Specifies the name of the extension group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.9 Groups [3] 4.9.4 Call Pickup Group [3-3] Extensions can be assigned to a call pickup group according to their extension group. One extension group can belong to multiple call pickup groups. A maximum of 64 call pickup groups can be programmed. Extension Group 1-16 Call Pickup Group Name Specifies the name of the call pickup group.
4.9 Groups [3] Extension Group 17-32 Call Pickup Group Name Specifies the name of the call pickup group. Default Not stored. Value Range Max. 20 characters Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1] 4.10.7 Portable Station—Extension Settings [4-2-1] Feature Guide References 1.4.1.3 Call Pickup 2.2.2 Group Extension Group 17–32...
4.9 Groups [3] Extension Group 1-16 Paging Group Name Specifies the name of the paging group. Default Not stored. Value Range Max. 20 characters Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1] 4.10.7 Portable Station—Extension Settings [4-2-1] Feature Guide References 1.14.1 Paging 2.2.2 Group Extension Group 1–16 Specifies whether the extension group belongs to the corresponding paging group.
Page 393
4.9 Groups [3] Default Not stored. Value Range Max. 20 characters Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1] 4.10.7 Portable Station—Extension Settings [4-2-1] Feature Guide References 1.14.1 Paging 2.2.2 Group Extension Group 17–32 Specifies whether the extension group belongs to the corresponding paging group. Default Extension Group 17–32: ON for the same-numbered paging group and group 32;...
4.9 Groups [3] 4.10.7 Portable Station—Extension Settings [4-2-1] Feature Guide References 1.14.1 Paging 2.2.2 Group External Pager 1 Specifies whether the external pager belongs to the corresponding paging group. Default ON for all paging groups Value Range ON, OFF Programming References 4.10.1 Wired Extension—Extension Settings [4-1-1] 4.10.7 Portable Station—Extension Settings [4-2-1] Feature Guide References...
Page 395
4.9 Groups [3] Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
Page 396
4.9 Groups [3] FWD Mode Specifies whether the extension rings in FWD mode when a call comes in to the incoming call distribution group. Default Ring Value Range No Ring, Ring Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.2.2.2 Group Call Distribution DND Mode...
Page 397
4.9 Groups [3] Programming References 4.8.4 BGM / Music on Hold [2-3] 4.8.8 Time Service—Week Table [2-5-1] 4.12.7 Tenant [6-6]—Music on Hold Feature Guide References 1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain extensions are restricted as determined by the Internal Call Block feature.
Page 398
4.9 Groups [3] Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
Page 399
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.9 Groups [3] Programming References 4.8.8 Time Service—Week Table [2-5-1] Feature Guide References 1.2.2.5 Overflow Feature Time out & Manual Queue Redirection—Overflow Time Specifies the length of time calls wait in a queue before they are redirected to the overflow destination. Default None Value Range...
Page 401
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 402
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.9 Groups [3] Extension No Answer Time Specifies the length of time a call queues at an extension before it is redirected to the next member extension of the incoming call distribution group in UCD or Priority Hunting distribution method. Default None Value Range...
Page 404
4.9 Groups [3] Feature Guide References 1.2.2.2 Group Call Distribution Last Extension Log-out Allows or prohibits the last extension logged-in to the incoming call distribution group to log-out. Default Enable Value Range Disable, Enable Programming References None Feature Guide References 1.2.2.6 Log-in/Log-out VIP Call Mode Enables the VIP Call mode to prioritize incoming call distribution groups.
Page 405
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Group Name Specifies the name of the incoming call distribution group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 406
4.9 Groups [3] Programming References None Feature Guide References 1.16.2 Incoming Call Log Group FWD for Call from CO—Setting Sets or cancels the FWD feature for incoming CO line calls directed to the incoming call distribution group. Default Value Range Off, On Programming References None...
4.9 Groups [3] Programming References None Feature Guide References 1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW Group FWD for Call from Extension—Destination Specifies the forward destination of incoming intercom calls directed to the incoming call distribution group. Default Not stored. Value Range Max.
4.9 Groups [3] Delayed Ring Specifies the Delayed Ringing setting of each member. (Applicable when the call distribution method of the incoming call distribution group is set to Ring.) Default Immediate Value Range Immediate, 1–6 Rings, No Ring Programming References None Feature Guide References 1.2.2.2 Group Call Distribution...
4.9 Groups [3] Value Range None: Redirects the call to the next sequence Overflow: Redirects the call to the overflow destination when there is no answer Disconnect: Disconnects the line Sequence 01–16: Redirects the call to a different sequence OGM 01–32: Sends a certain OGM Wait 5 ×...
1.2.1 Idle Extension Hunting 4.9.10 VM(DPT) Group—System Setting [3-7-1] A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to hybrid/APT ports of the PBX. The hybrid/APT ports that are connected to the VPS are called a VM (DPT) Group.
Page 411
4.9 Groups [3] Call Waiting on VM Group Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is not sent to any VM port.) Default Enable Value Range Disable, Enable Programming References 4.7.11 Extension Port [1-5] Feature Guide References...
Specifies the name of the VM (DPT) group, which will be shown on the display of the extension that has called the VM (DPT) group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.9.12 VM(DTMF) Group—System Setting [3-8-1] A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports of the PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. A maximum of 2 VM (DTMF) Groups can be programmed.
Page 414
4.9 Groups [3] VM DTMF Status Signal—Reorder Tone Specifies the DTMF status signal the PBX sends to the VPS when the dialed number is invalid. Default Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.19.1 Voice Mail (VM) Group 1.19.3 Voice Mail DTMF Integration...
