Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWH 2101
Summary of Contents for Zanussi ZWH 2101
- Page 1 User manual Washing Machine ZWH 2101 ZWH 2121...
-
Page 2: Table Of Contents
Adjust the feet to have the necessary Risk of explosion or fire. space between the appliance and the carpet. www.zanussi.com... -
Page 3: Environment Concerns
Packaging materials Recycle the materials with the symbol Technical information Dimensions Width / Height / Depth 595 / 850 / 480 mm Electrical connection: Voltage 220-240 V Overall power 2100 W Fuse 10 A Frequency 50 Hz www.zanussi.com... -
Page 4: Product Description
Water supply Maximum load Cotton 7 kg Spin speed Maximum 1000 rpm (ZWH 2101) 1200 rpm (ZWH 2121) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Product description Worktop Feet for the appliance level... -
Page 5: Control Panel
Spin button Easy iron button Delay Star button Extra rinse button Programme knob Programme phase indicators Turn this knob to set a programme. Indicator Description Start button Washing phase indicator Press this button to start a programme. Rinsing phase indicator www.zanussi.com... -
Page 6: Programmes
Rinses 60° C max. 7 kg Spin phase at the maxi- mum speed White and coloured cotton with normal Wash Хлопок ЭКО or light soil. Rinses 40° C max. 7 kg Spin phase at the maxi- mum speed www.zanussi.com... - Page 7 «hand Rinses 40° – Cold washing» care symbol. Spin phase at 800 rpm max. 1.5 kg Hand washable delicate fabrics with Wash Ручная стирка 30° C «hand washing» care symbol. Rinses max. 3 kg Spin phase at 800 rpm www.zanussi.com...
- Page 8 1) This is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards, with a maximum load of 7 cotton at the maximum spin speed. www.zanussi.com...
-
Page 9: Hints And Tips
Water hardness table Water hardness Level Type °dH °T.H. mmol/l Clarke soft 0-15 0-1.5 medium 8-14 16-25 1.6-2.5 10-16 hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25 www.zanussi.com... -
Page 10: Before First Use
Liquid additives compartment (fabric condi- Caution! Use only specified detergents for washing tioner, starch). machine. Put the product in the compartment before you start the programme. Always obey the instructions that you find on the packaging of the detergent products. www.zanussi.com... - Page 11 Now, you can set a new washing pro- • The start button indicator flashes or the End indicator gramme. is on. • Turn the programme knob to to deactivate the ap- The appliance does not drain the water. pliance. www.zanussi.com...
-
Page 12: Care And Cleaning
• Set the hottest cotton wash programme • Use a correct quantity of powder detergent with biolog- ical properties. After each wash, keep the door open for a while to prevent mould and to let unpleasant smells go out. www.zanussi.com... - Page 13 Do not remove the filter while the appliance oper- not occur, contact ates. Do not clean the drain pump if the water in the the service centre. appliance is hot. The water must be cold before you clean the drain pump. To clean the drain pump: www.zanussi.com...
-
Page 14: Troubleshooting
The manufacturer is not responsible for damages caused by low temperatures. Troubleshooting The start of the appliance does not occur or it stops dur- First try to find a solution to the problem (refer to the ta- ing operation. ble). If not, contact the service centre. www.zanussi.com... - Page 15 The filter of the drain pump is Clean the filter of the drain pump. Refer to 'Care blocked. and cleaning'. Balance problems with the laundry Adjust manually the items in the tub and start load. the spin phase again. www.zanussi.com...
- Page 16 We recommend that you write the Refer to the information supplied with this appliance for information here: guarantee condition and point of contact. The information to give to the service is on the rating plate. Model ....Product number 914..... Serial number ....(S.N.) www.zanussi.com...
-
Page 17: Installation
Use the gloves. With a scissor cut the straps and with a cutter remove the external film. Do not to discard the plastic cover (A). Open the door and remove all the items from the drum. Remove the polystyrene packaging materials. www.zanussi.com... - Page 18 Make sure not to damage the ho- ses. Remove the four bolts with a key. Pull out the plastic spacers. Remove the power supply cable and the drain hose from the hose holders. Remove the polystyrene protection from the bot- tom. www.zanussi.com...
- Page 19 • Loosen or tighten the feet to adjust the level. A cor- rect adjustment of the appliance level prevents the With the plastic hose guide vibration, noise and the movement of the appliance when in operation. • The appliance must be level and stable. www.zanussi.com...
- Page 20 60 cm and not more than 90 cm. The end of the drain hose must always be venti- lated , i.e. the inner diameter of the drainpipe must be larger than the external diameter of the drain hose. www.zanussi.com...
- Page 24 www.zanussi.com/shop...