Table of Contents
Advertisement
Safety Information
Read the operating instructions for the unit and all other com-
ponents of your car audio system carefully before using the
system. They contain instructions about how to use the sys-
tem in a safe and effective manner. Panasonic assumes no
responsibility for any problems resulting from failure to
observe the instructions given in this manual.
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
Warning
instructions may result in severe injury or death.
Warning
Observe the following warnings when using
this unit.
The driver should neither watch the display nor
operate the system while driving.
Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and use
the parking brake before watching the display or operating
the system.
Use the proper power supply.
This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this prod-
uct with other battery systems, especially a 24 V DC battery
system.
Keep batteries and insulation film out of reach of
infants.
Batteries and insulation film can be ingested, so keep them
out of the reach of infants. If an infant ingests a battery or
insulation film, please seek immediate medical attention.
Protect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the
product yourself. If the product needs to be repaired, consult
your dealer or an authorized Panasonic Service Center.
Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.
The remote control unit should not lie about in the
car.
If the remote control unit lies about, it could fall on the floor
while driving, get wedged under the brake pedal, and lead to
a traffic accident.
Refer fuse replacement to qualified service person-
nel.
When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may lead
to smoke, fire, and damage to the product.
2
CQ-VD7001W
This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
Caution
instructions may result in injury or material dam-
age.
Observe the following warnings when
installing.
Disconnect the lead from the negative (–) battery
terminal before installation.
Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a
short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND
PERSONAL INJURY OR DEATH.
Never use safety-related components for installa-
tion, grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.
Installing the product on the air bag cover or in a
location where it interferes with airbag operation is
prohibited.
Check for piping, gasoline tank, electric wiring, and
other items before installing the product.
If you need to open a hole in the vehicle chassis to attach or
wire the product, first check where the wire harness, gaso-
line tank, and electric wiring are located. Then open the hole
from outside if possible.
Never install the product in a location where it inter-
feres with your field of vision.
Never have the power cord branched to supply other
equipment with power.
After installation and wiring, you should check the
normal operation of other electrical equipment.
The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.
In the case of installation to an airbag-equipping
car, confirm warnings and cautions of the vehicle
manufacturer before installation.
Make sure the leads do not interfere with driving or
getting in and out of the vehicle.
Insulate all exposed wires to prevent short circuit-
ing.
Caution
Observe the following cautions when using this
unit.
Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and
traffic conditions while driving.
Do not insert or allow your hand or fingers to be
caught in the unit.
To prevent injury, do not get your hand or fingers caught in
moving parts or in the disc slot. Especially watch out for
infants.
This unit is designed for use exclusively in automo-
biles.
Do not operate the unit for a prolonged period with
the engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
Do not expose the unit to direct sunlight or exces-
sive heat.
Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.
Do not use the product where it will be exposed to
water, moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead to
smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on rainy
days.
Observe the following cautions when
installing.
Refer wiring and installation to qualified service
personnel.
Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from your
own installation of the unit.
Follow the instructions to install and wire the prod-
uct.
Not following the instructions to properly install and wire the
product could cause an accident or fire.
Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent
them from getting caught in the vehicle chassis, screws, and
moving parts such as seat rails. Do not scratch, pull, bend or
twist the leads. Do not run them near heat sources or place
heavy objects on them. If leads must be run over sharp
metal edges, protect the leads by winding them with vinyl
tape or similar protection.
Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those sup-
plied or designated may result in internal damage to the unit.
Faulty installation may lead to an accident, a malfunction or
fire.
Do not block the air vent or the cooling plate of the
unit.
Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.
Do not install the product where it is exposed to
strong vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.
Installation Angle
The product should be installed in a horizontal position with
the front end up at a convenient angle, but not more than
30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit must be installed.
Consult your dealer for further details.
Wear gloves for safety. Make sure that wiring is
completed before installation.
To prevent damage to the unit, do not connect the
power connector until the whole wiring is complet-
ed.
Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
Observe the following cautions when handling
the battery for the remote control unit.
Use only specified battery (CR2025).
Match the polarity of the battery with the (+) and (–) marks
in the battery case.
Replace a dead battery as soon as possible.
Remove the battery from the remote control unit when not
using it for an extended period of time.
Insulate the battery (by placing them in a plastic bag or cov-
ering them with vinyl tape) before disposal or storage.
Dispose of the battery according to the local regulations.
Do not disassemble, recharge, heat or short the battery. Do
not throw a battery into a fire or water.
In case of battery leakage
Thoroughly wipe the battery liquid off the battery case and
insert new battery.
If any part of your body or clothing comes into contact with
battery liquid, wash it with plenty of water.
If battery liquid comes into contact with your eyes, wash
them with plenty of water and get immediate medical atten-
tion.
CQ-VD7001W
3
Advertisement
Chapters
Table of Contents
Related Manuals for Panasonic CQ-VD7001W
Summary of Contents for Panasonic CQ-VD7001W
-
Page 1: Safety Information
The meanings of Avoid slanted or strongly curved surfaces for installation. If tem in a safe and effective manner. Panasonic assumes no the pictographs are explained below. It is important that you Observe the following cautions when using this... -
Page 2: Notes On Use
When the liquid crystal panel reaches high temperatures THIS PRODUCT IS A CLASS I LASER PRODUCT. Q’ty: 1 or low temperatures, chemical changes occur within the ASPECT OPEN / CLOSE CQ-VD7001W TILT O / C TEXT P·MODE CQ-VD7001U USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE... -
Page 3: Table Of Contents
Features Contents CQ-VD7001W System Upgrade Panasonic welcomes you to our constantly growing family In-Dash 7” Widescreen Color LCD Monitor/DVD of electronic products owners. 5.1-channel Surround System Receiver We endeavor to give you the advantages of precise elec- This unit has a built-in 4-channel amplifier. The procedure... -
Page 4: Preparation
¡ When you connect external devices to Video Input CQ-VD7001W CQ-VD7001W Terminal (VTR), be sure to connect the side brake This manual refers to the connection to the Panasonic car naviga- connection lead page 63). tion system that may possibly come on the market in the future. -
Page 5: Name Of Controls And Functions
[O/C] (OPEN/CLOSE) TILT O / C P·MODE CQ-VD7001W (P•MODE) DISC TUNE / ENTER This book refers to connections to the Panasonic car navigation POWER NAVIGATION EJECT TRACK MUTE MODE MENU NAVI system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line. -
Page 6: Remote Control
¡Changes the modes such as sound CHAPTER) FOLDER) [Only for CD Changer/DVD and picture. page 16, 20, 31) Changer] [SUB] (SUB ¡Switching the subtitle language. TITLE) page 23, 33) [Only for DVD] [ANGLE] ¡Switching the angle. page 23, 33) [Only for DVD] CQ-VD7001W CQ-VD7001W... -
Page 7: Touch Panel Operation Overview
44) when a CD Changer and DVD Changer is connected. (AUX ¡Refer to the description of each mode for how to operate the mode is selected when no CD Changer or DVD Changer is operation screen. connected.) CQ-VD7001W CQ-VD7001W... -
Page 8: General
OPEN / CLOSE MODE MODE MENU NAVI TILT TILT O / C O / C STOP PAUSE PLAY P·MODE DISP CQ-VD7001W TRACK / SEARCH []] [[] DVD MENU RETURN TITLE/CHAPTER RANDOM DISC TITLE RAND SCAN TUNE / ENTER ENTER ST/ MONO... -
Page 9: Before Disc Playback
The numbers indicate the number of languages, tracks, angles, etc., recorded on the disc. Video ASPECT ASPECT OPEN / CLOSE OPEN / CLOSE Screen size (H:V aspect ratio) CQ-VD7001W CQ-VD7001W TILT TILT O / C O / C Format TEXT TEXT P·MODE... -
Page 10: Disc Player
Disc Player Basic Operations ASPECT OPEN / CLOSE CQ-VD7001W TILT O / C TEXT P·MODE [MODE] CQ-VD7001U Operations Compatible Compatible Operations DISC ENTER ENTER TUNE / POWER NAVIGATION EJECT Discs Discs TRACK POWER NAVIGATION MODE MODE MENU NAVI MUTE MODE... - Page 11 ¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. ¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan- guage/angle. CQ-VD7001W CQ-VD7001W...