Page 415
4.9 Groups [3] Feature Guide References 1.19.1 Voice Mail (VM) Group 1.19.3 Voice Mail DTMF Integration VM DTMF Status Signal—Confirm Specifies the DTMF status signal the PBX sends to the VPS when a certain feature (e.g., Message Waiting) has been successfully set or canceled on an extension. Default Value Range Max.
Page 416
4.9 Groups [3] Value Range Max. 4 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.19.1 Voice Mail (VM) Group 1.19.3 Voice Mail DTMF Integration VM DTMF Status Signal—FWD to VM Busy Tone Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the VPS and all ports of the VPS are busy.
Page 417
4.9 Groups [3] VM DTMF Command—Recording Message Specifies the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or transferred to the VPS, so that the caller can leave a message in a certain mailbox. Default Value Range Max.
Page 418
4.9 Groups [3] Feature Guide References 1.19.3 Voice Mail DTMF Integration VM DTMF Command—Switching to VM Specifies the DTMF command the PBX sends to the VPS when in the AA Service Mode to activate the VM Service Mode instead. Default Value Range Max.
Page 419
4.9 Groups [3] Feature Guide References 1.19.3 Voice Mail DTMF Integration Timing—Waiting Time before Sending Follow on ID Specifies the length of time the PBX waits before sending the Follow on ID to the VPS after the VPS has answered a call. Default 1.5 s Value Range...
Page 420
4.9 Groups [3] Programming References None Feature Guide References 1.19.1 Voice Mail (VM) Group Others—FWD to the VPS Sequence Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to the VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also possible to send no DTMF signal to the VPS.
4.9 Groups [3] Default Extension Number Value Range Extension Number, Programmed Mailbox Number Programming References 4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]—Miscellaneous—Programmed Mailbox No. 4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 1—Programmed Mailbox No. 4.10.7 Portable Station—Extension Settings [4-2-1]—Option 1—Programmed Mailbox No. Feature Guide References 1.19.3 Voice Mail DTMF Integration Others—Message Waiting Lamp Control...
Page 422
Specifies the name of the VM (DTMF) group, which will be shown on the display of the extension that has called the VM (DTMF) group. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
PS ring group when Incoming Trunk Call Information Display on this screen is set to Called Number. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 424
4.9 Groups [3] Programming References None Feature Guide References 1.20.2 PS Ring Group Incoming Trunk Call Information Display Specifies the information of the incoming CO line call to be shown on the displays of the PSs that belong to the PS ring group. If the caller's name or called party's name is not recognized, the telephone number will be shown.
4.10 Extension [4] 4.10 Extension [4] 4.10.1 Wired Extension—Extension Settings [4-1-1] For each slot in which an extension card is installed, a certain number of extension ports are displayed. For each extension port, various extension settings can be assigned. Main Slot Indicates the slot position of each extension card (reference only).
Page 426
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 427
4.10 Extension [4] Telephone Type Indicates the type of telephone connected to the extension port (reference only). Default Current connected telephone type Value Range APT: APT is connected. DSS: DSS Console is connected. VM: VPS is connected. SLT: SLT is connected (or no telephone is connected to the Hybrid or SLT port). CS: CS is connected.
Page 428
4.10 Extension [4] Programming References None Feature Guide References 2.2.2 Group Specifies the COS of the extension. Default Value Range 1–64 Programming References 4.8.14 Class of Service—COS Settings [2-7-1] Feature Guide References 2.2.1 Class of Service (COS) Ring Pattern Table Specifies the Ring Tone Pattern Table to be used by the extension.
Page 429
4.10 Extension [4] Default Current slot number Value Range Slot number Programming References 4.7.1 Slot [1-1] Feature Guide References None Port Indicates the port number (reference only). Default Current port number Value Range Port number Programming References 4.7.11 Extension Port [1-5] Feature Guide References None Extension Number...
Page 430
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 431
4.10 Extension [4] Feature Guide References 1.19.3 Voice Mail DTMF Integration Transfer Recall Destination Specifies the transfer recall destination when an extension user transfers a call with the Call Transfer without Announcement feature and the transferred call is not answered within a certain time period. Default Not stored.
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 433
4.10 Extension [4] Value Range Max. 10 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.23.1 Extension Personal Identification Number (PIN) ARS Itemized Code Specifies the itemized billing code used by the ARS feature for identifying the calls made from the extension for accounting and billing purposes.
Page 434
4.10 Extension [4] Default Value Range Off, On Programming References None Feature Guide References 1.1.3.3 Call Waiting Pickup Dial Set Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is dialed automatically after going off-hook by the Hot Line feature. Default Value Range Off, On...
Page 435
4.10 Extension [4] Default Value Range Off, On Programming References None Feature Guide References 1.10.4 Data Line Security Option 3 Slot Indicates the slot position of each extension card (reference only). Default Current slot number Value Range Slot number Programming References 4.7.1 Slot [1-1] Feature Guide References None...
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 437
Specifies the Personal Absent Message which, unlike System Absent Message, is a customized message used only by the certain extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 438
4.10 Extension [4] Default Current slot number Value Range Slot number Programming References 4.7.1 Slot [1-1] Feature Guide References None Port Indicates the port number (reference only). Default Current port number Value Range Port number Programming References 4.7.11 Extension Port [1-5] Feature Guide References None Extension Number...
Page 439
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 440
4.10 Extension [4] Programming References 4.10.4 Wired Extension—Flexible Key [4-1-4] Feature Guide References 1.4.1.2 Line Preference—Incoming Intercom Call by Voice Selects the method of receiving intercom calls. When Deny Voice Call is selected, the called party always receives calls by a ring tone: the caller cannot change the called party's call receiving method. Default Tone Call Value Range...
