Advertisement
Quick Links
Download this manual
See also:
User Manual
3-Port Wireless Print Server
With 2 USB Ports, 1 Parallel Port & 802.11g WLAN
The DP-G321 multi-port wireless print server provides 2 high-speed USB 2.0 printer ports for connection to 2 USB-
supported printers, and 1 parallel printer port for connection to a parallel printer. Equipped with a 10/100BASE-TX Ethernet
and high-speed 802.11g wireless LAN interface, this device lets you conveniently share your printer with a group of users,
with or without the network wires. Supporting multiple network operating systems, this print server brings a high level of
flexibility and performance to your printing needs.
Multiple Ports Save Cost
With 3 printer ports available from a single device, you don't
need to purchase and install a separate print server for each
printer. This multi-port print server is only slightly more
expensive than a single-port print server. Where your printers
are closely placed together, it makes sense to buy 1 single
print server instead of 3.
Simultaneous Printing on All Printers
Equipped with a powerful CPU, large memory and high-
speed printer ports, this print server makes printing of your
network files fast. All printers attached to this device can print
their print jobs at the same time, giving your multi-port print
server a similar performance as 3 separate single-port print
servers.
Ethernet and Wireless Interfaces
Two LAN interfaces are provided on this print server: (1) a
10/100BASE-TX Ethernet port and (2) a high-speed 802.11g
wireless LAN interface supporting up to 54Mbps network
data transfer. This built-in flexibility allows both Ethernet
users and wireless users to print files through the print server.
Key Features
2 high-speed USB 2.0 printer ports, 1 parallel printer port
Built-in high-speed 802.11g wireless interface
10/100BASE-TX Ethernet port
Prints files from Windows, Unix, NetWare, Macintosh
Remote printing support
Print Server
Wireless Network Security
The DP-G321 provides the necessary security for wireless
users, using the user-selectable 64/128-bit industry-standard
WEP (Wired Equivalent Privacy) encryption protocol. Data
privacy mechanism is based on a shared key algorithm, as
described in the wireless LAN standard.
Remote Printing Support
The DP-G321 supports IPP (Internet Printing Protocol), so
you can set an IP address in the print server for remote
users to output print files to the printers from remote places.
Setup & Access Control
Setting up the print server can be done from any
workstation running a web browser. In addition, Windows-
based menu-driven program allows you to do
administration jobs and set access control. Access to your
network printer can be control by setting up a list of MAC
addresses of user computers allow to print files. SNMP and
latest MIB-II MIBs are built into the print server, allowing
you to manage this device on an SNMP standard-based
network.
User access & print job control
Easy web-based administration
Windows-based program for easy setup/management of
print jobs
SNMP and MIB-II (RFC 1213) support for platform-
independent management
DP-G321
Advertisement
Related Manuals for D-Link DP-G321
Summary of Contents for D-Link DP-G321
- Page 1 With 2 USB Ports, 1 Parallel Port & 802.11g WLAN The DP-G321 multi-port wireless print server provides 2 high-speed USB 2.0 printer ports for connection to 2 USB- supported printers, and 1 parallel printer port for connection to a parallel printer. Equipped with a 10/100BASE-TX Ethernet and high-speed 802.11g wireless LAN interface, this device lets you conveniently share your printer with a group of users,...
-
Page 2: Technical Specifications
FAX: 1-866-743-4905 - 2Mbps (QPSK): -90 dBm without prior notice. Canada TEL: 1-905-8295033 FAX: 1-905-8295223 D-Link is a registered trademarks and - 1Mbps (BPSK): -90 dBm Europe TEL: 44-20-8731-5555 FAX: 44-20-8731-5511 AirPlusG is a trademark of D-Link Corporation/D-Link System Inc. All...