2.31. Timesync; Synced_Clock (Id: 03500001); Failure_Communicate_With_Timeservers (Id: 03500002); Clockdrift_Too_High (Id: 03500003) - D-Link NetDefend SOHO DFL-160 Reference Manual
Utm firewall
Hide thumbs
Also See for NetDefend SOHO DFL-160:
- User manual (130 pages) ,
- Quick installation manual (61 pages) ,
- Quick installation manual (33 pages)
Table of Contents
Advertisement
2.31. TIMESYNC
2.31. TIMESYNC
These log messages refer to the TIMESYNC (Firewall time synchronization events) category.
2.31.1. synced_clock (ID: 03500001)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.31.2. failure_communicate_with_timeservers (ID:
03500002)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.31.3. clockdrift_too_high (ID: 03500003)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
NOTICE
The clock at <oldtime>, was off by <clockdrift> second(s) and
synchronized with <timeserver> to <newtime>
The clock has been synchronized with the time server.
None
None.
2
oldtime
newtime
clockdrift
timeserver
WARNING
Communication with the timeserver(s) failed. Clock not updated.
The unit failed to establish a connection with the time sync server. The
clock has not been updated.
clock_not_synced
Verify that the time sync server is running.
1
WARNING
According to the timeserver the clock has drifted <clockdrift>
seconds(s) which is NOT in the allowed correction interval
(+/-<interval> seconds)
The clock has drifted so much that it is not within the allowed +/-
correction interval. The clock will not be updated.
clock_not_synced
If the correction interval is too narrow, it can be changed in the
Advanced Settings section.
331
Chapter 2. Log Message Reference
Advertisement
Table of Contents