4.10 Extension [4] Value Range Stop Record, Keep Record Programming References None Feature Guide References 1.19.2 Voice Mail DPT (Digital) Integration LCS Answer Mode Specifies whether the extension's mailbox is monitored in Hands-free or Private mode. Default Hands free Value Range Hands free: Monitor through the built-in speaker Private: Monitor through the handset or the built-in speaker after hearing an alarm tone Programming References...
Page 442
4.10 Extension [4] Default Current slot number Value Range Slot number Programming References 4.7.1 Slot [1-1] Feature Guide References None Port Indicates the port number (reference only). Default Current port number Value Range Port number Programming References 4.7.11 Extension Port [1-5] Feature Guide References None Extension Number...
Page 443
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 444
4.10 Extension [4] Key Pad Tone Specifies whether the key pad tones are heard when dialing. Default Value Range Off, On Feature Guide References None Automatic Answer for CO Call Enables the extension user to answer an incoming CO line call automatically after a certain number of rings without going off-hook, when Hands-free Answerback has been set on the extension.
Page 445
4.10 Extension [4] Flexible Key Programming Mode Specifies whether the extension user can modify all flexible CO buttons without limitation, or only the One- touch Dialing buttons. When the mode is set to One-touch Dial Only, there is no need to enter "2" before the number.
Page 446
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
4.10 Extension [4] Programming References None Feature Guide References 1.16.2 Incoming Call Log Paging Deny Enables the prevention of being paged by other extensions. Default Disable Value Range Disable, Enable Programming References None Feature Guide References 1.14.1 Paging Flash mode during CO Conversation Selects the function of the FLASH/RECALL button during a CO line conversation.
Page 448
4.10 Extension [4] Programming References None Feature Guide References 1.16.2 Incoming Call Log Group CW w/o Tone (Ring after Call) Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the time of going on-hook after a call. Default Enable Value Range...
Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 450
4.10 Extension [4] Default Disable Value Range Disable, Enable Programming References 4.8.25 Extension Caller ID [2-11]—Extension Caller ID Resource-1, 2 Feature Guide References 1.16.1 Caller ID Incoming Call Wait Timer for Extension Caller ID Specifies the length of time the ringing for a call is delayed when the call follows immediately after the previous unanswered call.
Page 451
4.7.12 Extension Port [1-5] Port Command Feature Guide References None Extension Name Specifies the name of the extension. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Feature Guide...
Page 452
4.10 Extension [4] Default Not stored. Value Range Max. 20 characters Feature Guide References None FWD Set for Call from CO Indicates the current FWD status for incoming CO line calls (reference only). Default Value Range Off, On Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD)
Page 453
4.10 Extension [4] Value Range None, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD) FWD Destination for Call from CO Indicates the forwarding destination of incoming CO line calls (reference only). Default Not stored.
Page 454
4.10 Extension [4] Value Range Off, On Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] Feature Guide References 1.3.1.3 Do Not Disturb (DND) FWD Mode for Call from Extension Indicates the forwarding type of incoming intercom calls (reference only). Default None Value Range None, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2]...
4.10 Extension [4] Value Range 0–120 s Programming References 4.10.2 Wired Extension—FWD/DND [4-1-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD) 4.10.2 Wired Extension—FWD/DND [4-1-2] For each extension, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be programmed for incoming intercom and CO line calls. Select the desired extension from the Extension Number / Name list.
Page 456
4.10 Extension [4] Call from CO—DND Status Availability Turns on or off the DND feature for incoming CO line calls. Default Value Range OFF, ON Programming References None Feature Guide References 1.3.1.3 Do Not Disturb (DND) Call from CO—FWD Mode Specifies the circumstances when incoming CO line calls are forwarded.
Page 457
4.10 Extension [4] Call from Extension—Present Button Status Indicates the current status of the FWD/DND—Internal button (reference only). Default Current status Value Range OFF, FWD, DND Programming References None Feature Guide References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Call from Extension—FWD Status Availability Turns on or off the FWD feature for incoming intercom calls.
Page 458
4.10 Extension [4] Call from Extension—FWD Mode Specifies the circumstances when incoming intercom calls are forwarded. Default None Value Range None, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Programming References None Feature Guide References 1.3.1.2 Call Forwarding (FWD) Call from Extension—FWD Destination Specifies the forwarding destination of incoming intercom calls.
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed Dialing Directory shown on the extension's display. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 460
4.10 Extension [4] Type Specifies the feature to be assigned to the flexible CO button. Default Key Location 1–8: Single CO Key Location 9–12: Not Stored Value Range Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G-DN, Message Waiting, FWD/DND (Both), FWD/DND (External), FWD/DND (Internal), Group FWD (Both), Group FWD (External), Group FWD (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out, Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, Time Service - Automatic / Manual,...
Page 461
4.10 Extension [4] Feature Guide References 1.18.2 Flexible Buttons Parameter Selection (for Call Park) Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone. Default Automatic Value Range Automatic, Specific Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.12.2 Call Park...
Page 462
4.10 Extension [4] Value Range All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons 2.2.4 Time Service Parameter Selection (for TRS Level Change) Specifies the TRS level to be used temporarily on a certain extension. Default Value Range 1–7...
Page 463
4.10 Extension [4] Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for G-DN) Specifies the floating extension number of an incoming call distribution group to be accessed. Default Not stored.
Page 464
4.10 Extension [4] Ext No. or Floating Ext No. (for Group FWD (Both)) Specifies the floating extension number of an incoming call distribution group to which both intercom and CO line calls are forwarded. Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References...
Page 465
4.10 Extension [4] Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Call Log) Specifies the extension's own number or the floating extension number of an incoming call distribution group for which call log information is displayed. If the cell is left empty, the extension will display its own call log information.
