Table of Contents
Advertisement
EBU00774
Parking brake adjustment
Parking brake adjustment may be required if
the parking brake does not hold properly.
1. Fully loosen the parking brake cable
adjusting bolt locknut and the adjusting
bolt on the left lever holder.
1. Locknut
2. Loosen the adjusting bolt locknut and the
adjusting bolt on the rear brake caliper.
3. Turn the adjusting bolt on the lever holder
so that cable length "A" is 46~50 mm
(1.81~1.97 in).
q w
2. Adjusting bolt
A. Cable length
NOTE:
If the cable cannot be adjusted to specifica-
tion, consult a Yamaha dealer.
4. Tighten the adjusting bolt locknut on the
lever holder.
cC
When tightening the locknut, hold the
adjusting bolt with a wrench so that the
adjusting bolt does not turn together with
the locknut.
8-33
"A"
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