-
Page 12: Notes On Mp3/Wma
It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally. No warranty Above description complies with our investigations as of December 2004. It has no warranty for reproducibility and displayability of MP3/WMA. CQ-VD7001W CQ-VD7001W... -
Page 13: Radio
¡ Touch/press and hold for more than 2 seconds. Tuning ¡ The frequency blinks once, and a receiving station is saved in the memory. ASPECT OPEN / CLOSE Auto presetting CQ-VD7001W TILT O / C ASPECT SCROLL New stations overwrite existing saved stations. -
Page 14: Vtr
(on).) ¡If no operation is performed for 10 seconds or /[DISP] is touched/pressed, the operation buttons disappear. ¡VTR terminal is not used for the Panasonic car navigation system (available in future). Refer to NAVI SETUP (Navigation Setup) for setting. page 43) -
Page 15: Cd Changer Control
Note: ¡Connect the CD changer, and load a magazine (discs). Panasonic CD changer unit. (CX-DP880) ¡DVD changer functions are designed for optional ¡Be sure to connect RCA cord of the Panasonic DVD RADIO CH-C Panasonic DVD changer unit. (CX-DH801W) Changer to CH/AUX-IN. Otherwise the changer cannot be... - Page 16 ¡The language on the DVD settings takes priority when the power is turned on or the disc is loaded. [RET] Returns to the previous display. ¡The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan- – guage/angle. CQ-VD7001W CQ-VD7001W...
-
Page 17: Settings
Touch desired setting. Touch in Operation Screen. : Press [MENU]. : Press [}] , [{] , []] or [[] to select, then [ENTER] to deter- mine. OPEN / CLOSE ASPECT CQ-VD7001W TILT O / C TEXT P·MODE CQ-VD7001U DISC ENTER ENTER... - Page 18 If you forget it, you will be unable to use the : puts back minute unit. In case you forget the ID code, please consult default: ENGLISH your nearest Panasonic Service Center. : puts forward minute q Touch first w Touch second : ID code deletion...
- Page 19 : Previous menu : Quit : Select/adjust [MENU] [MODE] [ENTER] [MENU] [MODE] [ENTER] : Previous menu : Quit []] [[] [}] [{] : Previous menu : Quit []] [[] [}] [{] : Select/adjust : Determine : Select/adjust : Determine CQ-VD7001W CQ-VD7001W...
- Page 20 : Previous menu : Quit : Select/adjust [MENU] [MODE] [ENTER] [MENU] [MODE] [ENTER] : Previous menu : Quit []] [[] [}] [{] : Previous menu : Quit []] [[] [}] [{] : Select/adjust : Determine : Select/adjust : Determine CQ-VD7001W CQ-VD7001W...
-
Page 21: Down Mix
Connection with Panasonic car navigation system: ¡ selection in some audio settings may disable audio This manual refers to the connection to the Panasonic DISPLAY output from the subwoofer. car navigation system that may possibly come on the market in the future. Descriptions regarding the con-... - Page 22 : Previous menu : Quit : Select/adjust [MENU] [MODE] [ENTER] [MENU] [MODE] [ENTER] : Previous menu : Quit []] [[] [}] [{] : Previous menu : Quit []] [[] [}] [{] : Select/adjust : Determine : Select/adjust : Determine CQ-VD7001W CQ-VD7001W...