Page 466
4.10 Extension [4] Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Two-way Record) Specifies the floating extension number of the VM (DPT) group containing the extension's mailbox. Default Not stored.
Page 467
4.10 Extension [4] Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Dial (for One-touch) Specifies the number to be dialed. The PBX can have a maximum of 1000 One-touch Dialing buttons for extensions and DSS Consoles.
Page 468
4.10 Extension [4] Value Range 1–30 Programming References 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Optional parameter (or Ringing Tone Type Number) (for Call Park) Specifies the number of the parking zone a call is to be parked by pressing the Call Park button whose Parameter Selection on this screen is Specific.
4.10 Extension [4] 4.10.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy The flexible CO button settings of an extension can be copied to different extensions. Select the extension that has the settings to copy to other extensions from the Extension Number / Name list, then click Copy Destination Extension Line Select the number and name of the extension that will receive the copied settings.
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 471
4.10 Extension [4] Property Indicates the property (reference only). Default Portable Station Value Range Not applicable. Feature Guide References None Extension Group Specifies the extension group to which the PS belongs. The extension group is used to compose call pickup groups and paging groups.
Page 472
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 473
4.10 Extension [4] Intercept Destination—Day, Lunch, Break, Night Specifies the Intercept Routing destination of CO line calls in each time mode for Intercept Routing–No Answer and Intercept Routing–Busy/DND feature. Default Not stored. Value Range Max. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause]) Programming References None Feature Guide References...
Page 474
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 475
4.10 Extension [4] Feature Guide References 1.23.1 Extension Personal Identification Number (PIN) ARS Itemized Code Specifies the itemized billing code used by the ARS feature for identifying the calls made from the PS for accounting and billing purposes. Default Not stored. Value Range Max.
Page 476
4.10 Extension [4] Programming References None Feature Guide References 1.1.3.3 Call Waiting Pickup Dial Set Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is dialed automatically after going off-hook by the Hot Line feature. Default Value Range Off, On...
Page 477
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 478
Specifies the Personal Absent Message which, unlike System Absent Message, is a customized message used only by the certain PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 479
4.10 Extension [4] Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 480
4.10 Extension [4] Feature Guide References 1.4.1.2 Line Preference—Incoming Call Waiting Tone Type Selects the type of Call Waiting tone sent to the busy extension. Default CW Tone 1 Value Range CW Tone 1, CW Tone 2 Programming References None Feature Guide References 1.7.4 Call Waiting Tone LCS Recording Mode...
Page 481
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 482
4.10 Extension [4] Feature Guide References 1.18.4 Display Information Automatic LCD Switch when start talking Enables the first line of the display to show the call duration automatically after answering a CO line call. Default Enable Value Range Disable, Enable Programming References None Feature Guide References...
Page 483
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 484
4.10 Extension [4] Outgoing Call Log Memory Specifies the number of telephone numbers dialed by the PS that are retained in the PS's Outgoing Call Log memory. Default Value Range 1–100 Programming References None Feature Guide References 1.6.1.3 Last Number Redial Group CW w/o Tone (Ring after Call) Enables an incoming call to an incoming call distribution group to arrive at a previously busy PS at the time of going on-hook after a call.
Page 485
Feature Guide References None Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max. 20 characters...
Page 486
4.10 Extension [4] FWD Mode for Call from CO Indicates the forwarding type of incoming CO line calls (reference only). Default None Value Range None, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Programming References 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD) FWD Destination for Call from CO...
Page 487
4.10 Extension [4] DND Set for Call from Extension Indicates the current DND status for incoming intercom calls (reference only). Default Value Range Off, On Programming References 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1.3 Do Not Disturb (DND) FWD Mode for Call from Extension Indicates the forwarding type of incoming intercom calls (reference only).
4.10 Extension [4] FWD No Answer Time Indicates the length of time an incoming call rings at the PS before the call is forwarded (reference only). Default 15 s Value Range 0–120 s Programming References 4.10.8 Portable Station—FWD/DND [4-2-2] Feature Guide References 1.3.1.2 Call Forwarding (FWD) 4.10.8 Portable Station—FWD/DND [4-2-2] For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be programmed for...
Page 489
4.10 Extension [4] Programming References None Feature Guide References 1.3.1.2 Call Forwarding (FWD) Call from CO—DND Status Availability Turns on or off the DND feature for incoming CO line calls. Default Value Range OFF, ON Programming References None Feature Guide References 1.3.1.3 Do Not Disturb (DND) Call from CO—FWD Mode Specifies the circumstances when incoming CO line calls are forwarded.
Page 490
4.10 Extension [4] Programming References None Feature Guide References 1.3.1.2 Call Forwarding (FWD) Call from Extension—Present Button Status Indicates the current status of the FWD/DND—Internal button (reference only). Default Current status Value Range OFF, FWD, DND Programming References None Feature Guide References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Call from Extension—FWD Status Availability Turns on or off the FWD feature for incoming intercom calls.
Page 491
4.10 Extension [4] Programming References None Feature Guide References 1.3.1.3 Do Not Disturb (DND) Call from Extension—FWD Mode Specifies the circumstances when incoming intercom calls are forwarded. Default None Value Range None, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Programming References None Feature Guide References...
4.10 Extension [4] Programming References None Feature Guide References 1.3.1.2 Call Forwarding (FWD) 4.10.9 Portable Station—Flexible Key [4-2-3] Each flexible CO button can be customized to allow one-touch access to a certain feature. A maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from the Extension Number / Name list.
Page 493
4.10 Extension [4] Parameter Selection (for Group CO) Specifies the CO line group to be accessed. Default Value Range 1–64 Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Parameter Selection (for Call Park) Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking zone.
