Page 3
• It is dangerous to alter the specifications or modify this Installation product in any way. Any damage to the cord may cause Important! For electrical connection carefully follow the a short-circuit, fire and/or electric shock. instructions given in specific paragraphs. Warning! Any electrical component (power cord, •...
Operation Switching on A medium setting is generally the most suitable. Insert the plug into the wall socket. However, the exact setting should be chosen keeping in Turn the Temperature regulator clockwise to a medium mind that the temperature inside the appliance depends setting.
Helpful hints and tips Hints for energy saving Hints for refrigeration • Do not open the door frequently or leave it open longer Useful hints: than absolutely necessary. Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable drawer.
• disconnect the appliance from electricity supply • remove all food • defrost and clean the appliance and all accessories • leave the door/doors ajar to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
Problem Possible cause Solution Water flows on the ground. The melting water outlet does not flow Attach the melting water outlet to the in the evaporative tray above the com- evaporative tray. pressor. The temperature in the appliance The temperature regulator is not set Set a higher temperature.
Installation Electrical connection Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance Before plugging in, ensure that the voltage and frequency before installing the appliance. shown on the rating plate correspond to your domestic power supply.
Page 9
44mm Install the appliance in the Adjust the appliance in the Attach the appliance to the Push the sealing strip be- niche. niche. niche with 4 screws. tween the appliance and the Push the appliance in the The lower hinge cover (in adjacent cabinet.
8 mm 8 mm Push the part (Hc) on the Open the appliance door Remove the brackets and Place the small square on part (Ha). and the kitchen furniture mark a distance of 8 mm the guide again and fix it door at an angle of 90°.
Page 12
To buy accessories, consumables and spare parts at our online shop please visit: www.electrolux.co.uk www.zanussi.com...