- Page 23 RANDOM TITLE RAND SCAN ST/ MONO SUBTITLE AUDIO ANGLE DISC/FOLDER DISC/FOLDER ASPECT SCROLL ASPECT OPEN / CLOSE SCRL MUTE CQ-VD7001W TILT O / C TEXT P-MODE P·MODE CQ-VD7001U DISC TUNE / ENTER CAR AV POWER NAVIGATION EJECT TRACK MUTE MODE...
-
Page 24: Trouble Shooting
Please refer checking and repair to professionals. ¡Never try to repair the unit by yourself Panasonic shall not be liable for any accidents arising out of neglect because it is dangerous to do so. The number of auto The number of receivable stations is less than 6. - Page 25 Pro Logic to (off). The picture or the (AUTO) is not selected as the rear monitor setting. AUTO sound of the rear moni- aSelect (AUTO) for the setting. AUTO tor is not switchable. CQ-VD7001W CQ-VD7001W...
-
Page 26: Maintenance
[u]. If failure persists, press the reset switch. (Press the reset switch - E 3 - in the CD changer). If normal operation is not restored, call the store where you purchased the unit or the nearest Panasonic Service Center. DISC ENTER... -
Page 27: Notes On Discs
¡This player does not play CD-R/RW discs which contain Please remove the burrs 7185 Gujarati 8065 Panjabi other than CD-DA or MP3/WMA data. before use. 7265 Hausa 8076 Polish 7273 Hindi 8083 Pashto, Pushto 7282 Croatian 8084 Portuguese 7285 Hungarian 8185 Quechua CQ-VD7001W CQ-VD7001W... -
Page 28: Definition Of Terms
Chapter 2 …… Chapter 1 …… Chapter 1 Track (Video CD/CD) Video CDs or CDs are divided into some sections (tracks). Each section is numbered; these numbers are called “Track number”. …… Track 1 Track 2 Track 3 Track CQ-VD7001W CQ-VD7001W... -
Page 29: Installation
ø) 30°. In case of difficulty, please consult your nearest authorized modification without prior notice due to improvements. Panasonic Service Center. <ZZBISVD7001A> ¡Use the supplied screws for installation exclusively. In case of losing any of them, please order the specific 1. -
Page 30: Mounting Collar
Mounting Spring e . t Tapping Screw Clamp plate (5 mmø x 16 mm) Insert Trim Plate q. y Hex. Nut (5 mmø) r Mounting Bolt After installation r Mounting Bolt (5 mmø) reconnect the negative (5 mmø) (–) battery terminal. CQ-VD7001W CQ-VD7001W... -
Page 31: Round Head Screw (5 Mmø X 6 Mm)
Comes up to this point. Side Brake (Parking Brake) Push here to Power source side lead Connection Lead remove the (Blue/yellow stripe) clamp plates. * To remove Trim Plate q, pull it from right side to left side. CQ-VD7001W CQ-VD7001W... -
Page 32: Electrical Connections
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may This manual refers to the connection to the Panasonic car navigation system that may possibly come on the market in clear the memory. -
Page 33: Power Connector
(Yellow) To the car battery, continuous +12 V DC DIN Cord (Black) Remote Control Power Lead (Red) (not used) DIN Cord (black) RCA Cord Sensor Extension Cord (option) DIN Connector CQ-VD7001W (R) (Red) RCA Cord (Rear) CH/AUX-IN (R) (Red) Remote-Out Lead (L) (White) (Black) -
Page 34: Reverse Extension Cord
Rear View Camera ¡ Please observe what shapes the connectors of the connecting devices are and where each of them is connected to in Control Unit (option) order to establish a proper connection. CQ-VD7001W Caution Rear Monitor (Rear) STAND BY (R) -
Page 35: Specifications
¡Light source : Internal light (Built-in small fluorescent lamp) Note: ¡Specifications and the design are subject to modification without notice due to improvements in technology. ¡Some figures and illustrations on this manual may be different from your product. CQ-VD7001W CQ-VD7001W...