Page 494
4.10 Extension [4] Feature Guide References 1.2.2.6 Log-in/Log-out 1.18.2 Flexible Buttons Parameter Selection (for Time Service) Selects which time modes are switched manually. Default Value Range All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons 2.2.4 Time Service...
Page 495
4.10 Extension [4] Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons 2.2.4 Time Service Ext No. or Floating Ext No. (for DSS) Specifies the number of an extension to be accessed. Default Not stored.
Page 496
4.10 Extension [4] Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Group FWD (Both)) Specifies the floating extension number of an incoming call distribution group to which both intercom and CO line calls are forwarded.
Page 497
4.10 Extension [4] Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Log-in/Log-out) Specifies the floating extension number of an incoming call distribution group to log-in to or log-out from. Default Not stored.
Page 498
4.10 Extension [4] Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Two-way Transfer) Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Page 499
4.10 Extension [4] Default Not stored. Value Range Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash]) Programming References 4.10.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Optional parameter (or Ringing Tone Type Number) (for Time Service) Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
4.10 Extension [4] Extension Number of Mailbox (for Two-way Transfer) Specifies the number of the extension whose mailbox will be used to record conversations. (For example, a secretary records a conversation into the mailbox of a boss.) This setting establishes the One-touch Two- way Transfer button.
4.10 Extension [4] Default Current status Value Range DSS, No Connection Programming References 4.7.11 Extension Port [1-5]—PT Property—Type (for APT or Hybrid port) Feature Guide References None Pair Extension Number Specifies the extension number of the PT to be used in pair with the DSS Console. Default Not stored.
Page 502
4.10 Extension [4] Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Parameter Selection (for Single CO) Specifies the CO line to be accessed. Default Value Range 1–8 Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Parameter Selection (for Group CO)
Page 503
4.10 Extension [4] Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.12.2 Call Park 1.18.2 Flexible Buttons Parameter Selection (for Log-in/Log-out) Specifies which incoming call distribution groups that the paired extension belongs to are logged-in to or logged-out from.
Page 504
4.10 Extension [4] Default Value Range 1–7 Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Parameter Selection (for Time Service - Automatic / Manual) Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic. Default Value Range 1–8...
Page 505
4.10 Extension [4] Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Message Waiting) Specifies the number of an extension or floating extension number of an incoming call distribution group for which messages are checked.
Page 506
4.10 Extension [4] Ext No. or Floating Ext No. (for Group FWD (External)) Specifies the floating extension number of an incoming call distribution group to which CO line calls are forwarded. Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References...
Page 507
4.10 Extension [4] Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Log-in/Log-out) Specifies the floating extension number of an incoming call distribution group to log-in to or log-out from. Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References...
Page 508
4.10 Extension [4] Feature Guide References 1.18.2 Flexible Buttons Ext No. or Floating Ext No. (for Two-way Transfer) Specifies the floating extension number of the VM (DPT) group containing the desired mailbox. Default Not stored. Value Range Max. 4 digits (consisting of 0–9) Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References...
Page 509
4.10 Extension [4] Feature Guide References 1.18.2 Flexible Buttons Optional parameter (or Ringing Tone Type Number) (for Time Service) Specifies the Time Table to be used for changing time modes in the Automatic Switching mode. Default Value Range 1–8 Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.18.2 Flexible Buttons...
4.10 Extension [4] Programming References 4.10.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy Feature Guide References 1.12.2 Call Park 1.18.2 Flexible Buttons Extension Number of Mailbox (for Two-way Transfer) Specifies the number of the extension whose mailbox will be used to record conversations. (For example, a secretary records a conversation into the mailbox of a boss.) This setting establishes the One-touch Two- way Transfer button.
4.7.1 Slot [1-1] Feature Guide References 1.15.1 Doorphone Call Name Specifies the doorphone name. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Feature Guide...
Page 512
4.11 Optional Device [5] Value Range Max. 20 characters Programming References None Feature Guide References 1.15.1 Doorphone Call Destination—Day, Lunch, Break, Night Specifies the destination number of doorphone calls for each port in each time mode. Default Not stored. Value Range Max.
4.11 Optional Device [5] Default Value Range 1–64 Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—TRS / CO—TRS Level—Day, Lunch, Break, Night 4.8.16 Class of Service—Internal Call Block [2-7-3] Feature Guide References 1.1.2.2 Internal Call Block 1.15.1 Doorphone Call VM Trunk Group Number Specifies the number of the VPS trunk (CO line) group sent to the VPS when the doorphone call destination is the floating extension number of a VM (DPT) group.
1.15.3 Trunk Answer From Any Station (TAFAS) 1.15.4 Background Music (BGM) Name Specifies the name of the external pager. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
Page 515
4.11 Optional Device [5] Programming References None Feature Guide References 1.15.6 Direct Inward System Access (DISA) Mode when the Destination through DISA is Busy Selects how DISA calls are handled if the destination is busy, and disables Call Waiting, FWD, or Idle Extension Hunting.
4.11 Optional Device [5] Programming References None Feature Guide References 1.15.6 Direct Inward System Access (DISA) Cyclic Tone Detection Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call for a DISA CO-to-CO line conversation established through an analog CO line. To change Cyclic Tone Detection, follow the steps below: Change Cyclic Tone Detection.
4.11 Optional Device [5] Programming References 4.7.1 Slot [1-1] Feature Guide References 1.15.6 Direct Inward System Access (DISA) Cyclic Tone Option—Tone Off Maximum Time Specifies the maximum time the PBX waits for a cyclic tone to be sent from the telephone company before recognizing it as a tone-off.
Page 518
1.15.5 Outgoing Message (OGM) 1.15.6 Direct Inward System Access (DISA) Name Specifies the name of the OGM. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
4.11 Optional Device [5] Feature Guide References 1.15.5 Outgoing Message (OGM) 1.15.6 Direct Inward System Access (DISA) Busy/DND Message No. Selects the OGM to be played for the caller when the destination party is busy or sets DND. Default None Value Range None, 1–32 Programming References...
