Table of Contents
Advertisement
7. Select the spin speed or the
RINSE HOLD option
Press the SPIN SPEED button
order to select the desired spin speed or the RINSE
HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE
Press the OPTIONS button so as to cause one or
both of the lights to light up.
9. Select the QUICK WASH option
Depress button
to select the QUICK WASH
option, if your laundry is only slightly soiled. The
relevant light illuminates.
repeatedly, in
option.
option.
10. Start the programme
Press the START/PAUSE button
light will stop flashing and only the light relevant to
the phase that is in progress will remain lit.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle from the
beginning.
If it is necessary to drain the water in order to change
the programme in progress, proceed as follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the SKIP/RESET button repeatedly, until
only the DRAIN light
• press the START/PAUSE button again.
When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.
34
. The relevant
remains lit;
- Quick Links:
- Control Panel
- Something Not Working
Hide quick links:
Advertisement
Table of Contents
