Table of Contents
Advertisement
Operation
ESU13221
Driving
EWS00300
WARNING
Be sure to read the "SAFETY INFORMA-
TION" section on page 5 and the "Riding
your snowmobile" section on page 33
carefully before operating the snowmo-
bile.
TIP
Make sure that the engine is warmed up
enough before riding.
EWS00310
WARNING
Make sure that the throttle lever is fully
G
released and the snowmobile is at a full
stop before shifting.
Be sure to slide the shift lever to "FWD"
G
or "REV" until it stops completely and
only while the engine is idling.
Make sure that the area behind the
G
snowmobile is clear before reversing.
Watch behind.
Reduce speed and avoid sharp turning
G
when operating the snowmobile in re-
verse.
1.
To select the desired operating position,
pull the shift lever out, slide it to "FWD" or
to "REV" until it stops, and then push it
back in. NOTICE: Do not shift from
"FWD" to "REV" or from "REV" to
"FWD" while the snowmobile is mov-
ing, as the drive train could be dam-
aged.
[ECS00811]
38
1. Pull out.
2. Slide to "FWD" (forward).
3. Push in.
1. Pull out.
2. Slide to "REV" (reverse).
3. Push in.
TIP
The reverse buzzer beeps while the shift lever
is in reverse.
2.
Release the parking brake by moving the
parking brake lever to the right.
Advertisement
Table of Contents