Page 520
4.11 Optional Device [5] Value Range 1–4 Programming References None Feature Guide References 1.15.9 External Relay Control Physical Location—Slot Indicates the slot position (reference only). Default Current slot number Value Range Slot number Programming References None Feature Guide References 1.15.9 External Relay Control Physical Location—Port Indicates the port number (reference only).
4.11 Optional Device [5] Value Range Max. 20 characters Programming References None Feature Guide References 1.15.9 External Relay Control Relay Activate Time Specifies the length of time that the relay stays on when activated. Default Value Range 1–7 s Programming References None Feature Guide References 1.15.9 External Relay Control...
Page 522
4.11 Optional Device [5] External Sensor No. Indicates the number of the external sensor (reference only). Default Current sensor number Value Range 1–4 Programming References None Feature Guide References 1.15.8 External Sensor Physical Location—Slot Indicates the slot position (reference only). Default Current slot number Value Range...
Page 523
4.11 Optional Device [5] Sensor Name Specifies the sensor name. Default Sensor Value Range Max. 20 characters Programming References None Feature Guide References 1.15.8 External Sensor Destination—Day, Lunch, Break, Night Specifies the destination number of sensor calls for each port in each time mode. Default Not stored.
System Speed Dialing No. list. Name Specifies a name for the System Speed Dialing number. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
4.12 Feature [6] CLI Destination Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number are routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly. Default Not stored.
4.12 Feature [6] Removed Number of Digits Specifies the number of digits to be removed from the beginning of the incoming caller's number. Default Local / International Call Data 1–10: 3 Long Distance Code: 0 Value Range 0–9 Programming References None Feature Guide References 1.16.1 Caller ID...
1.8.5 Verified Code Entry User Name Specifies the user name assigned to the verified code. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored. Value Range Max.
Page 528
4.12 Feature [6] Verified Code PIN Specifies the PIN to be entered when making a CO line call with the verified code. Default Not stored. Value Range Max. 10 digits (consisting of 0–9, *, and #) Programming References None Feature Guide References 1.8.5 Verified Code Entry COS Number Specifies the COS that applies when making a CO line call with the verified code.
4.12 Feature [6] 4.12.5 Second Dial Tone [6-4] A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and the following digits. When a programmed Second Dial Tone Waiting code is dialed after seizing a CO line, a preprogrammed number of pauses are inserted after the code.
4.12 Feature [6] Absent Message Specifies the message according to need. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default 1: Will Return Soon 2: Gone Home...
4.12 Feature [6] Operator (Extension Number) Specifies the extension number or floating extension number of an incoming call distribution group to be designated as the tenant operator. When this parameter is left unspecified, a PBX operator serves as the tenant operator. Default Not stored.
4.12 Feature [6] Value Range Basic Memory: PBX basic system speed dialing numbers are used. Programming References 4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1] Feature Guide References 1.6.1.4 Speed Dialing—Personal/System 4.12.8 Hotel [6-8] Various settings related to the hospitality features of the PBX can be set. Hotel Operator Specifies the number of the extension designated as the hotel operator.
Page 533
4.12 Feature [6] Printing Message 1–8 Specifies the text of the message output on SMDR when this Printing Message is selected from an extension. The "%" character can be used in a message, and requires a number to be entered in its place when the message is selected from an extension.
4.13 TRS [7] 4.13 TRS [7] 4.13.1 Denied Code [7-1] Toll Restriction (TRS) prohibits an extension from making certain CO line calls. Each time mode of every COS is assigned one of the seven TRS levels. TRS level 7 provides the maximum restriction (all CO line calls are prohibited) and level 1 provides the minimum (all CO line calls are allowed).
4.13 TRS [7] Default Not stored. Value Range Max. 16 digits (consisting of 0–9, *, #, and X) Note "X" can be used as a wild card character which substitutes any digit in its position. Programming References 4.8.14 Class of Service—COS Settings [2-7-1]—TRS / CO—TRS Level—Day, Lunch, Break, Night 4.13.1 Denied Code [7-1] Feature Guide References 1.8.1 Toll Restriction (TRS)
4.13 TRS [7] TRS Override by System Speed Dialing Enables an outgoing CO line call to override TRS when the call is made using System Speed Dialing. Default Enable Value Range Disable, Enable Programming References 4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1] Feature Guide References 1.8.1 Toll Restriction (TRS) TRS Check for dial "* #"...
Page 537
4.13 TRS [7] Feature Guide References 1.8.1 Toll Restriction (TRS) Dial Digits Limitation after Answering Specifies a limit to be placed on the number of digits which can be dialed after an extension user receives a CO line call. If the number of dialed digits exceeds the programmed limit, the line will be disconnected. Default None Value Range...
4.14 ARS [8] 4.14 ARS [8] 4.14.1 System Setting [8-1] Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a CO line call is made, according to the programmed settings. The user-dialed number will be checked and modified in order to connect it to the appropriate carrier.
4.14 ARS [8] 4.14.2 Leading Number [8-2] Specifies the area codes and/or telephone numbers as leading numbers that will be routed by the ARS feature. A maximum of 1000 different leading numbers can be programmed, and each leading number can select a Routing Plan Table number, which determines the ARS procedure.
4.14 ARS [8] Default Value Range 1–16 Programming References None Feature Guide References 1.9.1 Automatic Route Selection (ARS) 4.14.3 Routing Plan Time [8-3] The start times of a maximum of 4 different time blocks (Time-A through D) can be programmed for each day of the week.
