Table of Contents
Advertisement
ADSL2+ Gateway with VoIP
Table 1: Interactive Voice Response Menu
Action
Command (press these
keys on the telephone)
Set the Mode
201
Enable/Disable WAN Access to
7932
the Web-based Utility
Manual Reboot
732668
Factory Reset
73738
User Factory Reset
877778
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Choices
Description
Press 0 to select the router/
If the Voice Gateway acts as
NAT mode.
the router for your network,
Press 1 to select the bridge/
use the router/NAT mode.
switch mode.
If your network already has a
router, use the bridge/switch
mode.
Press 1 to enable.
Use this setting to enable or
Press 0 to disable.
disable WAN access to the
web-based utility. (This Utility
lets you configure the Voice
Gateway.)
After you hear, "Option
successful," hang up the
phone. The Voice Gateway will
automatically reboot.
Press 1 to confirm.
If necessary, enter the
Press * (star) to cancel.
password. The Voice Gateway
will request confirmation; enter
1 to confirm. You will hear,
"Option successful." Hang up
the phone. The Voice Gateway
will reboot, and all settings will
be reset to their factory default
settings.
Press 1 to confirm.
The Voice Gateway will request
Press * (star) to cancel.
confirmation; enter 1 to
confirm. You will hear, "Option
successful." Hang up the
phone. The Voice Gateway will
reboot and all user-
configurable settings will be
reset to their factory default
settings.
NOTE: This feature may be protected by a
password available only from your ITSP.
If you need to enter a password, refer to the
following section, "Entering a Password."
12
Advertisement
Table of Contents