10 different carriers can be programmed to be used for the ARS feature. Carrier Name Specifies the carrier name. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 542
4.14 ARS [8] Feature Guide References 1.9.1 Automatic Route Selection (ARS) Removed Number of Digits Specifies the number of leading digits to remove from the user-dialed number. Default Value Range 0–15 Programming References None Feature Guide References 1.9.1 Automatic Route Selection (ARS) Modify Command Specifies the commands to modify the user-dialed number to access the carrier.
Page 543
4.14 ARS [8] Default Not stored. Value Range Max. 32 digits (consisting of 0–9, *, #, and P [Pause]) Programming References None Feature Guide References 1.9.1 Automatic Route Selection (ARS) Trunk Group Selects the CO line groups that connect to the carrier. Trunk Group for the Carrier—TRG 01–TRG 64 Enables each CO line group for each carrier.
4.14 ARS [8] Feature Guide References 1.9.1 Automatic Route Selection (ARS) Authorization Code for TRG Specifies an Authorization code for each CO line group. The Authorization codes can be added to the user- dialed number by specifying "G" command in Modify Command on the Carrier tab. Authorization Code for Trunk Group—TRG 01–TRG 64 Specifies the Authorization code of each carrier for each CO line group.
Specifies the CO line name which is shown on the extension's display when receiving a call from the CO line. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
4.15 CO & Incoming Call [9] Feature Guide References 1.18.4 Display Information Trunk Group Number Specifies the CO line group number to which the CO line belongs. Default Value Range 1–64 Programming References None Feature Guide References 2.2.2 Group 4.15.2 DIL Table & Port Setting [9-2] Direct In Line (DIL) can be selected for each CO line as the method of distributing incoming CO line calls to certain destinations.
Page 548
4.15 CO & Incoming Call [9] Port Indicates the port number (reference only). Default Current port number Value Range Port number Feature Guide References None Card Type Indicates the CO line card type (reference only). Default Current card type Value Range Card type Programming References None...
Page 549
4.15 CO & Incoming Call [9] Tenant Number Specifies the tenant number to determine the Time Table by which calls are distributed depending on the time of the day. Default Value Range 1–8 Programming References None Feature Guide References 1.1.1.2 Direct In Line (DIL) VM Trunk Group No.
Page 550
4.15 CO & Incoming Call [9] Value Range Slot number Feature Guide References None Port Indicates the port number (reference only). Default Current port number Value Range Port number Feature Guide References None Card Type Indicates the CO line card type (reference only). Default Current card type Value Range...
4.15 CO & Incoming Call [9] Feature Guide References 1.1.1.2 Direct In Line (DIL) 1.1.1.3 Calling Line Identification (CLI) Distribution 4.15.3 Miscellaneous [9-3] It is possible to activate the Intercept Routing feature when the destination of an incoming CO line call is unavailable, or when there is no destination for the call.
Page 552
4.15 CO & Incoming Call [9] Routing to Operator when the destination is not programmed Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call. (The Intercept Routing—No Destination feature always works for the calls through LCOT card, even when this feature is disabled.) Default Enable...
4.16 Maintenance [10] 4.16 Maintenance [10] 4.16.1 SMDR [10-1] Station Message Detail Recording (SMDR) automatically records detailed information about incoming and outgoing calls. SMDR Type Selects the format of SMDR output. Default Type A Value Range Type A: 80 digits without call charge information Type B: 80 digits with call charge information Type C: 120 digits Programming References...
Page 554
4.16 Maintenance [10] Default Value Range 4–99 Programming References None Feature Guide References 1.21.1 Station Message Detail Recording (SMDR) SMDR Skip Perforation (Number of Line) Specifies the number of lines to be skipped at the end of every page. The number of lines for the skip perforation should be shorter than the page length.
Page 555
4.16 Maintenance [10] Incoming Call Print Specifies whether the information relating to incoming CO line calls, such as caller's identification name and number, is printed. Default No Print Value Range No Print, Print Programming References None Feature Guide References 1.21.1 Station Message Detail Recording (SMDR) Intercom Call Print Specifies whether the dialed digits of outgoing intercom calls are printed.
Page 556
4.16 Maintenance [10] 1.21.1 Station Message Detail Recording (SMDR) ARS Dial Selects the type of the dialed number to be printed for a call with the ARS feature. Default Dial after ARS Modification Value Range Dial before ARS Modification: The user-dialed number Dial after ARS Modification: The ARS modified number Programming References None...
4.16 Maintenance [10] Programming References None Feature Guide References 1.6.1.1 Memory Dialing Features—OVERVIEW 1.21.1 Station Message Detail Recording (SMDR) Date Format Selects the printed date format. Default MM-DD-YY Value Range MM-DD-YY, DD-MM-YY, YY-MM-DD, YY-DD-MM Programming References None Feature Guide References 1.21.1 Station Message Detail Recording (SMDR) Time Format (12H/24H) Selects whether times are displayed using the 12- or 24-hour format.
4.16 Maintenance [10] Programming References None Feature Guide References 1.21.1 Station Message Detail Recording (SMDR) Condition Code "AN/VA" Print Specifies whether the time of answering an incoming CO line call is printed. Default No Print Value Range No Print, Print Programming References None Feature Guide References...
4.16 Maintenance [10] 010–019, 100–999: Disable Value Range Disable, Enable Programming References None Feature Guide References 2.3.2 PT Programming 4.16.3 Miscellaneous [10-3] Various settings for on-site and remote programming and diagnosis can be specified. Analog Remote (Modem) Floating Extension Number Specifies the floating extension number for analog remote maintenance.
Page 560
4.16 Maintenance [10] Password Lock Counter for Remote Programming Specifies the number of successive incorrect password entries before remote access is locked. Default None Value Range None, 1–15 Programming References None Feature Guide References 2.3.1 PC Programming Remote Maintenance Dial Number (Own telephone number for reference) Specifies the telephone number of the PBX used for reference.
Page 561
RS-232C: Word Length Specifies the number of bits in each byte of a character. When connecting the KX-TAW848 Maintenance Console to the PBX using an RS-232C cable, assign the following values to the Serial Interface (RS-232C) port of the PBX:...
Page 562
4.16 Maintenance [10] RS-232C: Parity Bit Selects a parity bit code that indicates what type of parity is used to detect an error in the string of bits composing a character. Make an appropriate selection depending on the requirements of the printer or personal computer. Default None Value Range...
Page 563
4.16 Maintenance [10] Error Log Information Print Specifies whether the PBX error log is printed to the SMDR output. Default Print Value Range No Print, Print Programming References None Feature Guide References 1.21.1 Station Message Detail Recording (SMDR) 2.4.3 Local Alarm Information Local Alarm Display Extension 1, Local Alarm Display Extension 2 Specifies the extension numbers of PTs which respond to a local alarm.
Page 564
Specifies the command to automatically initialize an external modem every time it is plugged into the Serial Interface (RS-232C) port of the PBX. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default AT&F0Q0E0V1S0=1X0&D0...
Specifies the command to manually initialize an external modem. The command specified here is controlled by PT system programming (External Modem Control [801]). As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Default Not stored.
Page 566
Programming References None Feature Guide References 2.2.6 Manager Features System Password - PC Programming : User Level Specifies the system password used to access KX-TAW848 Maintenance Console in User Level. Default 1234 Value Range 4–10 digits (consisting of 0–9) Programming References...
Page 567
4.16 Maintenance [10] System Password - PC Programming : Administrator Level Specifies the system password used to access KX-TAW848 Maintenance Console in Administrator Level. Default 1234 Value Range 4–10 digits (consisting of 0–9) Programming References None Feature Guide References 2.3.1 PC Programming System Password - PC Programming : Installer Level Specifies the system password used to access KX-TAW848 Maintenance Console in Installer Level.
5.1 Capacity of System Resources Capacity of System Resources 5.1.1 Capacity of System Resources System Item Capacity Tenant CO Line Group Extension Group Paging Group Call Pickup Group Incoming Call Distribution Group 64 (32 extensions/group) PS Ring Group VM (DPT) Group 1 VPS 8 ch VM (DTMF) Group...
5.1 Capacity of System Resources Dialing Item Capacity Emergency Call 32 digits, 10 entries Quick Dialing 4 digits, 80 entries System Speed Dialing 32 digits, 1 000 entries Personal Speed Dialing 32 digits, 10 entries/extn. One-touch Dialing 32 digits Hot Line 32 digits Redial 32 digits...
Page 572
5.1 Capacity of System Resources Password Item Capacity System Password for Installer 4 – 10 characters System Password for Administrator—for PC 4 – 10 characters Programming System Password for User—for PC Programming 4 – 10 characters System Password for Administrator—for PT 4 –...
5.2 Tones/Ring Tones Tones/Ring Tones 5.2.1 Tones/Ring Tones Tone Patterns (Default) Confirmation Tone 1 Confirmation Tone 2 Confirmation Tone 3 Confirmation Tone 4 Confirmation Tone 5 Dial Tone 1 Dial Tone 2 Dial Tone 3 Dial Tone 4 Busy Tone Reorder Tone Ringback Tone 1 Ringback Tone 2...
Page 574
5.2 Tones/Ring Tones Tone Patterns (Default) 15 s Hold Alarm Tone Call Waiting Tone 1 Call Waiting Tone 2 Ring Tone Patterns (Default) Single Double Triple S-Double Feature Guide...
Page 578
Index Call Hold Call Hold Retrieve Deny Absent Message Call Monitor Absent Message [008] Call Park Account Code Entry Call Park Recall Account Code Mode [508] Call Park Retrieve Deny Administrative Information Features Call Pickup Alternate Calling—Ring/Voice Call Retry Alternate Receiving/Calling Mode (Ring/Voice) Override Call Splitting Alternate Receiving—Ring/Voice Call Transfer...
Page 579
Index Destination for Overflow Time Expiration [625] Extension Personal Identification Number (PIN) Destination When All Busy [627] Extension Personal Identification Number (PIN) [005] Dial Tone Extension PIN Lock Dial Tone Transfer Extension Port Configuration Dial Type Selection Extension Programming Dialing Digit Restriction during Conversation Extension-to-CO Line Call Duration DIL —>...
Page 580
Multiple FWD Incoming CO Line Call Features—OVERVIEW Music for Transfer [712] Music on Hold Installation Manual References Music on Hold [711] Installing and Starting KX-TAW848 Maintenance Console Mute Installing KX-TAW848 Maintenance Console Intercept Routing Intercept Routing—Busy No Line Preference 47, 58 Intercept Routing—DND...
Page 581
Programming Mode Limitation [516] Special Carrier Access Code [303] Programming Structure Speed Dialing—Personal/System Proprietary Telephone (PT) Features Starting KX-TAW848 Maintenance Console PS —> Portable Station (PS) Features Station Hunting —> Idle Extension Hunting PS Directory Station Message Detail Recording (SMDR) PS Feature Buttons Station Password Lock —>...
Page 582
Index TRS Level for Extension Dial Lock [510] TRS Level for System Speed Dialing [509] TRS Override by System Speed Dialing TRS Override by System Speed Dialing [300] TRS/ARS Programming Trunk Answer From Any Station (TAFAS) Two-way Recording into the VPS UCD —>...